Motorola MC3458P1, MC3458D, MC3358D, MC3358DR2, MC3358P1 Datasheet

Order this document by MC3458/D

Dual, Low Power

Operational Amplifiers

Utilizing the circuit designs perfected for the quad operational amplifiers, these dual operational amplifiers feature: 1) low power drain, 2) a common mode input voltage range extending to ground/VEE, and 3) Single Supply or Split Supply operation.

These amplifiers have several distinct advantages over standard operational amplifier types in single supply applications. They can operate at supply voltages as low as 3.0 V or as high as 36 V with quiescent currents about one±fifth of those associated with the MC1741C (on a per amplifier basis). The common mode input range includes the negative supply, thereby eliminating the necessity for external biasing components in many applications. The output voltage range also includes the negative power supply voltage.

•Short Circuit Protected Outputs

•True Differential Input Stage

•Single Supply Operation: 3.0 V to 36 V

•Low Input Bias Currents

•Internally Compensated

•Common Mode Range Extends to Negative Supply

•Class AB Output Stage for Minimum Crossover Distortion

•Single and Split Supply Operations Available

•Similar Performance to the Popular MC1458

MAXIMUM RATINGS

Rating	Symbol	Value	Unit
Power Supply Voltages			Vdc
Single Supply	VCC	36
Split Supplies	VCC, VEE	±18
Input Differential Voltage Range (1)	VIDR	±30	Vdc
Input Common Mode Voltage Range (2)	VICR	±15	Vdc
Junction Temperature	TJ	150	°C
Storage Temperature Range	Tstg	±55 to +125	°C
Operating Ambient Temperature Range	TA		°C
MC3458		0 to +70
MC3358		±40 to +85

NOTES: 1. Split Power Supplies.

2.For supply voltages less than ±18 V, the absolute maximum input voltage is equal to the supply voltage.

MC3458

MC3358

DUAL DIFFERENTIAL

INPUT

OPERATIONAL AMPLIFIERS

SEMICONDUCTOR

TECHNICAL DATA

8

1

P1 SUFFIX

PLASTIC PACKAGE

CASE 626

8

1

D SUFFIX

PLASTIC PACKAGE

CASE 751 (SO±8)

	PIN CONNECTIONS
	Output A 1		8	VCC
	2	±	7	Output B
	Inputs A
		+
	3		6
		±		Inputs B
	VEE/Gnd 4	+	5
		(Top View)

ORDERING INFORMATION

		Operating
	Device	Temperature Range	Package
	MC3358P1	TA = ±40° to +85°C	Plastic DIP
	MC3458D	TA = 0° to +70°C	SO±8
	MC3458P1		Plastic DIP

Motorola, Inc. 1996

Rev 0

MC3458 MC3358

ELECTRICAL CHARACTERISTICS (For MC3458, VCC = +15 V, VEE = ±15 V, TA = 25°C, unless otherwise noted.) (For MC3358, VCC = +14 V, VEE = Gnd, TA = 25°C, unless otherwise noted.)

					MC3458			MC3358
Characteristic		Symbol									Unit
				Min	Typ	Max	Min	Typ	Max
Input Offset Voltage		VIO		±	2.0	10	±	2.0	8.0		mV
TA = Thigh to Tlow (Note 1)				±	±	12	±	±	10
Input Offset Current		IIO		±	30	50	±	30	75		nA
TA = Thigh to Tlow				±	±	200	±	±	250
Large Signal Open Loop Voltage Gain		AVOL									V/mV
VO = ±10 V, RL = 2.0 kΩ,				20	200	±	20	200	±
TA = Thigh to Tlow				15	±	±	15	±	±
Input Bias Current		IIB		±	±200	±500	±	±200	±500		nA
TA = Thigh to Tlow				±	±	±800	±	±	±1000
Output Impedance, f = 20 Hz		zO		±	75	±	±	75	±		Ω
Input Impedance, f = 20 Hz		zI		0.3	1.0	±	0.3	1.0	±		MΩ
Output Voltage Range		VOR									V
RL = 10 kΩ				±12	±13.5	±	12	12.5	±
RL = 2.0 kΩ				±10	±13	±	10	12	±
RL = 2.0 kΩ, TA = Thigh to Tlow				±10	±	±	10	±	±
Input Common Mode Voltage Range		VICR		+13	+13.5	±	+13	+13.5	±		V
				±VEE	±VEE		±VEE	±VEE
Common Mode Rejection Ratio, RS ≤ 10 kΩ		CMR		70	90	±	70	90	±		dB
Power Supply Current (VO = 0) RL = ∞		ICC, IEE		±	1.6	3.7	±	1.6	3.7		mA
Individual Output Short Circuit Current (Note 2)		ISC		±10	±20	±45	±10	±30	±45		mA
Positive Power Supply Rejection Ratio		PSRR+		±	30	150	±	30	150		μV/V
Negative Power Supply Rejection Ratio		PSRR±		±	30	150	±	±	±		μV/V
Average Temperature Coefficient of Input		IIO/	T	±	50	±	±	50	±		pA/°C
Offset Current, TA = Thigh to Tlow
Average Temperature Coefficient of Input		VIO/	T	±	10	±	±	10	±		μV/°C
Offset Current, TA = Thigh to Tlow
Power Bandwidth		BWp		±	9.0	±	±	9.0	±		kHz
AV = 1, RL = 2.0 kΩ, VO = 20 Vpp, THD = 5%
Small Signal Bandwidth		BW		±	1.0	±	±	1.0	±		MHz
AV = 1, RL = 10 kΩ, VO = 50 mV
Slew Rate		SR		±	0.6	±	±	0.6	±		V/μs
AV = 1, VI = ±10 V to +10 V
Rise Time		tTLH		±	0.35	±	±	0.35	±		μs
AV = 1, RL = 10 kΩ, VO = 50 mV
Fall Time		tTHL		±	0.35	±	±	0.35	±		μs
AV = 1, RL = 10 kΩ, VO = 50 mV
Overshoot		os		±	20	±	±	20	±	%
AV = 1, RL = 10 kΩ, VO = 50 mV
Phase Margin		φm		±	60	±	±	60	±		Degrees
AV = 1, RL = 2.0 kΩ, CL = 200 pF
Crossover Distortion		±		±	1.0	±	±	1.0	±	%
(Vin = 30 mVpp, Vout = 2.0 Vpp, f = 10 kHz)
NOTES: 1. Thigh = 70°C for MC3458, 85°C for MC3358
Tlow = 0°C for MC3458, ±40°C for MC3358
2. Not to exceed maximum package power dissipation.

2	MOTOROLA ANALOG IC DEVICE DATA

MC3458 MC3358

ELECTRICAL CHARACTERISTICS (VCC = 5.0 V, VEE = Gnd, TA = 25°C, unless otherwise noted.)

			MC3458			MC3358
Characteristic	Symbol							Unit
		Min	Typ	Max	Min	Typ	Max
Input Offset Voltage	VIO	±	2.0	5.0	±	2.0	10	mV
Input Offset Current	IIO	±	30	50	±	±	75	nA
Input Bias Current	IIB	±	±200	±500	±	±	±500	nA
Large Signal Open Loop Voltage Gain	AVOL	20	200	±	20	200	±	V/mV
RL = 2.0 kΩ,
Power Supply Rejection Ratio	PSRR	±	±	150	±	±	150	μV/V
Output Voltage Range (Note 3)	VOR							Vpp
RL = 10 kΩ, VCC = 5.0 V		3.3	3.5	±	3.3	3.5	±
RL = 10 kΩ, 5.0 V ≤ VCC ≤ 30 V		±	VCC	±	±	VCC	±
			±1.7			±1.7
Power Supply Current	ICC	±	2.5	7.0	±	2.5	4.0	mA
Channel Separation	CS	±	±120	±	±	±120	±	dB
f = 1.0 kHz to 20 kHz (Input Referenced)

NOTE: 3. Output will swing to ground with a 10 kΩ pull down resistor.

MOTOROLA ANALOG IC DEVICE DATA	3