|
|
UCC2800/2801/2802/2803/2804/2805 Q1 |
|
|
|
LOW POWER BICMOS CURRENT MODE PWM |
|
|
|
SGLS121C − JULY 2002 − REVISED APRIL 2008 |
|
|
|
|
|
D Qualified for Automotive Applications |
D Internal Leading-Edge Blanking of the |
||
D |
ESD Protection Exceeds 200 V Using |
Current Sense Signal |
|
|
|
|
|
|
Machine Model (C = 200 pF, R = 0) |
D 1-Amp Totem-Pole Output |
|
D 100- A Typical Starting Supply Current |
D 70-ns Typical Response from |
||
D 500- A Typical Operating Supply Current |
Current-Sense to Gate Drive Output |
||
D |
Operation to 1 MHz |
D 1.5% Tolerance Voltage Reference |
|
|
|
|
|
D |
Internal Soft Start |
D Same Pinout as UC3842 and UC3842A |
|
|
|
|
DInternal Fault Soft Start
description
The UCC2800/1/2/3/4/5 family of high-speed, low-power integrated circuits contain all of the control and drive components required for off-line and dc-to-dc fixed frequency current-mode switching power supplies with minimal parts count.
These devices have the same pin configuration as the UC2842/3/4/5 family and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.
The UCC2800/1/2/3/4/5 family offers choice of maximum duty cycle and critical voltage levels. Lower reference parts such as the UCC2803 and UCC2805 fit best into battery operated systems, while the higher reference and the higher UVLO hysteresis of the UCC2802 and UCC2804 make these ideal choices for use in off-line power supplies.
The UCC280xQDRQ1 series is specified for the automotive temperature range of −40 _C to 125_C, and qualified in accordance with AEC-Q100 stress test qualification for integrated circuits.
PART NUMBER |
MAXIMUM DUTY CYCLE |
REFERENCE VOLTAGE |
TURN-ON THRESHOLD |
TURN-OFF THRESHOLD |
|
|
|
|
|
UCC2800 |
100% |
5 V |
7.2 V |
6.9 V |
|
|
|
|
|
UCC2801 |
50% |
5 V |
9.4 V |
7.4 V |
|
|
|
|
|
UCC2802 |
100% |
5 V |
12.5 V |
8.3 V |
|
|
|
|
|
UCC2803 |
100% |
4 V |
4.1 V |
3.6 V |
|
|
|
|
|
UCC2804 |
50% |
5 V |
12.5 V |
8.3 V |
|
|
|
|
|
UCC2805 |
50% |
4 V |
4.1 V |
3.6 V |
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. |
Copyright 2008, Texas Instruments Incorporated |
Products conform to specifications per the terms of Texas Instruments |
|
standard warranty. Production processing does not necessarily include |
|
testing of all parameters. |
|
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 |
1 |
UCC2800/2801/2802/2803/2804/2805 Q1 |
|
|
|
|
|
|||
LOW POWER BICMOS CURRENT MODE PWM |
|
|
|
|
||||
SGLS121C − JULY 2002 − REVISED APRIL 2008 |
|
|
|
|
|
|
||
block diagram |
|
|
|
|
|
|
|
|
|
|
|
FB |
COMP |
|
CS |
|
|
|
|
|
2 |
1 |
|
3 |
|
|
|
|
|
|
|
|
UCCx801 |
7 |
VCC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Leading Edge |
UCCx804 |
|
|
|
|
|
|
|
UCCx805 |
|
|
|
VCC |
|
|
|
|
Blanking |
|
|
|
|
1.5 V |
|
|
Only |
|
|
||
|
REF/2 |
|
|
|
|
|||
OK |
|
Overcurrent |
|
|
T Q |
|
|
|
|
|
S Q |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
|
Oscillator S Q |
6 |
OUT |
|
|
4 V |
S Q |
|
|
||||
|
|
|
|
|
|
|
||
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
|
|
PWM |
|
|
REF |
0.5 V |
|
|
|
Latch |
13.5 V |
|
|
|
|
|
|
|
||||
OK |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
Full Cycle |
|
|
|
|
|
|
Logic |
Soft Start |
Power |
|
= 4 ms |
1 V |
|
5 GND
8
REF
AVAILABLE OPTIONS{
SOIC-8
TA SMALL OUTLINE}
(D)
UCC2800QDRQ1§
UCC2801QDRQ1§
UCC2802QDRQ1§
−40 _C to 125_C
UCC2803QDRQ1§
UCC2804QDRQ1§
UCC2805QDRQ1§
{For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see
the TI web site at http://www.ti.com.
‡Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging.
§The UCC280x−Q1 is only available taped and reeled in quantities of 2500 devices per reel.
4
RC
D PACKAGE (TOP VIEW)
COMP |
|
|
1 |
8 |
|
REF |
|
|
|||||
FB |
|
|
2 |
7 |
|
VCC |
CS |
|
|
3 |
6 |
|
OUT |
RC |
|
|
4 |
5 |
|
GND |
|
|
|
|
|
|
|
2 |
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 |
|
|
|
|
|
|
|
|
|
UCC2800/2801/2802/2803/2804/2805 Q1 |
|
|
|
|
|
|
|
|
|
|
LOW POWER BICMOS CURRENT MODE PWM |
|
|
|
|
|
|
|
|
|
|
SGLS121C − JULY 2002 − REVISED APRIL 2008 |
|
|
|
|
|
|
|
|
|
|
|
|
Ordering Information |
|
|
|
|
|
|
|
|||
UCC280 0 Q D |
R Q1 |
|||||||||
|
|
|
|
|
|
|
|
|
Q100 INDICATOR |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
TAPE and REEL INDICATOR |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
PACKAGE |
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
D = Plastic SOIC |
|
|
|
|
|
|
|
|
|
|
AUTOMOTIVE TEMPERATURE RANGE INDICATOR |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
PRODUCT OPTION |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
0 through 5 |
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†‡
V |
CC |
voltage w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . . . 12 V |
|
V |
current w |
30 mA |
||
CC |
||||
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . . ±1 A |
|||
Output energy, (Capacitive Load) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . 20 J |
|||
Analog Inputs (FB, CS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
−0.3 V to 6.3 V |
|||
Power Dissipation at TA < +25_C (D package) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . 0.65 W |
|||
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
−65 _C to 150_C |
|||
Lead temperature soldering 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . |
. . . . . . . 300_C |
†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
‡ Unless otherwise indicated, voltages are reference to ground and currents are positive into and negative out of the specified terminals.
wIn normal operation VCC is powered through a current limiting resistor. Absolute maximum of 12 V applies when VCC is driven from a low impedance source such that ICC does not exceed 30 mA (which includes gate drive current requirement).
electrical characteristics TA = −40 _C to 125_C, VCC = 10 V (see Note 1), RT = 100 kΩ from REF to
RC, CT = 330 pF from RC to GND, 0.1-F capacitor from VCC to GND, 0.1-F capacitor from VREF to GND and TA = TJ (unless otherwise stated)
|
PARAMETER |
TEST CONDITIONS |
MIN |
TYP |
MAX |
UNITS |
|
||
|
|
|
|
|
|
|
|
|
|
Reference Section |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
Output voltage |
TJ = 25_C, I = 0.2 mA |
UCC2800/01/02/04 |
4.925 |
5 |
5.075 |
V |
|
||
|
|
|
|
|
|||||
UCC2803/05 |
3.94 |
4 |
4.06 |
||||||
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
Load regulation voltage |
I = 0.2 mA to 5 mA |
|
|
10 |
30 |
mV |
|
||
|
|
|
|
|
|
|
|
|
|
Line regulation voltage |
VCC = 10 V to 12 V |
TJ = 25_C |
|
|
1.9 |
mV/V |
|
||
TJ = −40 _C to 125_C |
|
|
2.5 |
|
|||||
|
|
|
|
|
|
|
|||
Total variation voltage |
See Note 5 |
UCC2800/01/02/04 |
4.88 |
5 |
5.1 |
V |
|
||
|
|
|
|
|
|||||
UCC2803/05 |
3.9 |
4 |
4.08 |
||||||
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
Output noise voltage |
f = 10 Hz to 10 kHz, |
TJ = 25_C |
|
130 |
|
V |
|
||
See Note 7 |
|
|
|
||||||
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
Long term stability |
1000 hours, |
TA = 125_C |
|
5 |
|
mV |
|
||
See Note 7 |
|
|
|
||||||
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
Output short-circuit current |
|
|
−5 |
|
−35 |
mA |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 |
3 |
UCC2800/2801/2802/2803/2804/2805 Q1 |
|
LOW POWER BICMOS CURRENT MODE PWM |
|
SGLS121C − JULY 2002 − REVISED APRIL 2008
electrical characteristics TA = −40 _C to 125_C, VCC = 10 V (see Note 1), RT = 100 kΩ from REF to
RC, CT = 330 pF from RC to GND, 0.1-F capacitor from VCC to GND, 0.1-F capacitor from VREF to GND and TA = TJ (unless otherwise stated)
PARAMETER |
TEST CONDITIONS |
MIN |
TYP |
MAX |
UNITS |
|||
|
|
|
|
|
|
|
|
|
Oscillator Section |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oscillator frequency |
See Note 2 |
|
|
UCC2800/01/02/04 |
40 |
46 |
52 |
kHz |
|
|
|
|
|
|
|||
|
|
UCC2803/05 |
26 |
31 |
36 |
|||
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
Temperature stability |
See Note 7 |
|
|
|
|
2.5 |
|
% |
|
|
|
|
|
|
|
|
|
Amplitude peak-to-peak |
|
|
|
|
2.25 |
2.4 |
2.55 |
V |
|
|
|
|
|
|
|
|
|
Oscillator peak voltage |
|
|
|
|
|
2.45 |
|
V |
|
|
|
|
|
|
|
|
|
Error Amplifier Section |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Input voltage |
COMP = 2.5 V |
|
|
UCC2800/01/02/04 |
2.44 |
2.5 |
2.56 |
V |
|
|
|
|
|
|
|
||
COMP = 2.0 V |
|
|
UCC2803/05 |
1.95 |
2 |
2.05 |
||
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
Input bias current |
|
|
|
|
−1 |
|
1 |
A |
|
|
|
|
|
|
|
|
|
Open loop voltage gain |
|
|
|
|
60 |
80 |
|
db |
|
|
|
|
|
|
|
||
COMP sink current |
FB = 2.7 V, |
COMP = 1.1 V |
0.3 |
|
3.5 |
mA |
||
|
|
|
|
|
|
|
||
COMP source current |
FB = 1.8 V, |
COMP = REF − 1.2 V |
−0.2 |
−0.5 |
−0.8 |
mA |
||
|
|
|
|
|
|
|
|
|
Gain bandwidth product |
See Note 7 |
|
|
|
|
2 |
|
MHz |
|
|
|
|
|
|
|
|
|
PWM Section |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum duty cycle |
|
|
|
UCC2800/02/03 |
97 |
99 |
100 |
% |
|
|
|
|
|
|
|
||
|
|
|
UCC2801/04/05 |
48 |
49 |
50 |
||
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
Minimum duty cycle |
COMP = 0 V |
|
|
|
|
|
0 |
% |
|
|
|
|
|
|
|
|
|
Current Sense Section |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gain |
See Note 3 |
|
|
|
1.1 |
1.65 |
1.8 |
V/V |
|
|
|
|
|
|
|
|
|
Maximum input signal |
COMP = 5 V, |
See Note 4 |
|
0.9 |
1 |
1.1 |
V |
|
|
|
|
|
|
|
|
|
|
Input bias current |
|
|
|
|
−200 |
|
200 |
nA |
|
|
|
|
|
|
|
|
|
CS blank time |
|
|
|
|
50 |
100 |
150 |
ns |
|
|
|
|
|
|
|
|
|
Over-current threshold voltage |
|
|
|
|
1.42 |
1.55 |
1.68 |
V |
|
|
|
|
|
|
|
|
|
COMP to CS offset voltage |
CS = 0 V |
|
|
|
0.45 |
0.9 |
1.35 |
V |
|
|
|
|
|
|
|
|
|
Output Section (OUT) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IOUT = 20 mA |
|
|
All parts |
|
0.1 |
0.4 |
|
Low-level output voltage |
IOUT = 200 mA |
|
|
All parts |
|
0.35 |
0.9 |
V |
IOUT = 50 mA, |
VCC = 5 V |
|
UCC2803/05 |
|
0.15 |
0.4 |
||
|
|
|
|
|||||
|
IOUT = 20 mA, |
VCC = 0 V |
|
All parts |
|
0.7 |
1.2 |
|
|
IOUT = −20 mA |
|
|
All parts |
|
0.15 |
0.4 |
|
High-level output voltage VSAT (VCC - OUT) |
IOUT = −200 mA |
|
|
All parts |
|
1 |
1.9 |
V |
|
IOUT = −50 mA, |
V CC = 5 V |
|
UCC2803/05 |
|
0.4 |
0.9 |
|
Rise time |
CL = 1 nF |
|
|
|
|
41 |
70 |
ns |
Fall time |
CL = 1 nF |
|
|
|
|
44 |
75 |
ns |
4 |
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 |