Loading...Dell PowerEdge Rack Enclosure 2410 Cabling R715, PowerEdge Rack Enclosure 4620S Cabling R715 White Paper
Cable Routing Procedures for
Dell™PowerEdge™R715Systems
A Dell™ Technical White Paper
Dell™ │ Datacenter Infrastructure Engineering
By Chris Kitten and Jose L. Flores
July 2010
Cable Routing Procedures for Dell™ PowerEdge™ R715 Systems
THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANY KIND.
© 2010 Dell Inc. All rights reserved. Reproduction of this material in any manner whatsoever without the express written permission of Dell Inc. is strictly forbidden. For more information, contact Dell.
Dell, the DELL logo, the DELL badge, and PowerEdge are trademarks of Dell Inc.
Page ii
Cable Routing Procedures for Dell™ PowerEdge™ R715 Systems |
|
|
Contents |
|
|
Introduction ........................................................................................................................................................... |
2 |
|
Section 1: Cabling a Dell™ PowerEdge™ R715 With a Cable Management Arm (CMA).......................... |
2 |
|
1.1 |
Connecting the CMA Cables to the System ....................................................................................... |
2 |
1.2 |
Routing the Power Cables Through the Strain Reliefs...................................................................... |
3 |
1.3 |
Routing the Cables Through the CMA................................................................................................. |
3 |
1.4 |
Left-Side Mounting Instructions ........................................................................................................... |
3 |
1.5 |
Right-Side Mounting Instructions......................................................................................................... |
5 |
Section 2: Cabling a Dell™ PowerEdge™ R715 System Without a CMA .................................................... |
6 |
|
2.1 |
Routing the Cables .................................................................................................................................. |
6 |
2.2 |
Removing the CMA Brackets for Shallow Racks ................................................................................ |
6 |
Section 3: Replacing a Power Supply on a PowerEdge™ R715 System With a CMA ................................ |
7 |
|
3.1 |
Replacing a Power Supply with a Left-Side Mounted CMA.............................................................. |
7 |
3.2 |
Replacing a Power Supply with a Right-Side Mounted CMA ........................................................... |
7 |
Table of Figures |
|
|
Figure 1: System with Cables Installed .................................................................................................................. |
2 |
|
Figure 2: Routing Power Cables Through the Strain Reliefs ............................................................................. |
3 |
|
Figure 3: Routing the Cables Through the CMA ................................................................................................. |
4 |
|
Figure 4: Left-Side Mounted CMA Installation..................................................................................................... |
4 |
|
Figure 5: Right-Side Mounted CMA Installation .................................................................................................. |
5 |
|
Figure 6: Cable Routing Without a CMA ............................................................................................................... |
6 |
|
Figure 7: Removing the CMA Brackets for Shallow Racks................................................................................. |
6 |
|
Figure 8: Replacing the Power Supply ................................................................................................................... |
7 |
|
Page 1
Loading...