Dell EMC Networking OS10 Enterprise Edition
Deployment Guide with Cisco ACI
Abstract
This document provides steps for the configuration and deployment of
Dell EMC Networking switches running Dell EMC OS10 Enterprise
Edition, into a Cisco ACI environment.
December 2018
Dell EMC Configuration and Deployment Guide
Revisions
Date Description
December 2018 Initial release
The information in this publication is provided “as is.” Dell Inc. makes no representations or warranties of any kind with respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular purpose.
Use, copying, and distribution of any software described in this publication requires an applicable software license.
© 2018 Dell Inc. or its subsidiaries. All Rights Reserved. Dell, EMC, Dell EMC and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
Dell believes that the information in this document is accurate as of its publication date. The information is subject to change without notice.
2 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI
Table of contents
|
Revisions |
............................................................................................................................................................................. |
2 |
|
1 |
Introduction................................................................................................................................................................... |
5 |
||
|
|
1.1 |
Typographical conventions ................................................................................................................................. |
5 |
|
|
1.2 ........................................................................................................................................................ |
Attachments |
6 |
2 |
Hardware .......................................................................................................................................................overview |
7 |
||
|
|
2.1 ..................................................................................................................... |
Dell EMC Networking S5248F - ON |
7 |
|
|
2.2 ..................................................................................................................... |
Dell EMC Networking S4148F - ON |
7 |
|
|
2.3 ....................................................................................................................... |
Dell EMC Networking S3048 - ON |
7 |
|
|
2.4 ............................................................................................................................... |
Cisco Nexus C93180YC - EX |
8 |
|
|
2.5 ..................................................................................................................................... |
Cisco Nexus C9336 - PQ |
8 |
|
|
2.6 ............................................................................................................................ |
Supported Dell EMC switches |
8 |
3 |
Cisco ..............................................................................................................Application Centric Infrastructure (ACI) |
9 |
||
4 |
Dell EMC .................................................................................ToR switches with Cisco ACI environment overview |
10 |
||
|
|
4.1 ...................................................................................................................................... |
Validated environment |
11 |
5 |
OOB Management ........................................................................................................................................network |
13 |
||
6 |
Cisco ...........................................................................................................................................APIC configuration |
15 |
||
7 |
Configure .................................................................................................................................S5248F-ON switches |
17 |
||
|
|
7.1 ...................................................................................................................... |
OOB management configuration |
17 |
|
|
7.2 .............................................................................................................................................. |
VLT configuration |
17 |
|
|
7.3 ........................................................................................................................................ |
Configure the VLANs |
18 |
|
|
7.4 ............................................................................................................................... |
Server - facing configuration |
19 |
|
|
7.5 ........................................................................................................................ |
Switch pair uplink configuration |
20 |
8 |
vCenter ..................................................................................................................................configuration overview |
21 |
||
9 |
Verify .....................................................................................................................................................configuration |
23 |
||
|
|
9.1 ........................................................................................................................... |
Validation using OS10EE CLI |
23 |
|
|
9.1.1 ........................................................................................................................ |
show vlt [domain - id] command |
23 |
|
|
9.1.2 ................................................................................................... |
show vlt [domain - id] vlt - port - detail command |
24 |
|
|
9.1.3 ............................................................................................. |
show interface port channel summary command |
24 |
|
|
9.1.4 ......................................................................................................................... |
show lldp neighbors command |
24 |
|
|
9.1.5 ................................................................................................................. |
show spanning - tree brief command |
25 |
|
|
9.1.6 ................................................................................................................... |
show uplink state group command |
25 |
|
|
9.2 ......................................................................................................................................... |
Cisco ACI validation |
26 |
|
|
9.2.1 ................................................................................................................................... |
Verify vPC configuration |
26 |
|
|
9.2.2 .............................................................................................................. |
Verify physical interface configuration |
28 |
|
|
9.2.3 ....................................................................................................................... |
Verify ACI is learning endpoints |
29 |
3 |
Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI |
|
|
9.3 |
Verify connectivity between VMs...................................................................................................................... |
30 |
A |
Additional information................................................................................................................................................. |
31 |
|
|
A.1 |
Reset OS10EE switches to factory defaults..................................................................................................... |
31 |
|
A.2 |
Spanning Tree Protocol recommendations ...................................................................................................... |
31 |
B |
Validated components................................................................................................................................................ |
32 |
|
|
B.1 |
Dell EMC Networking switches......................................................................................................................... |
32 |
|
B.2 |
Cisco ACI components ..................................................................................................................................... |
32 |
C |
Technical resources ................................................................................................................................................... |
33 |
|
D |
Support and feedback ................................................................................................................................................ |
34 |
4 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI
Dell EMC Networking is committed to providing customers with modern data center networking technology to be the foundation for digital transformation. Customers can choose from a wide range of industry-standard network applications, operating systems, and hardware platforms to realize cost savings and improvement in service agility.
This document provides an example for the deployment of a pair of top-of-rack (ToR) Dell EMC Networking switches into an existing Cisco Application Centric Infrastructure (ACI) environment. The example details how Layer 2 domains can be extended into and out of an ACI fabric with Dell EMC Networking switches in a way that provides high throughput and failure tolerance. The example shows how devices that are connected to Dell EMC Networking switches can be integrated with the ACI fabric to communicate with and access ACI resources.
Dell EMC Networking S5248F-ON switch
The deployment example includes instructions to configure a pair of Dell EMC S5248F-ON switches. The example demonstrates connectivity to a pair of Cisco Nexus C93180YC-EX switches in ACI mode.
Table 1 outlines what this document is and is not.
Dell EMC Networking OS10EE Deployment Guide with Cisco ACI
|
This guide is |
|
|
This guide is not/does not |
|
|
|
|
|
||
|
|
|
|
|
|
|
A reference for basic configuration of a top-of- |
|
A guide for all features of OS10EE-based |
||
|
rack (ToR) pair of switches using OS10EE |
|
switches |
||
|
|
|
|
||
|
An example of one way to add ToR switches to |
|
A guide for adding Cisco ACI to a complete leaf- |
||
|
an existing Cisco ACI environment |
|
spine deployment |
||
|
|
|
|
|
|
The CLI and GUI examples in this document use the following conventions:
Monospace Text |
CLI examples |
Underlined Monospace Text |
CLI examples that wrap the page |
Italic Monospace Text |
Variables in CLI examples |
Bold Monospace Text |
Commands entered at the CLI prompt, or to highlight information in CLI |
|
output |
Bold text |
UI elements and information that is entered in the GUI |
5 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI
This document in .pdf format includes one or more file attachments. To access attachments in Adobe Acrobat Reader, click the icon in the left pane halfway down the page, and then click the icon.
6 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI
This section briefly describes the hardware that is used to validate the deployment examples in this document. Appendix B contains a complete listing of hardware and software that is validated for this guide.
Note: While the steps in this document were validated using the specified Dell EMC Networking switches and operating systems, they may be used for other Dell EMC Networking switch models using the same networking operating system version or later assuming the switch has the available port numbers, speeds, and types. The two switch models in this section are detailed based on being the most commonly deployed ToR switches in the current portfolio.
2.1Dell EMC Networking S5248F-ON
The Dell EMC Networking S5248F-ON is a 1-Rack Unit (RU) switch with forty-eight 25GbE SFP28 ports, two 2x100GbE QSFP28-DD ports, and four 100GbE QSFP28 ports. The high-performance S5248F-ON switch is an optimal choice for ToR environments requiring connectivity for 10GbE and 25GbE compute and storage.
Dell EMC Networking S5248F-ON switch
2.2Dell EMC Networking S4148F-ON
The Dell EMC Networking S4148F-ON is a 1-RU switch with forty-eight 10GbE SFP+ ports, two 40GbE QSFP+ ports, and four 100GbE QSFP28 ports. The high-performance S4148F-ON switch is an optimal choice for ToR environments requiring connectivity for 10GbE compute and storage.
Dell EMC Networking S4148F-ON switch
2.3Dell EMC Networking S3048-ON
The Dell EMC Networking S3048-ON is a 1-RU switch with forty-eight 1GbE BASE-T ports and four 10GbE SFP+ ports. In this document, one S3048-ON supports out-of-band (OOB) management traffic for all examples.
7 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI
2.4Cisco Nexus C93180YC-EX
The Cisco Nexus C93180YC-EX switch is a 1-RU switch with forty-eight 1/10/25GbE ports and six 40/100GbE ports. A pair of Cisco Nexus C93180YC-EX switches are used as Cisco ACI leaf switches in the demonstrated environment in this guide.
2.5Cisco Nexus C9336-PQ
The Cisco Nexus C9336-PQ switch is a 2-RU switch with thirty-six 40GbE QSFP+ ports. One Cisco Nexus C9336-PQ switch is used as a Cisco ACI spine switch in the demonstrated environment in this guide.
The switch models highlighted in blue in Table 2, have been validated in the lab environment that is detailed in section 0. All Dell EMC Networking switches that run the OS10EE operating system can be used in a similar deployment with Cisco ACI. Tested and supported features in the Cisco ACI environment include VLT and Layer 2 operation.
Supported Dell EMC Networking switches
Dell EMC Networking Switch |
OS10EE, version 10.4.0R3 and later |
|
|
S5248F-ON |
Supported, validated version 10.4.2 |
S4148F-ON |
Supported |
S5048F-ON |
Supported |
S5148F-ON |
Supported |
S5296F-ON |
Supported |
S5232F-ON |
Supported |
S6010-ON |
Supported |
S6100-ON |
Supported |
S4048-ON |
Supported |
S4048T-ON |
Supported |
S4112F-ON |
Supported, validated version 10.4.2 |
S4112T-ON |
Supported |
S4128F-ON |
Supported |
S4128T-ON |
Supported |
S4148T-ON |
Supported |
S4148FE |
Supported |
S4148U |
Supported, validated version 10.4.2 |
S4248FB-ON |
Supported |
S4248FBL-ON |
Supported |
|
|
Note: Dell EMC provides this supported list as is, without express or implied warranties of any kind. This list is for informational purposes only and may contain typographical and technical inaccuracies. Dell EMC is not liable for any damages that arise out of or in connection with the use of the information provided in this list.
Table 2 includes only switches that are commonly deployed as ToR switches. All switch models that run OS10EE deployed in a VLT topology in Layer 2 operation can be considered. Some switches contain features, such as Fibre Channel, that have not been validated to work with Cisco API and is out of the scope of this document.
8 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI
Cisco ACI is an application focused, software-defined networking solution utilizing both software and traditional switching hardware. The solution is an overlay on Cisco’s high-performance switches, operating in an ACI mode managed by a controller. The Cisco Application Policy Infrastructure Controller (APIC) is a central management appliance that handles policy, visibility, security, and overall network control for the ACI environment.
Cisco ACI provides the following features within the ACI domain:
•Multi-tenant security
•Microsegmentation
•Application specific policy management
•Network availability and QoS
•Network automation
9 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI
The example that is shown in this paper covers deploying S5248F-ON switches connected to a Cisco ACI environment. By integrating the ToR switch pair into an ACI environment, compute resources within the rack can use ACI gateways and access ACI resources.
The validated Cisco ACI environment includes a pair of Nexus C93180YC-EX switches as leaf switches as shown in Figure 5. The C93180YC-EX leaf switch pair are connected to a single Nexus C9336-PQ spine using 40GbE uplinks (not shown).
Dell EMC Networking switches connected to Cisco ACI leaf switches
Connections from S5248F-ON switches to the C93180YC-EX leaf pair are 100 GbE. These connections are shown in blue in Figure 5.
Note: The wiring diagram in Figure 5 is drawn to show the types of connections in a carefully arranged fashion for clarity. The port numbers and connection locations may differ in the actual deployment.
No physical peer link is used between the Cisco ACI leaf switches. See the Cisco ACI documentation for more information.
10 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI
In this example, two S5248F-ON switches are joined to an existing Cisco ACI environment. The rack contains two S5248F-ON and four PowerEdge R730xd servers.
The connections between the ACI environment and the S5248F-ON switches consist of double-sided multichassis link aggregation group (MLAG). The double-sided MLAG connection consists of a vPC on the Cisco ACI side and a VLT port channel on the S5248F-ON side.
All of the devices in the validated environment that are covered in this chapter, are connected as shown in Figure 6.
Validated Dell EMC ToR and ACI environment
Note: No physical peer link is used between the Cisco ACI leaf switches. See the Cisco ACI documentation for more information. Cisco recommends a minimum of three Application Policy Infrastructure Controllers (APICs) in a production environment. For this validation effort, a single APIC, named APIC-1, is used.
All Dell EMC PowerEdge R730xd rack servers in this example are running VMware ESXi 6.7.0. VMs named “web,” “app,” and “db” on the ESXi hosts are running Ubuntu Linux guest operating systems.
11 Dell EMC Networking OS10 Enterprise Edition Deployment Guide with Cisco ACI