Fairchild Semiconductor HLMP-0300, HLMP-0301, HLMP-0400, HLMP-0401, HLMP-0503 Datasheet

2.5 X 7.4 mm RECTANGULAR

SOLID STATE LAMPS

HIGH EFFICIENCY RED HLMP0300/1 YELLOW HLMP0400/1 HIGH EFFICIENCY GREEN HLMP0503/4

PACKAGE DIMENSIONS

.315 (8.00)

.290 (7.37)

	1.00 (25.4)	CATHODE
	MIN.

.050 (1.27) NOMINAL

ANODE

.295 (7.49)

.275 (6.99)

.100 (2.54)

NOMINAL .018 (.45) SQ NOMINAL 2 PLS

.100 (2.54)

.090 (2.29)

NOTES:

1.ALL DIMENSIONS ARE IN INCHES (mm).

2.TOLERANCES ARE ± 0.010” INCH UNLESS SPECIFIED.

3.AN EPOXY MENISCUS MAY EXTEND ABOUT 0.040” (1mm) DOWN THE LEADS.

FEATURES

•Wide viewing angle

•Solid state reliability

•Perfect for panel indicators

DESCRIPTION

The HLMP-0X0X series of rectangular lamps are direct replacements for Agilent’s series with the same part numbers. The series is similar to MV5X123 except for the larger lens size. Like the MV5X123, the HLMP-0X0X is stackable. The lamps are tinted and diffused.

ABSOLUTE MAXIMUM RATING (TA =25°C)

Parameter	HER	YELLOW	HEG	UNITS
Power Dissipation (HLMP-040X=85mA)	135	135	135	mW
Peak Forward Current (1 sec pluse, 0.3% DC)	90	90	60	mA
Continuous DC Forward Current	30	20	30	mA
Lead Soldering Time at 260° C	5	5	5	sec
Operating Temperature	-55 to +100	-55 to +100	-50 to +100	°C
Storage Temperature	-55 to +100	-55 to +100	-50 to +100	°C

2001 Fairchild Semiconductor Corporation
DS300002	2/27/01	1 OF 4	www.fairchildsemi.com

2.5 X 7.4 mm RECTANGULAR

SOLID STATE LAMPS

ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C)

	Parameter	HER		YELLOW		HEG
		HLMP0300/1 HLMP0400/1				HLMP0503/4		Condition
	Luminous Intensity (mcd)							IF = 20mA
	Minimum	1.0	2.5	1.5	3.0	1.5	2.5
	Typical	2.5	5.0	2.5	5.0	3.0	5.0
	Forward Voltage (V)							IF = 20mA
	Maximum	3.0	3.0	3.0	3.0	3.0	3.0
	Typical	2.1	2.1	2.2	2.2	2.3	2.3
	Peak Wavelength (nm)	635	635	585	585	565	565	IF = 20mA
	Spectral Line Half Width (nm)	45	45	35	35	35	35	IF = 20mA
	Reverse Voltage (V)	5	5	5	5	5	5	IR = 100 A
	Viewing Angle (°)	100	100	100	100	100	100

www.fairchildsemi.com

2 OF 4

2/27/01 DS300002