INSTALLATION
MANUAL
R22 SPLIT SERIES
Installation Manual |
English |
|
R22 Split Series |
||
|
||
|
|
MODELS
FDM20JEV1K RD20JEV1K
FDM25JEV1K RD25JEV1K
FDM30JEV1K RD30JEV1K
FDM40JEV1K RD40JEV1K
RD40JEY1K
FDM50JEV1K RD50JEY1K
FDM60JEV1K RD60JEY1K
OUTLINE AND DIMENSIONS
Indoor Unit
All dimensions are in mm
B
|
|
|
|
D |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
I |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
J |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
K |
|
|
|
|
|
<![if ! IE]> <![endif]>H |
|
|
|
|
|
|
|
|
O |
|
|
|
<![if ! IE]> <![endif]>L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
E |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>A |
|
|
M |
N |
|
|
|
G |
|
|
|
|
|
|
|
|
|
|
|
|
F |
|
|
|
|
|
|
|
|
|
|
|
|
Dimension |
A B C D E F G H |
I |
J K L M N O |
|||||||||||||
Model |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
FDM20JEV1K |
31 |
1041 |
1002 |
962 |
10 |
1065 |
72 |
261 |
411 |
351 |
225 |
211 |
232 |
213 |
114 |
|
FDM25JEV1K |
31 |
1176 |
1137 |
1097 |
10 |
1200 |
72 |
261 |
411 |
351 |
225 |
211 |
232 |
213 |
114 |
Indoor Unit
K |
All dimensions are in mm |
|
|
|
|
<![endif]>J
|
I |
|
|
|
H |
|
|
|
|
|
L |
|
|
|
M |
<![if ! IE]> <![endif]>B |
|
<![if ! IE]> <![endif]>G |
<![if ! IE]> <![endif]>N |
|
<![if ! IE]> <![endif]>P |
||
<![if ! IE]> <![endif]>A |
|
|
|
D |
E |
F |
<![if ! IE]> <![endif]>O |
|
|||
|
C |
|
|
Dimension |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
L |
M |
N |
O |
P |
|
Model |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FDM30JEV1K |
40 |
292 |
1295 |
232 |
213 |
70 |
128 |
1228 |
1185 |
284 |
1262 |
460 |
420 |
241 |
12 |
230 |
|
FDM40JEV1K |
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<![endif]>Original Instruction English
OUTLINE AND DIMENSIONS
Indoor Unit
All dimensions are in mm
E E
K |
A |
A |
K |
|
|
|
B |
|
|
|
|
C |
|
|
|
|
|
|
G |
|
|
D |
|
H |
<![if ! IE]> <![endif]>L |
|
|
|
<![if ! IE]> <![endif]>I |
|
|
|
<![if ! IE]> <![endif]>F |
<![if ! IE]> <![endif]>J |
|
M |
N |
|
|
Dimension |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
L |
M |
N |
|
Model |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FDM50JEV1K |
359 |
1369 |
1326 |
1287 |
594 |
384 |
541 |
256 |
173 |
306 |
256 |
161 |
248 |
220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FDM60JEV1K |
359 |
1569 |
1526 |
1487 |
694 |
378 |
541 |
256 |
173 |
306 |
356 |
161 |
248 |
220 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Outdoor Unit
<![endif]>P
<![if ! IE]><![endif]>B
<![if ! IE]><![endif]>Q
L |
K |
L |
All dimensions are in mm |
|
|
|
|
<![if ! IE]> <![endif]>N |
|
|
|
|
<![if ! IE]> <![endif]>M |
|
|
|
|
<![if ! IE]> <![endif]>T |
|
|
|
A |
<![if ! IE]> <![endif]>N |
C |
|
|
|
||
|
|
G |
H |
|
O |
D |
|
||
|
|
|
<![if ! IE]> <![endif]>F |
|
|
|
|
<![if ! IE]> <![endif]>E |
|
<![if ! IE]> <![endif]>S |
<![if ! IE]> <![endif]>R |
I J
Dimension |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
L |
M |
N |
O |
P |
Q |
R |
S |
T |
Model |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RD20JEV1K |
855 |
628 |
328 |
520 |
181 |
44 |
93 |
149 |
101 |
113 |
603 |
126 |
164 |
17 |
34 |
3 |
23 |
73 |
75 |
362 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RD25/30JEV1K |
855 |
730 |
328 |
520 |
182 |
44 |
93 |
149 |
101 |
113 |
603 |
126 |
164 |
17 |
34 |
3 |
23 |
73 |
75 |
362 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Outdoor Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All dimensions are in mm |
||||||
|
|
|
|
|
A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N |
|
|
|
|
|
M |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P |
|
|
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>K |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
T |
|
C |
|
|
|
|
|
|
|
|
|
|
D |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
<![if ! IE]> <![endif]>B |
<![if ! IE]> <![endif]>F |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>E |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
G |
<![if ! IE]> <![endif]>S |
|
|
|
<![if ! IE]> <![endif]>H |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
U |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
Q |
|
|
|
J |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Dimension |
A |
B |
C |
D |
E |
F |
G |
H |
J |
K |
L |
M |
N |
P |
Q |
R |
S |
T |
U |
|
Model |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RD40JEV1K |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RD40JEY1K |
1030 |
852 |
428 |
410 |
412 |
827 |
72 |
196 |
91 |
488 |
448 |
142 |
141 |
83 |
23 |
49 |
26 |
28 |
80 |
|
RD50JEY1K |
||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
RD60JEY1K |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<![endif]>English
INSTALLATION MANUAL
This manual provides the procedures of installation to ensure a safe and good standard of operation for the air conditioner unit. Special adjustment may be necessary to suit local requirements.
Before using your air conditioner, please read this instruction manual carefully and keep it for future reference.
This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for commercial use by lay persons.
This appliance is not intended for use by persons, including children, with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
SAFETY PRECAUTIONS
!WARNING
•Installation and maintenance should be performed by qualiÞed persons who are familiar with local code and regulation, and experienced with this type of appliance.
•All Þeld wiring must be installed in accordance with the national wiring regulation.
•Ensure that the rated voltage of the unit corresponds to that of the name plate before commencing wiring work according to the wiring diagram.
•The unit must be GROUNDED to prevent possible hazard due to insulation failure.
•All electrical wiring must not touch the refrigerant piping, or any moving parts of the fan motors.
•ConÞrm that the unit has been switched OFF before installing or servicing the unit.
•Disconnect from the main power supply before servicing the air conditioner unit.
•DO NOT pull out the power cord when the power is ON. This may cause serious electrical shocks which may result in Þre hazards.
•Keep the indoor and outdoor units, power cable and transmission wiring, at least 1m from TVs and radios, to prevent distorted pictures and static. (Depending on the type and source of the electrical waves, static may be heard even when more than 1m away).
! CAUTION
Please take note of the following important points when installing.
•Do not install the unit where leakage of flammable gas may occur.
If gas leaks and accumulates around the unit, it may cause fire ignition.
• Ensure that drainage piping is connected properly.
If the drainage piping is not connected properly, it may cause water leakage which will dampen the furniture.
• Do not overcharge the unit.
This unit is factory pre-charged.
Overcharge will cause over-current or damage to the compressor.
•Ensure that the unit’s panel is closed after service or installation.
Unsecured panels will cause the unit to operate noisily.
•Sharp edges and coil surfaces are potential locations which may cause injury hazards.
Avoid from being in contact with these places.
•Before turning off the power supply, set the remote controller’sON/OFFswitchtothe“OFF”positiontoprevent the nuisance tripping of the unit. If this is not done, the unit’s fanswill start turning automatically when power resumes, posing a hazard to service personnel or the user.
•Do not install the units at or near doorway.
•Do not operate any heating apparatus too close to the air conditioner unit or use in room where mineral oil, oil vapour or oil steam exist, this may cause plastic part to melt or deform as a result of excessive heat or chemical reaction.
•When the unit is used in kitchen, keep flour away from going into suction of the unit.
•This unit is not suitable for factory used where cutting oil mist or iron powder exist or voltage fluctuates greatly.
•Do not install the units at area like hot spring or oil refinery plant where sulphide gas exists.
•Ensure the color of wires of the outdoor unit and the terminal markings are same to the indoors respectively.
•IMPORTANT: DO NOT INSTALL OR USE THE AIR CONDITIONER UNIT IN A LAUNDRY ROOM.
•Don’t use joined and twisted wires for incoming power supply.
•The equipment is not intended for use in a potentially explosive atmosphere.
NOTICE
Disposal requirements
Your air conditioning product is marked with this symbol. This means that electrical and electronic products shall not be mixed with unsorted household waste.
Do not try to dismantle the system yourself: the dismantling of the air conditioning system, treatment of the refrigerant, of oil and of other parts must be done by a qualiÞed installer in accordance with relevant local and national legislation. Air conditioners must be treated at a specialized treatment facility for re-use, recycling and recovery. By ensuring this product is disposed of correctly, you will help to prevent potential negative consequences for the environment and human health. Please contact the installer or local authority for more information.
Batteries must be removed from the remote controller and disposed of separately in accordance with relevant local and
INSTALLATION DIAGRAM
Indoor unit
Hanger
Return Duct
Supply Duct
Wrap the insulated pipe with the Þnishing tape from bottom to top
Drain Piping |
Thermal Insulation |
|
Air Intake
Air Intake
Air Discharge
Outdoor unit
<![endif]>English
INSTALLATION OF THE INDOOR UNIT
The indoor unit must be installed such that there is no short circuit of the cool discharge. Respect the installation clearance. Do not put the indoor unit where there is direct sunlight on unit. The location is suitable for piping and drainage and it must have a large distance between a door and unit.
Ceiling Concealed Mounting
•Use the hanger supplied with the unit.
•Make sure that the ceiling is sufÞciently strong to withstand the weight.
Insulation material |
See Detail A |
|
|
(Þeld supply) |
Air inlet side |
|
|
Air outlet side |
|
Aluminium tape |
Aluminium tape |
(Þeld supply) |
(Þeld supply) |
|
Field supply |
|
Washer for hanger bracket |
|
(attached) |
Tighten
Detail A
Center distance of axle (see drawing below)
A |
L |
Model |
A mm (inch) |
L mm (inch) |
|
|
|
FDM20JEV1K |
1041(41.0) |
225(8.9) |
|
|
|
FDM25JEV1K |
1176(46.3) |
225(8.9) |
|
|
|
FDM30JEV1K |
1262 (49.7) |
284 (11.2) |
|
|
|
FDM40JEV1K |
1262 (49.7) |
284 (11.2) |
|
|
|
FDM50JEV1K |
1326 (52.2) |
256 (10.1) |
|
|
|
FDM60JEV1K |
1526 (60.1) |
256 (10.1) |
|
|
|
Provide clearance for servicing ease and optimal air ßow as shown in the diagram.
|
|
300mm |
|
|
or more |
<![if ! IE]> <![endif]>10mm |
300mm* or more |
Ceiling |
|
|
2300mm or more
Floor
* Can be smaller than 300mm if ceiling is removable.