N |
August 1996 |
Not Intended For New Designs |
Comlinear CLC206
Overdrive-Protected Wideband Op Amp
General Description
The CLC206 is constructed using thin film resistor/bipolar transistor technology, and is available in the following versions:
CLC206AI |
-25°C to +85°C |
12-pin TO-8 can |
CLC206A8C -55°C to +125°C |
12-pin TO-8 can, |
|
|
|
MIL-STD-883, Level B |
CLC206AK |
-55°C to +125°C |
12-pin TO-8 can, features burn-in |
|
|
and hermetic testing |
CLC206AM |
-55°C to +125°C |
12-pin TO-8 can, screened to |
|
|
Comlinear’s M standard for high |
|
|
reliability |
Features
■-3dB bandwidth of 180MHz
■70MHz large signal bandwidth (20Vpp)
■0.1% settling in 19ns
■Overdrive protected
■Output may be current limited
■Stable without compensation
■3MΩ inout impedance
Applications
■Fast, precision A/D conversion
■Automatic test equipment
■Input/output amplifiers
■Photodiode, CCD preamps
■High-speed modems, radios
■Line drivers
Bottom View
Package Dimensions
Typical Performance
Protected-Overdrive |
CLC206 Comlinear |
Amp Op Wideband |
|
© 1996 National Semiconductor Corporation |
http://www.national.com |
Printed in the U.S.A.
CLC206 Electrical Characteristics (Av = +20,Vcc = ±15V, R L = 200Ω, Rf = 2kΩ; unless specified)
Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are determined from tested parameters.
Absolute Maximum Ratings |
Recommended Operating Conditions |
http://www.national.com |
2 |