Texas Instruments THS4012IDR, THS4011IDR, THS4011MFKB, THS4011IDGNR, THS4011IDGN Datasheet

THS4011, THS4012

290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS

SLOS216B ± JUNE 1999 ± FEBRUARY 2000

DVery High Speed

±290 MHz Bandwidth (G = 1, ±3 dB)

±310 V/µs Slew Rate

±37 ns Settling Time (0.1%)

DVery Low Distortion

±THD = ±80 dBc (f = 1 MHz, RL = 150 Ω)

D110 mA Output Current Drive (Typical)

D7.5 nV/√ Hz Voltage Noise

DExcellent Video Performance

±70 MHz Bandwidth (0.1 dB, G = 1)

±0.006% Differential Gain Error

±0.01° Differential Phase Error

D±5 V to ±15 V Supply Voltage

DAvailable in Standard SOIC, MSOP PowerPAD, JG, or FK Packages

DEvaluation Module Available

		THS4011						THS4012
JG, D AND DGN PACKAGE						D AND DGN² PACKAGE
		(TOP VIEW)						(TOP VIEW)
NULL					NULL	1OUT													VCC+
		1	8					1				8
IN ±		2	7		VCC+	1IN ±		2									7		2OUT
IN +		3	6		OUT	1IN +		3									6		2IN±
VCC±		4	5		NC	±VCC		4									5		2IN+

NC ± No internal connection

Cross Section View Showing

PowerPAD Option (DGN)

²This device is in the Product Preview stage of development. Please contact your local TI sales office for availability.

THS4011

FK PACKAGE (TOP VIEW)

description

The THS4011 and THS4012 are very high speed, single/dual, voltage feedback amplifiers ideal for a wide range of applications. The devices offer very good ac performance with 290-MHz bandwidth, 310-V/µs slew rate, and 37-ns settling time (0.1%). These amplifiers have a high output drive capability of 110 mA and draw only 7.8-mA supply current per channel. For applications requiring low distortion, the THS4011/12 operate with a total harmonic distortion (THD) of ±80 dBc at f = 1 MHz. For video applications, the THS4011/12 offer 0.1 dB gain flatness to 70-MHz, 0.006% differential gain error, and 0.01° differential phase error.

	NC	NULL	NC	NULL	NC
	3	2	1	20	19
NC	4				18	NC
IN±	5				17	VCC+
NC	6				16	NC
IN+	7				15	OUT
NC	8				14	NC
	9	10	11	12	13
	NC	CC±	NC	NC	NC
		V

	RELATED DEVICES
DEVICE	DESCRIPTION
THS4011/2	290-MHz Low Distortion High-Speed Amplifiers
THS4031/2	100-MHz Low Noise High Speed-Amplifiers
THS4061/2	180-MHz High-Speed Amplifiers

CAUTION: THE THS4011 AND THS4012 provide ESD protection circuitry. However, permanent damage can still occur if this device is subjected to high-energy electrostatic discharges. Proper ESD precautions are recommended to avoid any performance degradation or loss of functionality.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Copyright 2000, Texas Instruments Incorporated

On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

1

THS4011, THS4012

290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS

SLOS216B ± JUNE 1999 ± FEBRUARY 2000

			DISTORTION
			vs
			FREQUENCY
	±40
		VCC = ± 15 V
	±50	RL = 150 Ω
		G = 2
dB	±60
±			2nd Harmonic
Distortion
	±70
	±80
	±90
	±100		3rd Harmonic
	±110
	100k		1M	10M
			f ± Frequency ± Hz

AVAILABLE OPTIONS

				PACKAGED DEVICES
	TA	NUMBER OF	PLASTIC	PLASTIC	CERAMIC	CHIP	MSOP	EVALUATION
			SMALL
		CHANNELS		MSOP²	DIP	CARRIER	SYMBOL	MODULE
			OUTLINE²
				(DGN)	(JG)	(FK)
			(D)
	0°C to	1	THS4011CD	THS4011CDGN	Ð	Ð	TIACM	THS4011EVM
	70°C	2	THS4012CD	THS4012CDGN³	Ð	Ð	TIABD	THS4012EVM
	±40°C to	1	THS4011ID	THS4011IDGN	Ð	Ð	TIACN	Ð
	85°C	2	THS4012ID	THS4012IDGN³	Ð	Ð	TIABZ	Ð
	±55°C to	1	Ð	Ð	THS4011MJG	THS4011MFK	Ð	Ð
	125°C

² The D and DGN packages are available taped and reeled. Add an R suffix to the device type (i.e., THS4011CDGNR). ³ This device is in the Product Preview stage of development. Please contact your local TI sales office for availability.

2	POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

THS4011, THS4012

290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS

SLOS216B ± JUNE 1999 ± FEBRUARY 2000

functional block diagram

				Null
		2		1
IN±			±			8
		3				6		OUT
IN+			+
Figure 1. THS4011 ± Single Channel
				VCC
1IN±	2		±		8
				1				1OUT
1IN+	3		+
	6
2IN±			±
				7				2OUT
2IN+	5		+
					4

±VCC

Figure 2. THS4012 ± Dual Channel

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

3

THS4011, THS4012

290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS

SLOS216B ± JUNE 1999 ± FEBRUARY 2000

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)²

Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	. . . . . . ±16.5 V
Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	. . . . . . . . ±VCC
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	. . . . . . 175 mA
Differential input voltage, VID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	. . . . . . . . . ±4 V
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	See Dissipation Rating Table
Maximum junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	. . . . . . . 150°C
Operating free-air temperature, TA, THS401xC . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	. . 0°C to 70°C
THS401xI . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	±40°C to 85°C
THS4011M . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . .	±55°C to 125°C
Storage temperature, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . .	±65°C to 150°C
Lead temperature, 1,6 mm (1/16 inch) from case for 10 seconds, D, DGN package . . . . . . . .		. . . . . . . 300°C
Lead temperature, 1,6 mm (1/16 inch) from case for 60 seconds, JG package	. . . . . . . . . . . .	. . . . . . . 300°C
Case temperature for 60 seconds, FK package . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . .	. . . . . . . 260°C

²Stresses beyond those listed under ªabsolute maximum ratingsº may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under ªrecommended operating conditionsº is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

		DISSIPATION RATING TABLE
	PACKAGE	θJA	θJC	TA = 25°C
		(°C/W)	(°C/W)	POWER RATING
	D	167²	38.3	740 mW
	DGN³	58.4	4.7	2.14 W
	JG	119	28	1050 mW
	FK	87.7	20	1375 mW
	² This data was taken using the JEDEC standard Low-K test PCB. For the JEDEC Proposed
	High-K test PCB, the θJA is 95°C/W with a power rating at TA = 25°C of 1.32 W.
	³ This data was taken using 2 oz. trace and copper pad that is soldered directly to a 3 in. × 3 in.
	PC. For further information, refer to Application Information section of this data sheet.

recommended operating conditions

			MIN NOM	MAX	UNIT
	Supply voltage, VCC	Split supply	±4.5	±16	V
		Single supply	9	32
		C suffix	0	70
	Operating free-air temperature, TA				°C
		I suffix	±40	85
		M suffix	±55	125

4	POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

THS4011, THS4012

290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS

SLOS216B ± JUNE 1999 ± FEBRUARY 2000

electrical characteristics, VCC = ±15 V, RL = 150 Ω, TA = 25°C, (unless otherwise noted)

dynamic performance

						THS4011C/I,
	PARAMETER		TEST CONDITIONS²			THS4012C/I		UNIT
						MIN TYP	MAX
	Unity-gain bandwidth (±3 dB)	Gain = 1			VCC = ±15 V	290		MHz
					VCC = ±5 V	270
BW	Bandwidth for 0.1 dB flatness	Gain = 1			VCC = ±15 V	70		MHz
					VCC = ±5 V	35
	Full power bandwidth (see Note 2)	VCC = ±15 V,	RL = 150 Ω		VO(PP) = 20 V,	4.9		MHz
		VCC = ±5 V,	RL = 150 Ω,		VO(PP) = 5 V,	16
SR	Slew rate	Gain = ±1,	RL = 150 Ω		VCC = ±15 V	310		V/µs
					VCC = ±5 V	260
	Settling time to 0.1%	VI = ±2.5 V to 2.5 V,		Gain = ±1	VCC = ±15 V	37		ns
ts					VCC = ±5 V	35
	Settling time to 0.01%	VI = ±2.5 V to 2.5 V,		Gain = ±1	VCC = ±15 V	90		ns
					VCC = ±5 V	70

² Full range = 0°C to 70°C for the C suffix and ± 40°C to 85°C for the I suffix.

noise/distortion performance

				THS4011C/I,
	PARAMETER	TEST CONDITIONS²		THS4012C/I			UNIT
				MIN	TYP	MAX
THD	Total harmonic distortion	VCC = ±15 V,	fc = 1 MHz,		± 80		dBc
		VO(PP) = 2 V
Vn	Input voltage noise	VCC = ±5 V or ±15 V,	f = 10 kHz		7.5		nV/√
								Hz
In	Input current noise	VCC = ±5 V or ±15 V,	f = 10 kHz		1		pA/√	Hz
		Gain = 2,	VCC = ±15 V		0.01%
	Differential gain error	RL = 150 Ω,
			VCC = ±5 V		0.01%
		NTSC
		Gain = 2,	VCC = ±15 V		0.01°
	Differential phase error	RL = 150 Ω,
			VCC = ±5 V		0.001°
		NTSC

² Full range = 0°C to 70°C for the C suffix and ± 40°C to 85°C for the I suffix.

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

5

THS4011, THS4012

290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS

SLOS216B ± JUNE 1999 ± FEBRUARY 2000

electrical characteristics at TA = 25°C, VCC = ±15 V, RL = 150 Ω (unless otherwise noted) (continued)

dc performance

				THS4011C/I,
	PARAMETER	TEST CONDITIONS²		THS4012C/I			UNIT
				MIN	TYP	MAX
		VCC = ±15 V,	TA = 25°C	10	25
		VO = ±10 V,					V/mV
			TA = full range	8
	Open loop gain	RL = 1 kΩ
		VCC = ±5 V,	TA = 25°C	7	12
		VO = ±2.5 V,					V/mV
			TA = full range	5
		RL = 250 Ω
VIO	Input offset voltage	VCC = ±5 V or ±15 V	TA = 25°C		1	6	mV
			TA = full range			8
	Input offset voltage drift					15	µV/°C
IIB	Input bias current	VCC = ±5 V or ±15 V	TA = 25°C		2	6	µA
			TA = full range			8
IIO	Input offset current	VCC = ±5 V or ±15 V	TA = 25°C		25	250	nA
			TA = full range			400
	Offset current drift	VCC = ±5 V or ±15 V			0.3		nA/°C

² Full range = 0°C to 70°C for the C suffix and ± 40°C to 85°C for the I suffix.

input characteristics

						THS4011C/I,
	PARAMETER		TEST CONDITIONS²			THS4012C/I			UNIT
						MIN	TYP	MAX
VICR	Common-mode input voltage range	VCC = ±15 V				±13	±14.1		V
		VCC = ±5 V				±3.8	±4.3
		VCC = ±15 V,		TA = 25°C		82	110		dB
		VIC = ±12 V		T	= full range	77			dB
CMRR	Common-mode rejection ratio			A
		VCC = ±5 V,		TA = 25°C		90	95		dB
		VIC = ±2.5 V		T	= full range	83
				A
RI	Input resistance						2		MΩ
CI	Input capacitance						1.2		pF

² Full range = 0°C to 70°C for the C suffix and ± 40°C to 85°C for the I suffix.

output characteristics

				THS4011C/I,
	PARAMETER	TEST CONDITIONS²		THS4012C/I			UNIT
				MIN	TYP	MAX
		VCC = ±15 V	RL = 1 kΩ	±13	±13.5
VO	Output voltage swing	VCC = ±5 V		±3.4	±3.7		V
		VCC = ±15 V	RL = 250 Ω	±12	±13
		VCC = ±5 V	RL = 150 Ω	±3	±3.4
IO	Output current	RL = 20 Ω,	VCC = ±15 V	70	110		mA
			VCC = ±5 V	50	75
IOS	Short-circuit output current	VCC = ±15 V			150		mA
RO	Output resistance	Open loop			12		Ω

² Full range = 0°C to 70°C for the C suffix and ± 40°C to 85°C for the I suffix.

6	POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

THS4011, THS4012

290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS

SLOS216B ± JUNE 1999 ± FEBRUARY 2000

electrical characteristics at TA = 25°C, VCC = ±15 V, RL = 150 Ω (unless otherwise noted) (continued)

power supply

				THS4011C/I,
	PARAMETER	TEST CONDITIONS²		THS4012C/I			UNIT
				MIN	TYP	MAX
VCC	Supply voltage	Dual supply		±4.5		±16.5	V
		Single supply		9		33
		VCC = ±15 V	TA = 25°C		7.8	9.5
ICC	Supply current (each amplifier)		TA = full range			11	mA
		VCC = ±5 V	TA = 25°C		6.9	8.5
			TA = full range			10
PSRR	Power supply rejection ratio	VCC = ±5 V to ±15 V	TA = 25°C	75	83		dB
			TA = full range	68

² Full range = 0°C to 70°C for the C suffix and ± 40°C to 85°C for the I suffix.

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

7

THS4011, THS4012

290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS

SLOS216B ± JUNE 1999 ± FEBRUARY 2000

electrical characteristics, VCC = ±15 V, RL = 150 Ω, TA = 25°C, (unless otherwise noted)

dynamic performance

PARAMETER

TEST CONDITIONS²

THS4011M

UNIT

MIN

TYP

MAX

Unity-gain bandwidth

Closed loop,

RL = 1 kΩ

VCC = ±15 V

*160

200

MHz

VCC = ±15 V

70

BW

Bandwidth for 0.1 dB flatness

Gain = 1

VCC = ±5 V

35

MHz

VCC = ±2.5 V

30

Full power bandwidth (see Note 1)

VCC = ±15 V,

RL = 150 Ω,

VO(PP) = 20 V

2.5

MHz

VCC = ±5 V,

RL = 150 Ω,

VO(PP) = 20 V

8

SR

Slew rate

VCC = ±15 V,

RL = 1 kΩ

*300

400

V/µs

Settling time to 0.1%

VI = ±2.5 V to 2.5 V,

Gain = ±1

VCC = ±15 V

37

ns

ts

VCC = ±5 V

35

Settling time to 0.01%

VI = ±2.5 V to 2.5 V,

Gain = ±1

VCC = ±15 V

90

ns

VCC = ±5 V

70

² Full range = ±55°C to 125°C for the M suffix.

*This parameter is not tested.

NOTE 1: Full pwer bandwidth = slew rate/2π V(PP).

noise/distortion performance

PARAMETER

TEST CONDITIONS²

THS4011M

UNIT

MIN

TYP

MAX

THD

Total harmonic distortion

VCC = ±15 V,

fc = 1 MHz,

± 80

dBc

VO(PP) = 1 V

Vn

Input voltage noise

VCC = ±5 V or ±15 V,

f = 10 kHz

7.5

nV/√

Hz

In

Input current noise

VCC = ±5 V or ±15 V,

f = 10 kHz

1

pA/√

Hz

Gain = 2,

VCC = ±15 V

0.006

Differential gain error

RL = 150 Ω,

%

VCC = ±5 V

0.001

NTSC

Gain = 2,

VCC = ±15 V

0.01°

Differential phase error

RL = 150 Ω,

VCC = ±5 V

0.002°

NTSC

² Full range = ±55°C to 125°C for the M suffix.

8	POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

THS4011, THS4012

290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS

SLOS216B ± JUNE 1999 ± FEBRUARY 2000

electrical characteristics at TA = full range, VCC = ±15 V, RL = 1 kΩ (unless otherwise noted)

(continued) dc performance

	PARAMETER		TEST CONDITIONS²		THS4011M			UNIT
					MIN	TYP	MAX
		VCC = ±15 V,	VO = ±10 V,	TA = full range	6	14		V/mV
		RL = 1 kΩ
	Open loop gain
		VCC = ±5 V,	VO = ±2.5 V,	TA = full range	5	10		V/mV
		RL = 1 kΩ
VIO	Input offset voltage	VCC = ±5 V or ±15 V		TA = 25°C		2	6	mV
				TA = full range		2	8
	Input offset voltage drift	VCC = ±5 V or ±15 V				15		µV/°C
IIB	Input bias current	VCC = ±5 V or ±15 V		TA = 25°C		2	6	µA
				TA = full range		4	8
IIO	Input offset current	VCC = ±5 V or ±15 V				25	250	nA
	Offset current drift	VCC = ±5 V or ±15 V		TA = 25°C		0.3		nA/°C

² Full range = ±55°C to 125°C for the M suffix.

input characteristics

	PARAMETER		TEST CONDITIONS²	THS4011M			UNIT
				MIN	TYP	MAX
VICR	Common-mode input voltage range	VCC = ±15 V		±13	±14.1		V
		VCC = ±5 V		±3.8	±4.3
CMRR	Common-mode rejection ratio	VCC = ±15 V,	VIC = ±12 V	75	90		dB
		VCC = ±5 V,	VIC = ±2.5 V	84	95
RI	Input resistance				2		MΩ
CI	Input capacitance				1.2		pF

² Full range = ±55°C to 125°C for the M suffix.

output characteristics

	PARAMETER	TEST CONDITIONS²			THS4011M		UNIT
				MIN	TYP	MAX
		VCC = ±15 V	RL = 1 kΩ	±13	±13.5
VO	Output voltage swing	VCC = ±5 V		±3.4	±3.7		V
		VCC = ±15 V	RL = 250 Ω	±12	±13
		VCC = ±5 V	RL = 150 Ω	±3	±3.4
IO	Output current	VCC = ±15 V	RL = 20 Ω	70	115		mA
		VCC = ±5 V		50	75
IOS	Short-circuit output current	VCC = ±15 V	TA = 25°C		150		mA
RO	Output resistance	Open loop			12		Ω

² Full range = ±55°C to 125°C for the M suffix.

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

9