Texas Instruments CD74HCT4316M96, CD74HCT4316M, CD74HCT4316E, CD74HC4316PWR, CD74HC4316M96 Datasheet

Data sheet acquired from Harris Semiconductor SCHS212

CD74HC4316,

CD74HCT4316

February 1998

High-Speed CMOS Logic Quad Analog Switch with Level Translation

		Features		Description
		•	Wide Analog-Input-Voltage Range	The Harris CD74HC4316 and CD74HCT4316 contains four
	[ /Title		VCC - VEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to 10V	independent digitally controlled analog switches that use
		•	Low “ON” Resistance	silicon-gate CMOS technology to achieve operating speeds
	(CD74			similar to LSTTL with the low power consumption of
			- 45Ω (Typ) . . . . . . . . . . . . . . . . . . . . . . . . . . .VCC = 4.5V
	HC431			standard CMOS integrated circuits.
	6,		- 35Ω (Typ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC = 6V	In addition these	devices contain logic-level			translation
			- 30Ω (Typ) . . . . . . . . . . . . . . . . . . . . . . . VCC - VEE = 9V
	CD74			circuits that provide for analog signal switching of voltages
	HCT43	• Fast Switching and Propagation Delay Times		between ±5V via 5V logic. Each switch is turned on by a
				high-level voltage on its select input (S) when the common
	16)	•	Low “OFF” Leakage Current
				Enable (E) is Low. A High E disables all switches. The digital
	/Sub-	•	Built-In “Break-Before-Make” Switching	inputs can swing between VCC and GND; the analog
	ject	•	Logic-Level Translation to Enable 5V Logic to	inputs/outputs can swing between VCC as a positive limit
	(High-			and VEE as a negative limit. Voltage ranges are shown in
			Accommodate ±5V Analog Signals
				Figures 2 and 3.
	Speed	•	Wide Operating Temperature Range . . . -55oC to 125oC	Ordering Information
	CMOS	• HC Types
			- 2V to 10V Operation		TEMP. RANGE				PKG.
				PART NUMBER	(oC)		PACKAGE		NO.
			- High Noise Immunity: NIL = 30%, NIH = 30% of VCC
				CD74HC4316E	-55 to 125		16 Ld PDIP		E16.3
			at VCC = 5V
		• HCT Types		CD74HCT4316E	-55 to 125		16 Ld PDIP		E16.3
			- Direct LSTTL Input Logic Compatibility,	CD74HC4316M	-55 to 125		16 Ld SOIC		M16.15
			VIL= 0.8V (Max), VIH = 2V (Min)
				CD74HCT4316M	-55 to 125		16 Ld SOIC		M16.15
			- CMOS Input Compatibility, Il ≤ 1μA at VOL, VOH
				NOTES:
				1. When ordering, use the entire part number. Add the suffix 96 to
				obtain the variant in the tape and reel.
				2. Wafer and die is available which meets all electrical
				specifications. Please contact your local sales office or Harris
				customer service for ordering information.

Pinout

CD74HC4316, CD74HCT4316

(PDIP, SOIC)

TOP VIEW

1Z

1

16 VCC

1Y

2

15

1S

2Y

3

14

4S

2Z

4

13

4Z

2S

5

12

4Y

3S

6

11

3Y

E

7

10 3Z

GND

8

9

VEE

CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures.	File Number 1916.1

Copyright © Harris Corporation 1998

1

CD74HC4316, CD74HCT4316

Functional Diagram

VCC

16

2

15

1Y

1S

1

1Z

5

3

2Y

2S

LOGIC

4

6

LEVEL

2Z

3S

CONV.

11

AND

3Y

14

CONTROL

4S

10

3Z

12

7

4Y

E

13

4Z

8

9

GND VEE

TRUTH TABLE

INPUTS

S

SWITCH

E

L

L

OFF

L

H

ON

H

X

OFF

NOTE:

H

= High Level Voltage

L

= Low Level Voltage

X

= Don’t Care

Logic Diagram

		nY
TO 3 OTHER	VCC
SWITCHES
	LOGIC	VCC
E	LEVEL	nZ
	CONV.	VEE
nS	VEE

FIGURE 1. ONE SWITCH

2

CD74HC4316, CD74HCT4316

Absolute Maximum Ratings

DC Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 7V DC Supply Voltage, VCC - VEE. . . . . . . . . . . . . . . . . . -0.5V to 10.5V DC Supply Voltage, VEE . . . . . . . . . . . . . . . . . . . . . . . . 0.5V to -7V DC Input Diode Current, IIK

For VI < -0.5V or VI > VCC 0.5V. . . . . . . . . . . . . . . . . . . . . . . .±20mA DC Switch Diode Current, IOK

For VI < VEE -0.5V or VI < VCC + 0.5V . . . . . . . . . . . . . . . . .±25mA DC Switch Diode Current

For VI > VEE -0.5V or VI < VCC + 0.5V . . . . . . . . . . . . . . . . .±25mA DC Output Diode Current, IOK

For VO < -0.5V or VO > VCC + 0.5V . . . . . . . . . . . . . . . . . . . .±20mA DC Output Source or Sink Current per Output Pin, IO

For VO > -0.5V or VO < VCC + 0.5V . . . . . . . . . . . . . . . . . . . .±25mA DC VCC or Ground Current, ICC . . . . . . . . . . . . . . . . . . . . . . . . .±50mA

Thermal Information
Thermal Resistance (Typical, Note 3)	θJA (oC/W)
PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. 90
SOICSC Package . . . . . . . . . . . . . . . . . . . . . . . . .	. 115
Maximum Junction Temperature (Plastic Package) .	. . . . . . . 150oC
Maximum Storage Temperature Range . . . . . . . . . .	-65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . .	. . . . . . . 300oC

Operating Conditions

Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC Supply Voltage Range, VCC

HC Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2V to 6V HCT Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5V to 5.5V

Supply Voltage Range, VCC - VEE

HC, HCT Types (Figure 2) . . . . . . . . . . . . . . . . . . . . . . .2V to 10V Supply Voltage Range, VEE

HC, HCT Types (Figure 3) . . . . . . . . . . . . . . . . . . . . . . . 0V to -6V

DC Input or Output Voltage, VI . . . . . . . . . . . . . . . . . . . GND to VCC Analog Switch I/O Voltage, VIS. . . . . . . . . . . . . . . . . . . . . VEE (Min)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC (Max) Input Rise and Fall Time, tr, tf

2V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000ns (Max) 4.5V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500ns (Max) 6V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400ns (Max)

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

NOTE:

3. θJA is measured with the component mounted on an evaluation PC board in free air.

Recommended Operating Area as a Function of Supply Voltage

	8								8
VCC - GND	6						HCT	VCC - GND	6	HCT
(V)	4	HC						(V)	4	HC
	2								2
	0	0	2	4	6	8	10 12		0	0 -2 -4 -6 -8
				VCC - VEE (V)						VEE - GND (V)

FIGURE 2.

FIGURE 3.

3