HLMP-D600
T-1 3/4 (5mm)
SOLID STATE LAMPS
.040 (1.02)
.200 (5.08)
.180 (4.57)
.050 (1.27)
REF.
.100 (2.54)
.350 (8.89)
.330 (8.38)
1.00 (25.4)
MIN.
.100 (2.54)
REF.
Ø .230 (5.84)
.023 (0.58)
.017 (0.43)
SQ. TYP. (2X)
.050 (1.27)
FLAT DENOTES
CATHODE
PACKAGE DIMENSIONS
PURE GREEN HLMP-D600 TINTED
PURE GREEN HLMP-D640 CLEAR
SOFT ORANGE HLMP-D400 TINTED
SOFT ORANGE HLMP-D401 TINTED
DESCRIPTION
These T-1 3/4 LEDs are widely used as general purpose indica-
tors. The pure green lamps is made with a GaP LED on a GaP
substrate. The soft orange is made with a GaAsP LED on a GaP
substrate. They are encapsulated in epoxy packages and are
designed to provide superior light output and a wide viewing
angle.
FEATURES
• Popular T-1 3/4 package
• Low drive current
• Solid state reliability
• Wide viewing angle
• Choice of pure green or soft orange colors
Parameter GREEN ORANGE UNITS
Power Dissipation 110 110 mW
Forward Current 40 40 mA
Peak Forward Current (f=1kHz, DF=10%) 200 200 mA
Lead Soldering Time at 260° C 5 5 sec
Operating Temperature -40 to +100 -40 to +100 °C
Storage Temperature -40 to +100 -40 to +100 °C
ABSOLUTE MAXIMUM RATING
(TA =25°C)
NOTES:
1. ALL DIMENSIONS ARE IN INCHES (mm).
2. TOLERANCES ARE ±.010” INCH UNLESS SPECIFIED.
3. AN EPOXY MENISCUS MAY EXTEND ABOUT .040”
(1 mm) DOWN THE LEADS.
2001 Fairchild Semiconductor Corporation
DS300013 2/27/01 1 OF 4 www.fairchildsemi.com
Part Number HLMP-D600 HLMP-D640* HLMP-D400 HLMP-D401 Condition
Luminous Intensity (mcd) I
F
= 10mA
Minimum 1.0 6.7 2.1 4.0
Typical 3.0 6.0 3.5 7.0
Forward Voltage (V) I
F
= 10mA
Maximum 2.7 3.0 2.4 2.4
Typical 2.1 2.2 1.9 1.9
Peak Wavelength (nm) 555 555 612 612 I
F
= 10mA
Spectral Line Half Width (nm) 24 24 40 40 I
F
= 10mA
Reverse Voltage (V) 5 5 5 5 I
R
= 100µA
Viewing Angle (°) 60 24 60 60 I
F
= 10mA
ELECTRICAL / OPTICAL CHARACTERISTICS
(TA =25°C)
* HLMP-D640 test condition is I
F
= 20mA
T-1 3/4 (5mm)
SOLID STATE LAMPS
www.fairchildsemi.com 2 OF 4 2/27/01 DS300013
Loading...