MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
|
MAC12 |
|
SERIES* |
Advance Information |
*Motorola preferred devices |
TRIACS
Silicon Bidirectional Thyristors
Designed for high performance full±wave ac control applications where high noise immunity and commutating di/dt are required.
•Blocking Voltage to 800 Volts
•On-State Current Rating of 12 Amperes RMS at 70°C
•Uniform Gate Trigger currents in Three Modes
•High Immunity to dv/dt Ð 250 V/ ms minimum at 125°C
•High Commutating di/dt Ð 6.5 A/ms minimum at 125°C
•Industry Standard TO±220 AB Package
•High Surge Current Capability Ð 120 Amperes
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
TRIACS
12 AMPERES RMS
400 thru 800 VOLTS
MT2
MT1
MT2
G
CASE 221A±06 (TO-220AB)
Style 4
Parameter |
|
Symbol |
Value |
Unit |
|
|
|
|
|
Peak Repetitive Off-State Voltage (1) |
|
VDRM |
|
Volts |
(TJ = ±40 to 125°C, Sine Wave, 50 to 60 Hz, Gate Open) |
MAC12D |
|
400 |
|
|
MAC12M |
|
600 |
|
|
MAC12N |
|
800 |
|
|
|
|
|
|
On-State RMS Current |
|
IT(RMS) |
12 |
A |
(Full Cycle Sine Wave, 60 Hz, TC = 70°C) |
|
|
|
|
Peak Non-repetitive Surge Current |
|
ITSM |
100 |
A |
(One Full Cycle, 60 Hz, TJ = 125°C) |
|
|
|
|
Circuit Fusing Consideration (t = 8.3 ms) |
|
I2t |
41 |
A2sec |
Peak Gate Power (Pulse Width ≤ 1.0 ms, TC = 80°C) |
|
PGM |
16 |
Watts |
Average Gate Power (t = 8.3 ms, TC = 80°C) |
|
PG(AV) |
0.35 |
Watts |
Operating Junction Temperature Range |
|
TJ |
± 40 to +125 |
°C |
Storage Temperature Range |
|
Tstg |
± 40 to +150 |
°C |
THERMAL CHARACTERISTICS |
|
|
|
|
|
|
|
|
|
Thermal Resistance Ð Junction to Case |
|
RqJC |
2.2 |
°C/W |
Thermal Resistance Ð Junction to Ambient |
|
RqJA |
62.5 |
|
Maximum Lead Temperature for Soldering Purposes 1/8″ from Case for 10 Seconds |
TL |
260 |
°C |
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted)
Characteristic |
Symbol |
Min |
Typ |
Max |
Unit |
|
|
|
|
|
|
OFF CHARACTERISTICS
Peak Repetitive Blocking Current |
TJ = 25°C |
IDRM |
Ð |
Ð |
0.01 |
mA |
(VD = Rated VDRM, Gate Open) |
TJ =1 25°C |
|
Ð |
Ð |
2.0 |
|
(1) VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
This document contains information on a new product. Specifications and information herein are subject to change without notice.
Preferred devices are Motorola recommended choices for future use and best overall value.
REV 1
Motorola Thyristor Device Data |
3±53 |