Quick Start
Cable Modem
Plus N450 Router
MG7315
Packaged with your MG7315 modem/router
Power Cube |
Coax Wrench |
Ethernet Cable |
Velcro® Cable Organizer |
Para una Guía de Inicio Rápido en español, por favor vaya a www.motorolacable.com/MG7315IR
Let’s get started
If you don’t have cable Internet service, please order that from your cable service provider.
Now connect your MG7315 as shown on the next panel.
Connecting to a Coax Cable
Soon you’ll need to connect your MG7315 to a “live” coax cable. Sometimes a cable will already be available. Sometimes there’s a coax wall jack available, and you connect to the jack with a coax cable. Your MG7315 can also share a coax cable attached to a TV by using a coax splitter.
ON/OFF button
POWER
Connect the supplied power cube between the power jack and an electrical outlet.
RESET
WLAN button
Wi-Fi on/off button
WPS button
ETHERNET (LAN 1-4)
You can connect a computer, HDTV, game station, or other Ethernet-capable device to any of these 4 LAN ports.
COAX
Connect a “live” coax cable to the modem’s COAX connector as discussed above. (Tighten the nut so it’s finger tight. You may want to use the supplied wrench. Make the connection snug but not over-tight.)
Prepare to activate
By now you should have:
•Subscribed to cable Internet service.
•Connected your MG7315.
•Powered up your MG7315. To do this, the On/Off button needs to be On. Wait for the green online connection light 
to stop flashing and remain solidly lit. This may take up to 15 minutes.
You should have a recent cable bill handy because it has your account number and you’ll probably need that.
If you’re asked for information about the MG7315, you can find this on the label on the bottom of the MG7315.
Activate
For some service providers, you activate by calling them. Many service providers including Comcast and Cox prefer that you activate by opening the Web browser of a computer that’s plugged into one of the MG7315’s Ethernet ports.
If you don’t have a computer, you can use the Web browser of a Wi-Fi device such as a smartphone or tablet. In that case you’ll need the unique Wireless Network Name and Password printed on the bottom of your MG7315. You’ll use these in setting up your wireless device to connect to the MG7315. Once you’ve connected, you can open the browser of that wireless device.
Loading...