Fairchild Semiconductor DM74S00N, DM74S00M, DM74S00CW Datasheet

August 1986

Revised May 2000

DM74S00

Quad 2-Input NAND Gate

General Description

This device contains four independent gates each of which performs the logic NAND function.

Ordering Code:

Order Number	Package Number	Package Description
DM74S00M	M14A	14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow
DM74S00N	N14A	14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide

Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Connection Diagram	Function Table
				Y =	AB
		Inputs					Output
		A		B			Y
		L		L			H
		L		H			H
		H		L			H
		H		H			L
	H = HIGH Logic Level
	L = LOW Logic Level

Gate NAND Input-2 Quad DM74S00

© 2000 Fairchild Semiconductor Corporation

DS006489

www.fairchildsemi.com

DM74S00

Absolute Maximum Ratings(Note 1)

	Supply Voltage	7V	Note 1: The “Absolute Maximum Ratings” are those values beyond which
			the safety of the device cannot be guaranteed. The device should not be
	Input Voltage	5.5V	operated at these limits. The parametric values defined in the Electrical
			Characteristics tables are not guaranteed at the absolute maximum ratings.
	Operating Free Air Temperature Range	0° C to + 70° C
			The “Recommended Operating Conditions” table will define the conditions
	Storage Temperature Range	− 65° C to + 150° C	for actual device operation.

Recommended Operating Conditions

Symbol	Parameter	Min	Nom	Max	Units
VCC	Supply Voltage	4.75	5	5.25	V
VIH	HIGH Level Input Voltage	2			V
VIL	LOW Level Input Voltage			0.8	V
IOH	HIGH Level Output Current			− 1	mA
IOL	LOW Level Output Current			20	mA
TA	Free Air Operating Temperature	0		70	° C

Electrical Characteristics

over recommended operating free air temperature range (unless otherwise noted)

Symbol	Parameter		Conditions		Min	Typ	Max	Units
						(Note 2)
VI	Input Clamp Voltage	VCC =	Min, II = −	18 mA			− 1.2	V
VOH	HIGH Level	VCC =	Min, IOH =	Max	2.7	3.4		V
	Output Voltage	VIL =	Max
VOL	LOW Level	VCC =	Min, IOL =	Max			0.5	V
	Output Voltage	VIH =	Min
II	Input Current @ Max Input Voltage	VCC =	Max, VI =	5.5V			1	mA
IIH	HIGH Level Input Current	VCC =	Max, VI =	2.7V			50	µ A
IIL	LOW Level Input Current	VCC =	Max, VI =	0.5V			− 2	mA
IOS	Short Circuit Output Current	VCC =	Max (Note 3)		− 40		− 100	mA
ICCH	Supply Current with Outputs HIGH	VCC =	Max			10	16	mA
ICCL	Supply Current with Outputs LOW	VCC =	Max			20	36	mA

Switching Characteristics

at VCC =	5V and TA = 25° C (See Section 1 for Test Waveforms and Output Load)
					RL =	280Ω
Symbol		Parameter		CL =	15 pF	CL =	50 pF	Units
				Min	Max	Min	Max
tPLH		Propagation Delay Time		2	4.5	2	7	ns
		LOW-to-HIGH Level Output
tPHL		Propagation Delay Time		2	5	2	8	ns
		HIGH-to-LOW Level Output
Note 2: All		typicals are at VCC = 5V, TA = 25° C.

Note 3: Not more than one output should be shorted at a time and the duration should not exceed one second.

www.fairchildsemi.com

2