September 1998
54ACTQ08
Quiet Series Quad 2-Input AND Gate
General Description
The 'ACTQ08 contains four, 2-input AND gates and utilizes NSC Quiet Series technology to guarantee quiet output switching and improved dynamic threshold performance. FACT Quiet Series™ features GTO™ output control and undershoot corrector in addition to a split ground bus for superior ACMOS performance.
nGuaranteed simultaneous switching noise level and dynamic threshold performance
nImproved latch-up immunity
nMinimum 4 kV ESD protection
nOutputs source/sink 24 mA
n'ACTQ08 has TTL-compatible inputs
nStandard Microcircuit Drawing (SMD) 5962-8954701
Features
n ICC reduced by 50%
Logic Symbol |
Connection Diagrams |
IEEE/IEC |
Pin Assignment |
|
for DIP and Flatpak |
DS010891-1 DS010891-2
Pin Names |
Description |
Pin Assignment |
|
|
|
An, Bn |
Inputs |
for LCC |
On |
Outputs |
|
DS010891-3
GTO™ is a trademark of National Semiconductor Corporation.
FACT™ and FACT Quiet Series™ are trademarks of Fairchild Semiconductor Corporation.
Gate AND Input-2 Quad Series Quiet 54ACTQ08
© 1998 National Semiconductor Corporation |
DS010891 |
www.national.com |
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications.
Supply Voltage (VCC) |
−0.5V to +7.0V |
DC Input Diode Current (IIK) |
|
VI = −0.5V |
−20 mA |
VI = VCC + 0.5V |
+20 mA |
DC Input Voltage (VI) |
−0.5V to V CC + 0.5V |
DC Output Diode Current (IOK) |
|
VO = −0.5V |
−20 mA |
VO = VCC + 0.5V |
+20 mA |
DC Output Voltage (VO) |
−0.5V to V CC + 0.5V |
DC Output Source |
|
or Sink Current (IO) |
±50 mA |
DC VCC or Ground Current |
|
per Output Pin (ICC or IGND) |
±50 mA |
Storage Temperature (TSTG) |
−65ÊC to +150ÊC |
DC Latch-Up |
|
Source or Sink Current |
±300 mA |
Junction Temperature (TJ) |
|
CDIP |
175ÊC |
Recommended Operating
Conditions (Note 2)
Supply Voltage (VCC) |
|
'ACTQ |
4.5V to 5.5V |
Input Voltage (VI) |
0V to VCC |
Output Voltage (VO) |
0V to VCC |
Operating Temperature (TA) |
|
54ACTQ |
−55ÊC to +125ÊC |
Minimum Input Edge Rate (dV/dt) |
|
'ACTQ Devices |
125 mV/ns |
VIN from 0.8V to 2.0V |
|
VCC @ 4.5V, 5.5V |
|
Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation outside of databook specifications.
Note 2: All commercial packaging is not recommended for applications requiring greater than 2000 temperature cycles from −40ÊC to +125ÊC.
DC Characteristics for 'ACTQ Family Devices
|
|
|
54ACTQ |
|
|
|
|
|
|
|
|
Symbol |
Parameter |
VCC |
TA = |
Units |
Conditions |
|
|
(V) |
−55ÊC to +125ÊC |
|
|
|
|
|
|
|
|
|
|
|
Guaranteed Limits |
|
|
|
|
|
|
|
|
VIH |
Minimum High Level |
4.5 |
2.0 |
V |
VOUT = 0.1V |
|
Input Voltage |
5.5 |
2.0 |
|
or VCC − 0.1V |
VIL |
Maximum Low Level |
4.5 |
0.8 |
V |
VOUT = 0.1V |
|
Input Voltage |
5.5 |
0.8 |
|
or VCC − 0.1V |
VOH |
Minimum High Level |
4.5 |
4.4 |
V |
IOUT = −50 µA |
|
Output Voltage |
5.5 |
5.4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
(Note 3) |
|
|
|
|
|
VIN = VILor VIH |
|
|
4.5 |
3.70 |
V |
IOH = −24 mA |
|
|
5.5 |
4.70 |
|
IOH = −24 mA |
VOL |
Maximum Low Level |
4.5 |
0.1 |
V |
IOUT = 50 µA |
|
Output Voltage |
5.5 |
0.1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
(Note 3) |
|
|
|
|
|
VIN = VILor VIH |
|
|
4.5 |
0.50 |
V |
IOL = 24 mA |
|
|
5.5 |
0.50 |
|
IOL = 24 mA |
IIN |
Maximum Input |
5.5 |
±1.0 |
µA |
VI = VCC, GND |
|
Leakage Current |
|
|
|
|
|
|
|
|
|
|
ICCT |
Maximum |
5.5 |
1.6 |
mA |
VI = VCC − 2.1V |
|
ICC/Input |
|
|
|
|
IOLD |
Minimum Dynamic |
5.5 |
50 |
mA |
VOLD = 1.65V Max |
IOHD |
Output Current (Note 4) |
5.5 |
−50 |
mA |
V OHD = 3.85V Min |
ICC |
Maximum Quiescent |
5.5 |
40.0 |
µA |
VIN = VCC |
|
Supply Current |
|
|
|
or GND (Note 4) |
www.national.com |
2 |