Texas Instruments TLV2254AMWB, TLV2254AMFKB, TLV2254AMJB, TLV2254AIPWR, TLV2254AIPWLE Datasheet

					TLV225x, TLV225xA
			Advanced LinCMOS			RAIL-TO-RAIL
VERY LOW-POWER OPERATIONAL AMPLIFIERS
				SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999
D Output Swing Includes Both Supply Rails		D Low Input Offset Voltage
D Low Noise . . . 19 nV/√ Hz Typ at f = 1 kHz				850 V Max at TA = 25°C
D Low Input Bias Current . . . 1 pA Typ		D Wide Supply Voltage Range
				2.7 V to 8 V
D Fully Specified for Both Single-Supply and
		D Macromodel Included
Split-Supply Operation
D Very Low Power . . . 34 A Per Channel Typ		D Available in Q-Temp Automotive
D Common-Mode Input Voltage Range			HighRel Automotive Applications
			Configuration Control / Print Support
Includes Negative Rail
			Qualification to Automotive Standards
description				HIGH-LEVEL OUTPUT VOLTAGE
The TLV2252 and TLV2254 are dual and					vs
				HIGH-LEVEL OUTPUT CURRENT
quadruple low-voltage operational amplifiers from
			3
Texas Instruments. Both devices exhibit rail-to-rail
						VDD = 3 V
output performance for increased dynamic range
in singleor split-supply applications. The	± V		2.5
TLV225x family consumes only 34 A of supply					TA = ± 40°C
current per channel. This micropower operation	Voltage
			2
makes them good choices for battery-powered						TA = 25°C
applications. This family is fully characterized at
3 V and 5 V and is optimized for low-voltage	Output		1.5
applications. The noise performance has been
						TA = 85°C
dramatically improved over previous generations	Level
of CMOS amplifiers. The TLV225x has a noise			1
level of 19 nV/√ Hz at 1kHz, four times lower than	-
	High					°
competitive micropower solutions.						TA = 125 C
	±		0.5
The TLV225x, exhibiting high input impedance	OH
	V
and low noise, are excellent for small-signal
			0
conditioning for high-impedance sources, such as				200	400	600	800
piezoelectric transducers. Because of the micro-			0
				| IOH | ± High-Level Output Current ± A
power dissipation levels combined with 3-V
operation, these devices work well in hand-held					Figure 1
monitoring and remote-sensing applications. In

addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLV225xA family is available and has a maximum input offset voltage of 850 V.

The TLV2252/4 also make great upgrades to the TLV2322/4 in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If your design requires single amplifiers, please see the TLV2211/21/31 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

Advanced LinCMOS is a trademark of Texas Instruments Incorporated.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Copyright 1999, Texas Instruments Incorporated

On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

1

TLV225x, TLV225xA

Advanced LinCMOS RAIL-TO-RAIL

VERY LOW-POWER OPERATIONAL AMPLIFIERS

SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999

TLV2252 AVAILABLE OPTIONS

					PACKAGED DEVICES
		VIOmax
TA			SMALL	CHIP	CERAMIC	PLASTIC	TSSOP³	CERAMIC
		AT 25°C	OUTLINE²	CARRIER	DIP	DIP		FLATPACK
							(PW)
			(D)	(FK)	(JG)	(P)		(U)
±40°C to 125°C		850 V	TLV2252AID	Ð	Ð	TLV2252AIP	TLV2252AIPWLE	Ð
		1500 V	TLV2252ID	Ð	Ð	TLV2252IP	Ð	Ð
±40°C to 125°C		850 V	TLV2252AQD	Ð	Ð	Ð	Ð	Ð
		1500 V	TLV2252QD	Ð	Ð	Ð	Ð	Ð
± 55°C to 125°C		850 V	Ð	TLV2252AMFK	TLV2252AMJG	Ð	Ð	TLV2252AMU
		1500 V	Ð	TLV2252MFK	TLV2252MJG	Ð	Ð	TLV2252MU
² The D packages are available taped and reeled. Add R suffix to device type (e.g., TLV2252CDR).
³ The PW package is available only left-end taped and reeled.
§ Chips are tested at 25°C.
				TLV2254 AVAILABLE OPTIONS
					PACKAGED DEVICES
		VIOmax
TA			SMALL	CHIP	CERAMIC	PLASTIC	TSSOP³	CERAMIC
		AT 25°C	OUTLINE²	CARRIER	DIP	DIP		FLATPACK
							(PW)
			(D)	(FK)	(J)	(N)		(W)
±40°C to 125°C		850 V	TLV2254AID	Ð	Ð	TLV2254AIN	TLV2254AIPWLE	Ð
		1500 V	TLV2254ID	Ð	Ð	TLV2254IN	Ð	Ð
±40°C to 125°C		850 V	TLV2254AQD	Ð	Ð	Ð	Ð	Ð
		1500 V	TLV2254QD	Ð	Ð	Ð	Ð	Ð
± 55°C to 125°C		850 V	Ð	TLV2254AMFK	TLV2254AMJ	Ð	Ð	TLV2254AMW
		1500 V	Ð	TLV2254MFK	TLV2254MJ	Ð	Ð	TLV2254MW

² The D packages are available taped and reeled. Add R suffix to device type (e.g., TLV2254CDR). ³ The PW package is available only left-end taped and reeled.

§ Chips are tested at 25°C.

2	POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

TLV225x, TLV225xA

Advanced LinCMOS RAIL-TO-RAIL

VERY LOW-POWER OPERATIONAL AMPLIFIERS

SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999

TLV2252I, TLV2252AI

TLV2252Q, TLV2252AQ

D, P, OR PW PACKAGE

TLV2254I, TLV2254AI, TLV2254Q, TLV2254AQ . . . D OR N PACKAGE

(TOP VIEW) TLV2254M, TLV2254AM . . . J OR W PACKAGE (TOP VIEW)

1OUT			1	8		VDD +	1OUT					4OUT
									1	14
1IN ±			2	7		2OUT	1IN ±		2	13		4IN ±
1IN +			3	6		2IN ±	1IN +		3	12		4IN +
VDD ±/GND			4	5		2IN +	VDD +		4	11		VDD ±/ GND
							2IN +		5	10		3IN +
TLV2252M, TLV2252AM . . . JG PACKAGE							2IN ±		6	9		3IN ±
1OUT			(TOP VIEW)			VDD +	2OUT		7	8		3OUT
			1	8
1IN ±			2	7		2OUT
1IN +			3	6		2IN ±
VDD ±/GND			4	5		2IN +	TLV2254I, TLV2254AI . . . PW PACKAGE
									(TOP VIEW)

TLV2252M, TLV2252AM . . . U PACKAGE

(TOP VIEW)

	NC	1		10	NC
1OUT		2		9	VCC +
	1IN ±	3		8	2OUT
	1IN +	4		7	2IN ±
VCC ±/GND		5		6	2IN +
TLV2252M, TLV2252AM . . . FK PACKAGE
		(TOP VIEW)
	NC	1OUT	NC	DD+	NC
				V
NC	3	2	1	20 19		NC
	4				18
1IN ±	5				17	2OUT
NC	6				16	NC
1IN +	7				15	2IN ±
NC	8				14	NC
	9	10 11 12 13
	NC	/GND	NC	2IN+ NC
		DD±
		V

1OUT	1	14			4OUT
1IN ±					4IN ±
1IN +					4IN +
VDD+					VDD ±/ GND
2IN +					3IN +
2IN ±					3IN ±
2OUT	7	8			3OUT

TLV2254M, TLV2254AM . . . FK PACKAGE
		(TOP VIEW)
	1IN ±	1OUT	NC	4OUT	4IN ±
1IN+	3	2	1	20 19		4IN+
	4				18
NC	5				17	NC
VDD+	6				16	VDD ±/ GND
NC	7				15	NC
2IN+	8				14	3IN+
	9	10 11 12 13
	2IN ±	2OUT	NC	3OUT	3IN ±

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

3

4

75265 TEXAS DALLAS, •655303 BOX OFFICE POST

equivalent schematic (each amplifier)
					VDD +
	Q3	Q6		Q9	Q12	Q14	Q16
IN +				R6
					C1		OUT
IN ±					R5
Q1		Q4
					Q13	Q15	Q17
							D1
Q2	Q5	Q7	Q8	Q10	Q11
R3	R4				R1	R2
					VDD ± / GND

ACTUAL DEVICE COMPONENT COUNT²

COMPONENT	TLV2252	TLV2254
Transistors	38	76
Resistors	30	56
Diodes	9	18
Capacitors	3	6

² Includes both amplifiers and all ESD, bias, and trim circuitry

TLV2252xA TLV225x, RAIL-TO-RAIL LinCMOS Advanced AMPLIFIERS OPERATIONAL POWER-LOW VERY 1999 JULY REVISED ± 1997 FEBRUARY ± SLOS185B

7±11±94 Date: Release Template

TLV225x, TLV225xA

Advanced LinCMOS RAIL-TO-RAIL

VERY LOW-POWER OPERATIONAL AMPLIFIERS

SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)²

Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . 8 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . ± VDD
Input voltage range, VI (any input, see Note 1) . . . . . . . . . . . . . . . .	. . . . . . . . . . . . . . . . . . VDD ±±0.3 V to VDD+
Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . ± 5 mA
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . ± 50 mA
Total current into VDD + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . ± 50 mA
Total current out of VDD ± . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . ± 50 mA
Duration of short-circuit current (at or below) 25°C (see Note 3) .	. . . . . . . . . . . . . . . . . . . . . . . .	. . . . . unlimited
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: I Suffix . . . . . . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . .	±40°C to 125°C
Q Suffix . . . . . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . .	±40°C to 125°C
M Suffix . . . . . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . .	±55°C to 125°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . .	±65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, P, and PW packages		. . . . . . . 260°C
	J, JG, U, and W packages	. . . . . . . 300°C

²Stresses beyond those listed under ªabsolute maximum ratingsº may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under ªrecommended operating conditionsº is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to VDD ±.

2.Differential voltages are at the noninverting input with respect to the inverting input. Excessive current flows when input is brought below VDD ± ± 0.3 V.

3.The output may be shorted to either supply. Temperature and /or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded.

			DISSIPATION RATING TABLE
	PACKAGE	TA ≤ 25°C	DERATING FACTOR	TA = 85°C	TA = 125°C
		POWER RATING	ABOVE TA = 25°C	POWER RATING	POWER RATING
	D±8	725 mW	5.8 mW/°C	377 mW	145 mW
	D±14	950 mW	7.6 mW/°C	494 mW	190 mW
	FK	1375 mW	11.0 mW/°C	715 mW	275 mW
	J	1375 mW	11.0 mW/°C	715 mW	275 mW
	JG	1050 mW	8.4 mW/°C	546 mW	210 mW
	N	1150 mW	9.2 mW/°C	598 mW	230 mW
	P	1000 mW	8.0 mW/°C	520 mW	200 mW
	PW±8	525 mW	4.2 mW/°C	273 mW	105 mW
	PW±14	700 mW	5.6 mW/°C	364 mW	140 mW
	U	700 mW	5.5 mW/°C	370 mW	150 mW
	W	700 mW	5.5 mW/°C	370 mW	150 mW

recommended operating conditions

	TLV225xI		TLV225xQ		TLV225xM		UNIT
	MIN	MAX	MIN	MAX	MIN	MAX
Supply voltage, VDD (see Note 1)	2.7	8	2.7	8	2.7	8	V
Input voltage range, VI	VDD ±	VDD + ± 1.3	VDD ±	VDD + ± 1.3	VDD ±	VDD + ± 1.3	V
Common-mode input voltage, VIC	VDD ±	VDD + ± 1.3	VDD ±	VDD + ± 1.3	VDD ±	VDD + ± 1.3	V
Operating free-air temperature, TA	± 40	125	± 40	125	± 55	125	°C

NOTE 1: All voltage values, except differential voltages, are with respect to VDD ±.

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

5

TLV225x, TLV225xA

Advanced LinCMOS RAIL-TO-RAIL

VERY LOW-POWER OPERATIONAL AMPLIFIERS

SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999

TLV2252I electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)

PARAMETER

TEST CONDITIONS

T ²

TLV2252I

TLV2252AI

UNIT

A

MIN

TYP

MAX

MIN

TYP

MAX

VIO

Input offset voltage

25°C

200

1500

200

850

V

Full range

1750

1000

αVIO

Temperature coefficient

25°C

0.5

0.5

µV/°C

of input offset voltage

to 85°C

Input offset voltage

long-term drift (see

25°C

0.003

0.003

µV/mo

Note 4)

VDD ± = ± 1.5 V, VIC = 0,

25°C

0.5

0.5

VO = 0,

RS = 50 Ω

IIO

Input offset current

±40°C

150

150

pA

to 85°C

Full range

1000

1000

25°C

1

1

IIB

Input bias current

±40°C

150

150

pA

to 85°C

Full range

1000

1000

25°C

0

± 0.3

0

± 0.3

to

to

to

to

VICR

Common-mode input

RS = 50 Ω,

|VIO | ≤ 5 mV

2

2.2

2

2.2

V

voltage range

0

0

Full range

to

to

1.7

1.7

IOH = ± 20 µA

25°C

2.98

2.98

VOH

High-level output

IOH = ±75 A

25°C

2.9

2.9

V

voltage

Full range

2.8

2.8

IOH = ± 150 µA

25°C

2.8

2.8

VIC = 1.5 V,

IOL = 50 µA

25°C

10

10

Low-level output

VIC = 1.5 V,

IOL = 500 A

25°C

100

100

VOL

Full range

150

150

mV

voltage

VIC = 1.5 V,

IOL = 1 mA

25°C

200

200

Full range

300

300

Large-signal differential

VIC = 1.5 V,

RL = 100 kΩ³

25°C

100

250

100

250

AVD

Full range

10

10

V/mV

voltage amplification

VO = 1 V to 2 V

RL = 1 MΩ³

25°C

800

800

ri(d)

Differential input

25°C

1012

1012

Ω

resistance

ri(c)

Common-mode input

25°C

1012

1012

Ω

resistance

ci(c)

Common-mode input

f = 10 kHz,

P package

25°C

8

8

pF

capacitance

zo

Closed-loop output

f = 25 kHz,

AV = 10

25°C

220

220

Ω

impedance

CMRR

Common-mode

VIC = 0 to 1.7 V,

= 50 Ω

25°C

65

75

65

77

dB

rejection ratio

V = 1.5 V,

R

S

Full range

60

60

O

² Full range is ± 40°C to 125°C. ³ Referenced to 1.5 V

NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

6	POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

TLV225x, TLV225xA

Advanced LinCMOS RAIL-TO-RAIL

VERY LOW-POWER OPERATIONAL AMPLIFIERS

SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999

TLV2252I electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted) (continued)

	PARAMETER	TEST CONDITIONS		T ²		TLV2252I			TLV2252AI		UNIT
				A	MIN	TYP	MAX	MIN	TYP	MAX
kSVR	Supply voltage	VDD = 2.7 V to 8 V,		25°C	80	95		80	100		dB
	rejection ratio
		VIC = VDD /2,	No load	Full range	80			80
	( VDD / VIO)
IDD	Supply current	VO = 1.5 V,	No load	25°C		68	125		68	125	A
				Full range			150			150

² Full range is ± 40°C to 125°C.

TLV2252I operating characteristics at specified free-air temperature, VDD = 3 V

PARAMETER

TEST CONDITIONS

T ²

TLV2252I

TLV2252AI

UNIT

A

MIN

TYP MAX

MIN

TYP

MAX

VO = 1.1 V to 1.9 V,

25°C

0.07

0.1

0.07

0.1

SR

Slew rate at unity gain

RL = 100 kΩ³ ,

Full

V/µs

CL = 100 pF³

range

0.05

0.05

Vn

Equivalent input noise

f = 10 Hz

25°C

35

35

nV/√ Hz

voltage

f = 1 kHz

25°C

19

19

VN(PP)

Peak-to-peak

f = 0.1 Hz to 1 Hz

25°C

0.6

0.6

µV

equivalent input noise

f = 0.1 Hz to 10 Hz

25°C

1.1

1.1

voltage

Equivalent input noise

25°C

In

0.6

0.6

fA /√ Hz

current

Gain-bandwidth product

f = 1 kHz,

RL = 50 kΩ³ ,

25°C

0.187

0.187

MHz

CL = 100 pF³

BOM

Maximum output-swing

VO(PP) = 1 V,

AV = 1,

25°C

60

60

kHz

bandwidth

RL = 50 kΩ³ ,

CL = 100 pF³

φm

Phase margin at unity

25°C

63°

63°

gain

RL = 50 kΩ³ ,

CL = 100 pF³

Gain margin

25°C

15

15

dB

²	Full range is ± 40°C to 125°C.
³	Referenced to 1.5 V

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

7

TLV225x, TLV225xA

Advanced LinCMOS RAIL-TO-RAIL

VERY LOW-POWER OPERATIONAL AMPLIFIERS

SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999

TLV2252I electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)

PARAMETER

TEST CONDITIONS

T ²

TLV2252I

TLV2252AI

UNIT

A

MIN

TYP

MAX

MIN

TYP

MAX

VIO

Input offset voltage

25°C

200

1500

200

850

µV

Full range

1750

1000

αVIO

Temperature coefficient

25°C

0.5

0.5

µV/°C

of input offset voltage

to 85°C

Input offset voltage long-

25°C

0.003

0.003

µV/mo

term drift (see Note 4)

VDD ± = ± 2.5 V,

VIC = 0,

25°C

0.5

0.5

IIO

Input offset current

VO = 0,

RS = 50 Ω

±40°C

150

150

pA

to 85°C

Full range

1000

1000

25°C

1

1

IIB

Input bias current

±40°C

150

150

pA

to 85°C

Full range

1000

1000

0

± 0.3

0

± 0.3

25°C

to

to

to

to

VICR

Common-mode input

|VIO | ≤ 5 mV,

RS = 50 Ω

4

4.2

4

4.2

V

voltage range

0

0

Full range

to

to

3.5

3.5

IOH = ± 20 µA

25°C

4.98

4.98

VOH

High-level output voltage

IOH = ±75 µA

25°C

4.9

4.94

4.9

4.94

V

Full range

4.8

4.8

IOH = ± 150 µA

25°C

4.8

4.88

4.8

4.88

VIC = 2.5 V,

IOL = 50 µA

25°C

0.01

0.01

VIC = 2.5 V,

IOL = 500 µA

25°C

0.09

0.15

0.09

0.15

VOL

Low-level output voltage

Full range

0.15

0.15

V

VIC = 2.5 V,

IOL = 1 mA

25°C

0.2

0.3

0.2

0.3

Full range

0.3

0.3

Large-signal differential

V = 2.5 V,

RL = 100 kΩ³

25°C

100

350

100

350

AVD

IC

Full range

10

10

V/mV

voltage amplification

VO = 1 V to 4 V

RL = 1 MΩ³

25°C

1700

1700

ri(d)

Differential input

25°C

1012

1012

Ω

resistance

ri(c)

Common-mode input

25°C

1012

1012

Ω

resistance

ci(c)

Common-mode input

f = 10 kHz,

P package

25°C

8

8

pF

capacitance

zo

Closed-loop output

f = 25 kHz,

AV = 10

25°C

200

200

Ω

impedance

CMRR

Common-mode rejection

VIC = 0 to 2.7 V,

VO = 2.5 V,

25°C

70

83

70

83

dB

ratio

RS = 50 Ω

Full range

70

70

² Full range is ± 40°C to 125°C. ³ Referenced to 2.5 V

NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

8	POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

TLV225x, TLV225xA

Advanced LinCMOS RAIL-TO-RAIL

VERY LOW-POWER OPERATIONAL AMPLIFIERS

SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999

TLV2252I electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted) (continued)

	PARAMETER	TEST CONDITIONS		T ²		TLV2252I		TLV2252AI			UNIT
				A	MIN	TYP	MAX	MIN	TYP	MAX
kSVR	Supply voltage rejection	VDD = 4.4 V to 8 V,		25°C	80	95		80	95		dB
	ratio ( VDD / VIO)	VIC = VDD /2,	No load	Full range	80			80
IDD	Supply current	VO = 2.5 V,	No load	25°C		70	125		70	125	A
				Full range			150			150
² Full range is ± 40°C to 125°C.

TLV2252I operating characteristics at specified free-air temperature, VDD = 5 V

PARAMETER

TEST CONDITIONS

T ²

TLV2252I

TLV2252AI

UNIT

A

MIN

TYP MAX

MIN

TYP

MAX

°

0.07

0.12

0.07

0.12

VO = 1.5 V to 3.5 V,

RL = 100 kΩ³ ,

25 C

SR

Slew rate at unity gain

Full

V/µs

CL = 100 pF³

0.05

0.05

range

Vn

Equivalent input noise

f = 10 Hz

25°C

36

36

nV/√ Hz

voltage

f = 1 kHz

25°C

19

19

Peak-to-peak

f = 0.1 Hz to 1 Hz

25°C

0.7

0.7

µV

VN(PP)

equivalent input

f = 0.1 Hz to 10 Hz

25°C

1.1

1.1

noise voltage

Equivalent input noise

25°C

In

0.6

0.6

fA /√ Hz

current

Total harmonic

VO = 0.5 V to 2.5 V,

A

= 1

0.2%

0.2%

THD + N

f = 20 kHz,

V

25°C

distortion plus noise

RL = 50 kΩ³

AV = 10

1%

1%

Gain-bandwidth

f = 50 kHz,

RL = 50 kΩ³ ,

25°C

0.2

0.2

MHz

product

CL = 100 pF³

BOM

Maximum output-swing

VO(PP) = 2 V,

AV

= 1,

25°C

30

30

kHz

bandwidth

RL = 50 kΩ³,

CL = 100 pF³

φm

Phase margin at unity

25°C

63°

63°

gain

RL = 50 kΩ³ ,

CL = 100 pF³

Gain margin

25°C

15

15

dB

² Full range is ± 40°C to 125°C. ³ Referenced to 2.5 V

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

9

TLV225x, TLV225xA

Advanced LinCMOS RAIL-TO-RAIL

VERY LOW-POWER OPERATIONAL AMPLIFIERS

SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999

TLV2254I electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)

	PARAMETER	TEST CONDITIONS		T ²		TLV2254I			TLV2254AI		UNIT
				A	MIN	TYP	MAX	MIN	TYP	MAX
VIO	Input offset voltage			25°C		200	1500		200	850	µV
				Full range			1750			1000
	Temperature			25°C
αVIO	coefficient of input					0.5			0.5		µV/°C
				to 85°C
	offset voltage
	Input offset voltage
	long-term drift			25°C		0.003			0.003		µV/mo
	(see Note 4)	VDD ± = ± 1.5 V,	VIC = 0,
		VO = 0,	RS = 50 Ω	25°C		0.5			0.5
IIO	Input offset current			±40°C			150			150	pA
				to 85°C
				Full range			1000			1000
				25°C		1			1
IIB	Input bias current			±40°C			150			150	pA
				to 85°C
				Full range			1000			1000
				25°C	0	± 0.3		0	± 0.3
	Common-mode input	RS = 50 Ω,			to 2	to 2.2		to 2	to 2.2
VICR			|VIO | ≤ 5 mV								V
	voltage range			Full range	0			0
					to 1.7			to 1.7
		IOH = ± 20 µA		25°C		2.98			2.98
VOH	High-level output	IOH = ±75 µA		25°C	2.9			2.9			V
	voltage			Full range	2.8			2.8
		IOH = ± 150 µA		25°C	2.8			2.8
		VIC = 1.5 V,	IOL = 50 µA	25°C		10			10
	Low-level output	VIC = 1.5 V,	IOL = 500 µA	25°C		100			100
VOL				Full range			150			150	mV
	voltage
		VIC = 1.5 V,	IOL = 1 mA	25°C		200			200
				Full range			300			300
	Large-signal	VIC = 1.5 V,	RL = 100 kΩ³	25°C	100	225		100	225
AVD	differential voltage			Full range	10			10			V/mV
		VO = 1 V to 2 V
	amplification		RL = 1 MΩ³	25°C		800			800
ri(d)	Differential input			25°C		1012			1012		Ω
	resistance
ri(c)	Common-mode input			25°C		1012			1012		Ω
	resistance
ci(c)	Common-mode input	f = 10 kHz,	N package	25°C		8			8		pF
	capacitance
zo	Closed-loop output	f = 25 kHz,	AV = 10	25°C		220			220		Ω
	impedance
CMRR	Common-mode	VIC = 0 to 1.7 V,	VO = 1.5 V,	25°C	65	75		65	77		dB
	rejection ratio	RS = 50 Ω		Full range	60			60

² Full range is ± 40°C to 125°C. ³ Referenced to 1.5 V

NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

10	POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

TLV225x, TLV225xA

Advanced LinCMOS RAIL-TO-RAIL

VERY LOW-POWER OPERATIONAL AMPLIFIERS

SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999

TLV2254I electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted) (continued)

	PARAMETER	TEST CONDITIONS		T ²		TLV2254I			TLV2254AI		UNIT
				A	MIN	TYP	MAX	MIN	TYP	MAX
	Supply voltage	VDD = 2.7 V to 8 V,		25°C	80	95		80	100
kSVR rejection ratio											dB
		VIC = VDD /2,	No load	Full range	80			80
	( VDD / VIO)
IDD	Supply current	VO = 1.5 V,	No load	25°C		135	250		135	250	A
	(four amplifiers)			Full range			300			300

² Full range is ± 40°C to 125°C.

TLV2254I operating characteristics at specified free-air temperature, VDD = 3 V

PARAMETER

TEST CONDITIONS

T ²

TLV2254I

TLV2254AI

UNIT

A

MIN

TYP MAX

MIN

TYP

MAX

VO = 0.7 V to 1.7 V,

25°C

0.07

0.1

0.07

0.1

SR

Slew rate at unity gain

RL = 100 kΩ³ ,

V/µs

CL = 100 pF³

Full range

0.05

0.05

Vn

Equivalent input noise voltage

f = 10 Hz

25°C

35

35

nV/√

Hz

f = 1 kHz

25°C

19

19

VN(PP)

Peak-to-peak equivalent input

f = 0.1 Hz to 1 Hz

25°C

0.6

0.6

µV

noise voltage

f = 0.1 Hz to 10 Hz

25°C

1.1

1.1

In

Equivalent input noise current

25°C

0.6

0.6

fA /√

Hz

f = 1 kHz,

³

Gain-bandwidth product

RL = 50 kΩ

,

°

0.187

0.187

MHz

25 C

CL = 100 pF ³

VO(PP) = 1 V,

BOM

Maximum output-swing

AV = 1,

25°C

60

60

kHz

bandwidth

RL = 50 kΩ³ ,

CL = 100 pF ³

φm

Phase margin at unity gain

RL = 50 kΩ³ ,

25°C

63°

63°

Gain margin

CL = 100 pF ³

25°C

15

15

dB

² Full range is ± 40°C to 85°C. ³ Referenced to 1.5 V

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

11

TLV225x, TLV225xA

Advanced LinCMOS RAIL-TO-RAIL

VERY LOW-POWER OPERATIONAL AMPLIFIERS

SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999

TLV2254I electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)

	PARAMETER	TEST CONDITIONS		T ²		TLV2254I		TLV2254AI			UNIT
				A	MIN	TYP	MAX	MIN	TYP	MAX
VIO	Input offset voltage			25°C		200	1500		200	850	µV
				Full range			1750			1000
	Temperature			25°C
αVIO	coefficient of input					0.5			0.5		µV/°C
				to 85°C
	offset voltage
	Input offset voltage
	long-term drift			25°C		0.003			0.003		µV/mo
	(see Note 4)	VDD ± = ± 2.5 V,	VIC = 0,
		VO = 0,	RS = 50 Ω	25°C		0.5			0.5
IIO	Input offset current			±40°C			150			150	pA
				to 85°C
				Full range			1000			1000
				25°C		1			1
IIB	Input bias current			±40°C			150			150	pA
				to 85°C
				Full range			1000			1000
				25°C	0	± 0.3		0	± 0.3
	Common-mode input				to 4	to 4.2		to 4	to 4.2
VICR		|VIO | ≤ 5 mV,	RS = 50 Ω								V
	voltage range			Full range	0			0
					to 3.5			to 3.5
		IOH = ± 20 µA		25°C		4.98			4.98
VOH	High-level output	IOH = ±75 µA		25°C	4.9	4.94		4.9	4.94		V
	voltage			Full range	4.8			4.8
		IOH = ± 150 µA		25°C	4.8	4.88		4.8	4.88
		VIC = 2.5 V,	IOL = 50 µA	25°C		0.01			0.01
	Low-level output	VIC = 2.5 V,	IOL = 500 µA	25°C		0.09	0.15		0.09	0.15
VOL				Full range			0.15			0.15	V
	voltage
		VIC = 2.5 V,	IOL = 1 mA	25°C		0.2	0.3		0.2	0.3
				Full range			0.3			0.3
	Large-signal	VIC = 2.5 V,	RL = 100 kΩ³	25°C	100	350		100	350
AVD	differential voltage			Full range	10			10			V/mV
		VO = 1 V to 4 V
	amplification		RL = 1 MΩ³	25°C		1700			1700
ri(d)	Differential input			25°C		1012			1012		Ω
	resistance
ri(c)	Common-mode input			25°C		1012			1012		Ω
	resistance
ci(c)	Common-mode input	f = 10 kHz,	N package	25°C		8			8		pF
	capacitance
zo	Closed-loop output	f = 25 kHz,	AV = 10	25°C		200			200		Ω
	impedance
CMRR	Common-mode	VIC = 0 to 2.7 V,	VO = 2.5 V,	25°C	70	83		70	83		dB
	rejection ratio	RS = 50 Ω		Full range	70			70

² Full range is ± 40°C to 125°C. ³ Referenced to 2.5 V

NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

12	POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

TLV225x, TLV225xA

Advanced LinCMOS RAIL-TO-RAIL

VERY LOW-POWER OPERATIONAL AMPLIFIERS

SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999

TLV2254I electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted) (continued)

	PARAMETER	TEST CONDITIONS		T ²		TLV2254I		TLV2254AI			UNIT
				A	MIN	TYP	MAX	MIN	TYP	MAX
	Supply voltage	VDD = 4.4 V to 8 V,		25°C	80	95		80	95
kSVR rejection ratio											dB
		VIC = VDD /2,	No load	Full range	80			80
	( VDD / VIO)
IDD	Supply current	VO = 2.5 V,	No load	25°C		140	250		140	250	µA
	(four amplifiers)			Full range			300			300

² Full range is ± 40°C to 125°C.

TLV2254I operating characteristics at specified free-air temperature, VDD = 5 V

PARAMETER

TEST CONDITIONS

T ²

TLV2254I

TLV2254AI

UNIT

A

MIN

TYP MAX

MIN

TYP

MAX

Slew rate at unity

VO = 1.4 V to 2.6 V,

RL = 100 kΩ ³ ,

25°C

0.07

0.12

0.07

0.12

SR

Full

0.05

0.05

V/µs

gain

CL = 100 pF ³

range

Vn

Equivalent input

f = 10 Hz

25°C

36

36

nV/√ Hz

noise voltage

f = 1 kHz

25°C

19

19

Peak-to-peak

f = 0.1 Hz to 1 Hz

25°C

0.7

0.7

µV

VN(PP)

equivalent input

f = 0.1 Hz to 10 Hz

25°C

1.1

1.1

noise voltage

Equivalent input

25°C

In

0.6

0.6

fA /√ Hz

noise current

Total harmonic

VO = 0.5 V to 2.5 V,

A = 1

0.2%

0.2%

THD + N

distortion plus

f = 20 kHz,

V

25°C

noise

RL = 50 kΩ ³

AV = 10

1%

1%

Gain-bandwidth

f = 50 kHz,

RL = 50 kΩ ³ ,

25°C

0.2

0.2

MHz

product

CL = 100 pF ³

BOM

Maximum output-

VO(PP) = 2 V,

AV = 1,

25°C

30

30

kHz

swing bandwidth

RL = 50 kΩ ³ ,

CL = 100 pF ³

φm

Phase margin at

25°C

63°

63°

unity gain

RL = 50 kΩ ³ ,

CL = 100 pF ³

Gain margin

25°C

15

15

dB

² Full range is ± 40°C to 125°C. ³ Referenced to 2.5 V

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

13

TLV225x, TLV225xA

Advanced LinCMOS RAIL-TO-RAIL

VERY LOW-POWER OPERATIONAL AMPLIFIERS

SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999

TLV2252Q, and TLV2252M electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)

					TLV2252Q,			TLV2252AQ,
	PARAMETER	TEST CONDITIONS		T ²	TLV2252M			TLV2252AM			UNIT
				A
					MIN	TYP	MAX	MIN	TYP	MAX
VIO	Input offset voltage			25°C		200	1500		200	850	µV
				Full range			1750			1000
αVIO	Temperature coefficient			25°C		0.5			0.5		µV/°C
	of input offset voltage			to 85°C
	Input offset voltage	VDD ± = ± 1.5 V,	VIC = 0,
	long-term drift			25°C		0.003			0.003		µV/mo
		VO = 0,	RS = 50 Ω
	(see Note 4)
IIO	Input offset current			25°C		0.5			0.5		pA
				125°C			500			500
IIB	Input bias current			25°C		1			1		pA
				125°C			500			500
				25°C	0	± 0.3		0	± 0.3
					to	to		to	to
VICR	Common-mode input	RS = 50 Ω,	|VIO | ≤ 5 mV		2	2.2		2	2.2		V
	voltage range				0			0
				Full range	to			to
					1.7			1.7
		IOH = ± 20 µA		25°C		2.98			2.98
VOH	High-level output	IOH = ±75 A		25°C	2.9			2.9			V
	voltage			Full range	2.8			2.8
		IOH = ± 150 µA		25°C	2.8			2.8
		VIC = 1.5 V,	IOL = 50 µA	25°C		10			10
	Low-level output	VIC = 1.5 V,	IOL = 500 A	25°C		100	150		100	150
VOL				Full range			165			165	mV
	voltage
		VIC = 1.5 V,	IOL = 1 mA	25°C		200	300		200	300
				Full range			300			300
	Large-signal differential	VIC = 1.5 V,	RL = 100 kΩ³	25°C	100	250		100	250
AVD				Full range	10			10			V/mV
	voltage amplification	VO = 1 V to 2 V
			RL = 1 MΩ³	25°C		800			800
ri(d)	Differential input			25°C		1012			1012		Ω
	resistance
ri(c)	Common-mode input			25°C		1012			1012		Ω
	resistance
ci(c)	Common-mode input	f = 10 kHz,	P package	25°C		8			8		pF
	capacitance
zo	Closed-loop output	f = 25 kHz,	AV = 10	25°C		220			220		Ω
	impedance
CMRR	Common-mode rejection	VIC = 0 to 1.7 V,	VO = 1.5 V,	25°C	65	75		65	77		dB
	ratio	RS = 50 Ω		Full range	60			60
kSVR	Supply voltage rejection	VDD = 2.7 V to 8 V,		25°C	80	95		80	100		dB
	ratio ( VDD / VIO)	VIC = VDD /2,	No load	Full range	80			80
IDD	Supply current	VO = 1.5 V,	No load	25°C		68	125		68	125	µA
				Full range			150			150

²	Full range is ± 40°C to 125°C for Q level part, ± 55°C to 125°C for M level part.
³	Referenced to 1.5 V

NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

14	POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

TLV225x, TLV225xA

Advanced LinCMOS RAIL-TO-RAIL

VERY LOW-POWER OPERATIONAL AMPLIFIERS

SLOS185B ± FEBRUARY 1997 ± REVISED ± JULY 1999

TLV2252Q, and TLV2252M operating characteristics at specified free-air temperature, VDD = 3 V

					TLV2252Q,		TLV2252AQ,
	PARAMETER	TEST CONDITIONS		T ²	TLV2252M		TLV2252AM		UNIT
				A
					MIN	TYP MAX	MIN	TYP MAX
		VO = 0.8 V to 1.4 V,	RL = 100 kΩ³ ,	25°C	0.07	0.1	0.07	0.1
SR	Slew rate at unity gain								V/µs
				Full
		CL = 100 pF³			0.05		0.05
				range
Vn	Equivalent input noise	f = 10 Hz		25°C		35		35
									nV/√ Hz
	voltage	f = 1 kHz		25°C		19		19
VN(PP)	Peak-to-peak	f = 0.1 Hz to 1 Hz		25°C		0.6		0.6	µV
	equivalent input
		f = 0.1 Hz to 10 Hz		25°C		1.1		1.1
	noise voltage
	Equivalent input noise			25°C
In						0.6		0.6	fA /√ Hz
	current
	Gain-bandwidth	f = 1 kHz,	³	25°C		0.187		0.187	MHz
			RL = 50 kΩ ,
	product	CL = 100 pF³
	Maximum	VO(PP) = 1 V,	AV = 1,	25°C
BOM	output-swing					60		60	kHz
		RL = 50 kΩ³ ,	CL = 100 pF³
	bandwidth
φm	Phase margin at unity			25°C		63°		63°
	gain	RL = 50 kΩ³ ,	CL = 100 pF³
	Gain margin			25°C		15		15	dB

²	Full range is ± 40°C to 125°C for Q level part, ± 55°C to 125°C for M level part.
³	Referenced to 1.5 V

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

15