April 1988
Revised July 1999
74F10
Triple 3-Input NAND Gate
General Description
This device contains three independent gates, each of which performs the logic NAND function.
Ordering Code:
Order Number |
Package Number |
Package Description |
|
|
|
74F10SC |
M14A |
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow |
|
|
|
74F10SJ |
M14D |
14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide |
|
|
|
74F10PC |
N14A |
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide |
|
|
|
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Symbol |
Connection Diagram |
|
IEEE/IEC |
Unit Loading/Fan Out
|
Pin Names |
Description |
U.L. |
Input IIH/IIL |
|
|
HIGH/LOW |
Output IOH/IOL |
|||
|
|
|
|
||
|
|
|
|
|
|
|
An, Bn, Cn |
Inputs |
1.0/1.0 |
20 μA/−0.6 mA |
|
|
|
Outputs |
50/33.3 |
−1 mA/20 mA |
|
|
O |
n |
|||
Gate NAND Input-3 Triple 74F10
© 1999 Fairchild Semiconductor Corporation |
DS009458 |
www.fairchildsemi.com |
74F10
Absolute Maximum Ratings(Note 1)
Storage Temperature |
−65°C to +150°C |
Ambient Temperature under Bias |
−55°C to +125°C |
Junction Temperature under Bias |
−55°C to +150°C |
VCC Pin Potential to Ground Pin |
−0.5V to +7.0V |
Input Voltage (Note 2) |
−0.5V to +7.0V |
Input Current (Note 2) |
−30 mA to +5.0 mA |
Voltage Applied to Output |
|
in HIGH State (with VCC = 0V) |
|
Standard Output |
−0.5V to VCC |
3-STATE Output |
−0.5V to +5.5V |
Current Applied to Output |
|
in LOW State (Max) |
twice the rated IOL (mA) |
Recommended Operating
Conditions
Free Air Ambient Temperature |
0°C to +70°C |
Supply Voltage |
+4.5V to +5.5V |
Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied.
Note 2: Either voltage limit or current limit is sufficient to protect inputs.
DC Electrical Characteristics
Symbol |
Parameter |
|
Min |
Typ |
Max |
Units |
VCC |
Conditions |
VIH |
Input HIGH Voltage |
|
2.0 |
|
|
V |
|
Recognized as a HIGH Signal |
VIL |
Input LOW Voltage |
|
|
|
0.8 |
V |
|
Recognized as a LOW Signal |
VCD |
Input Clamp Diode Voltage |
|
|
|
−1.2 |
V |
Min |
IIN = −18 mA |
VOH |
Output HIGH |
10% VCC |
2.5 |
|
|
V |
Min |
IOH = −1 mA |
|
Voltage |
5% VCC |
2.7 |
|
|
IOH = −1 mA |
||
|
|
|
|
|
||||
VOL |
Output LOW |
10% VCC |
|
|
0.5 |
V |
Min |
IOL = 20 mA |
|
Voltage |
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IIH |
Input HIGH |
|
|
|
5.0 |
μA |
Max |
VIN = 2.7V |
|
Current |
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IBVI |
Input HIGH Current |
|
|
|
7.0 |
μA |
Max |
VIN = 7.0V |
|
Breakdown Test |
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ICEX |
Output HIGH |
|
|
|
50 |
μA |
Max |
VOUT = VCC |
|
Leakage Current |
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VID |
Input Leakage |
|
4.75 |
|
|
V |
0.0 |
IID = 1.9 μA |
|
Test |
|
|
|
All other pins grounded |
|||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
IOD |
Output Leakage |
|
|
|
3.75 |
μA |
0.0 |
VIOD = 150 mV |
|
Circuit Current |
|
|
|
All other pins grounded |
|||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
IIL |
Input LOW Current |
|
|
|
−0.6 |
mA |
Max |
VIN = 0.5V |
IOS |
Output Short-Circuit Current |
|
−60 |
|
−150 |
mA |
Max |
VOUT = 0V |
ICCH |
Power Supply Current |
|
|
1.4 |
2.1 |
mA |
Max |
VO = HIGH |
ICCL |
Power Supply Current |
|
|
5.1 |
7.7 |
mA |
Max |
VO = LOW |
AC Electrical Characteristics
|
|
|
|
|
TA = +25°C |
|
TA = −55°C to +125°C |
TA = 0°C to +70°C |
|
||
Symbol |
Parameter |
|
VCC = +5.0V |
|
VCC = +5.0V |
VCC = +5.0V |
Units |
||||
|
CL = 50 pF |
|
CL = 50 pF |
CL = 50 pF |
|||||||
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Min |
Typ |
Max |
Min |
Max |
Min |
Max |
|
|
|
|
|
|
|
|
|
|
|
||
tPLH |
Propagation Delay |
2.4 |
3.7 |
5.0 |
2.0 |
7.0 |
2.4 |
6.0 |
ns |
||
tPHL |
|
|
|
1.5 |
3.2 |
4.3 |
1.5 |
6.5 |
1.5 |
5.3 |
|
An, Bn, Cn to O n |
|
||||||||||
www.fairchildsemi.com |
2 |
Loading...