MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
4:1 Differential Multiplexer
The MC10/100EL57 is a fully differential 4:1 multiplexer. By leaving the SEL1 line open (pulled LOW via the input pulldown resistors) the device can also be used as a differential 2:1 multiplexer with SEL0 input selecting between D0 and D1. The fully differential architecture of the EL57 makes it ideal for use in low skew applications such as clock distribution.
The SEL1 is the most significant select line. The binary number applied to the select inputs will select the same numbered data input (i.e., 00 selects D0).
Multiple VBB outputs are provided for single-ended or AC coupled interfaces. In these scenarios, the VBB output should be connected to the data bar inputs and bypassed via a 0.01μF capacitor to ground. Note that the VBB output can source/sink up to 0.5mA of current without upsetting the voltage level.
•Useful as Either 4:1 or 2:1 Multiplexer
•VBB Output for Single-Ended Operation
•75kΩ Internal Input Pulldown Resistors
•>1000V ESD Protection
LOGIC DIAGRAM AND PINOUT ASSIGNMENT
VCC |
SEL0 |
SEL1 |
Q |
Q |
VBB1 VBB2 VEE |
||
16 |
15 |
14 |
13 |
12 |
11 |
10 |
9 |
|
|
|
|
4:1 |
|
|
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
D0 |
D0 |
D1 |
D1 |
D2 |
D2 |
D3 |
D3 |
MC10EL57
MC100EL57
16
1
D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751B-05
PIN DESCRIPTION
PIN |
FUNCTION |
|
|
D0±3 |
Diff Data Inputs |
SEL0,1 |
Mux Select Inputs |
VBB |
Reference Output |
Q0 |
Data Outputs |
|
|
FUNCTION TABLE
SEL1 |
SEL0 |
DATA OUT |
|
|
|
L |
L |
D0 |
L |
H |
D1 |
H |
L |
D2 |
H |
H |
D3 |
ABSOLUTE MAXIMUM RATINGS1
Symbol |
|
Characteristic |
Rating |
Unit |
|
|
|
|
|
VEE |
Power Supply (VCC = 0V) |
±8.0 to 0 |
VDC |
|
VI |
Input Voltage (VCC = 0V) |
0 to ±6.0 |
VDC |
|
Iout |
Output Current |
Continuous |
50 |
mA |
|
|
Surge |
100 |
|
|
|
|
|
|
TA |
Operating Temperature Range |
±40 to +85 |
°C |
|
VEE |
Operating Range1,2 |
|
±5.7 to ±4.2 |
V |
1. |
Absolute maximum rating, beyond which, device life may be impaired, unless otherwise specified on an individual data sheet. |
|||
2. |
Parametric values specified at: |
10EL Series: |
±4.94V to ±5.50V |
|
|
|
100EL Series: |
±4.20V to ±5.50V |
|
1/95 |
|
|
|
|
Motorola, Inc. 1996 |
|
REV 1 |