Fairchild Semiconductor 74AC04SJ, 74AC04SCX, 74AC04SC, 74AC04PC, 74AC04MTCX Datasheet

November 1988

Revised November 1999

74AC04 • 74ACT04 Hex Inverter

General Description		Features
The AC/ACT04 contains six inverters.		■ ICC reduced by 50% on 74AC only
		■ Outputs source/sink 24 mA
		■ ACT04 has TTL-compatible inputs
Ordering Code:
Order Number	Package Number	Package Description
74AC04SC	M14A	14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow Body
74AC04SJ	M14D	14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74AC04MTC	MTC14	14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
74AC04PC	N14A	14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
74ACT04SC	M14A	14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow Body
74ACT04MTC	MTC14	14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
74ACT04PC	N14A	14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide

Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. (PC not available in Tapeand Reel.)

Logic Symbol	Connection Diagram
	IEEE/IEC

Pin Descriptions

Pin Names			Description
	An		Inputs
	O	n	Outputs

FACT is a trademark of Fairchild Semiconductor Corporation.

Inverter Hex 74ACT04 • 74AC04

© 1999 Fairchild Semiconductor Corporation

DS009913

www.fairchildsemi.com

74AC04 • 74ACT04

Absolute Maximum Ratings(Note 1)

Supply Voltage (VCC)		− 0.5V to + 7.0V
DC Input Diode Current (IIK)
VI =	− 0.5V	− 20 mA
VI =	VCC + 0.5V	+ 20 mA
DC Input Voltage (VI)		− 0.5V to VCC + 0.5V
DC Output Diode Current (IOK)
VO =	− 0.5V	− 20 mA
VO =	VCC + 0.5V	+ 20 mA
DC Output Voltage (VO)		− 0.5V to VCC + 0.5V
DC Output Source or Sink Current (IO)		± 50 mA
DC VCC or Ground Current
per Output Pin (ICC or IGND)		± 50 mA
Storage Temperature (TSTG)		− 65° C to + 150° C
Junction Temperature (TJ)
PDIP		140° C

Recommended Operating

Conditions

Supply Voltage (VCC)
AC	2.0V to 6.0V
ACT	4.5V to 5.5V
Input Voltage (VI)	0V to VCC
Output Voltage (VO)	0V to VCC
Operating Temperature (TA)	− 40° C to + 85° C
Minimum Input Edge Rate (∆ V/∆ t)
AC Devices
VIN from 30% to 70% of VCC
VCC @ 3.3V, 4.5V, 5.5V	125 mV/ns
Minimum Input Edge Rate (∆ V/∆ t)
ACT Devices
VIN from 0.8V to 2.0V
VCC @ 4.5V, 5.5V	125 mV/ns

Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of FACT circuits outside databook specifications.

DC Electrical Characteristics for AC

Symbol	Parameter	VCC	TA = + 25° C			TA = − 40° C to + 85° C	Units			Conditions
		(V)	Typ		Guaranteed Limits
VIH	Minimum HIGH Level	3.0	1.5	2.1		2.1		VOUT =		0.1V
	Input Voltage	4.5	2.25	3.15		3.15	V	or VCC −			0.1V
		5.5	2.75	3.85		3.85
VIL	Maximum LOW Level	3.0	1.5	0.9		0.9		VOUT =		0.1V
	Input Voltage	4.5	2.25	1.35		1.35	V	or VCC −			0.1V
		5.5	2.75	1.65		1.65
VOH	Minimum HIGH Level	3.0	2.99	2.9		2.9
	Output Voltage	4.5	4.49	4.4		4.4	V	IOUT =		−	50 µ A
		5.5	5.49	5.4		5.4
								VIN =	VIL or VIH
		3.0		2.56		2.46		IOH =	−	12 mA
		4.5		3.86		3.76	V	IOH =	−	24 mA
		5.5		4.86		4.76		IOH =	− 24 mA (Note 2)
VOL	Maximum LOW Level	3.0	0.002	0.1		0.1
	Output Voltage	4.5	0.001	0.1		0.1	V	IOUT =		50 µ A
		5.5	0.001	0.1		0.1
								VIN =	VIL or VIH
		3.0		0.36		0.44		IOL=	12 mA
		4.5		0.36		0.44	V	IOL =	24 mA
		5.5		0.36		0.44		IOL =	24 mA (Note 2)
IIN	Maximum Input	5.5		± 0.1		± 1.0	µ A	VI =	VCC, GND
(Note 4)	Leakage Current
IOLD	Minimum Dynamic Output Current	5.5				75	mA	VOLD =		1.65V Max
IOHD	(Note 3)	5.5				− 75	mA	VOHD =			3.85V Min
ICC	Maximum Quiescent	5.5		2.0		20.0	µ A	VIN =	VCC
(Note 4)	Supply Current							or GND

Note 2: All outputs loaded; thresholds on input associated with output under test.

Note 3: Maximum test duration 2.0 ms, one output loaded at a time.

Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC.

www.fairchildsemi.com

2

DC Electrical Characteristics for ACT

Symbol	Parameter	VCC	TA = + 25° C			TA = − 40° C to + 85° C	Units			Conditions
		(V)	Typ		Guaranteed Limits
VIH	Minimum HIGH Level	4.5	1.5	2.0		2.0	V	VOUT =		0.1V
	Input Voltage	5.5	1.5	2.0		2.0		or VCC −			0.1V
VIL	Maximum LOW Level	4.5	1.5	0.8		0.8	V	VOUT =		0.1V
	Input Voltage	5.5	1.5	0.8		0.8		or VCC −			0.1V
VOH	Minimum HIGH Level	4.5	4.49	4.4		4.4	V	IOUT =		−	50 µ A
	Output Voltage	5.5	5.49	5.4		5.4
								VIN =	VIL or VIH
		4.5		3.86		3.76	V	IOH =	−	24 mA
		5.5		4.86		4.76		IOH =	−	24 mA (Note 5)
VOL	Maximum LOW Level	4.5	0.001	0.1		0.1	V	IOUT =		50 µ A
	Output Voltage	5.5	0.001	0.1		0.1
								VIN =	VIL or VIH
		4.5		0.36		0.44	V	IOL0 =		24 mA
		5.5		0.36		0.44		IOL =	24 mA (Note 5)
IIN	Maximum Input	5.5		± 0.1		± 1.0	µ A	VI =	VCC, GND
	Leakage Current
ICCT	Maximum	5.5	0.6			1.5	mA	VI =	VCC − 2.1V
	ICC/Input
IOLD	Minimum Dynamic Output Current	5.5				75	mA	VOLD =		1.65V Max
IOHD	(Note 6)	5.5				− 75	mA	VOHD =			3.85V Min
ICC	Maximum Quiescent	5.5		4.0		40.0	µ A	VIN =	VCC
	Supply Current							or GND

Note 5: All outputs loaded; thresholds on input associated with output under test.

Note 6: Maximum test duration 2.0 ms, one output loaded at a time.

74ACT04 • 74AC04

3	www.fairchildsemi.com