Bluetooth Wireless Hands Free
Bluetooth Wireless
Hands Free
Car Kit
™
User's Guide >
Welcome
Welcome to Motorola’s “connected” world of Bluetooth™ personal area wireless
networking. The Motorola Bluetooth Wireless Hands Free Car Kit makes wireless
connection simple and quick.
The advanced, sophisticated Motorola Bluetooth Wireless Hands Free Car Kit offers these
features:
•
seamless, wireless hands-free audio through Bluetooth link
•
digital audio interface with high quality, full-duplex, hands free speech
•
Voice Recognition
•
voice user interface
•
entertainment mute—automatically mutes radio during calls
•
noise reduction and acoustic echo cancellation
•
automatic volume control
•
Ignition sense—continue an active call after car is turned off
•
compliance with Bluetooth Headset v1.1 and Bluetooth Hands Free 0.96 profile
Note:
There may be differences between the performances of the Bluetooth headset
profile and the Bluetooth Hands Free profile. See the “Using Your Car Kit” chapter for
details.
1
Personal Communications Sector
600 North U.S. Highway 45
Libertyville, Illinois 60048
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States)
1-800-461-4575 (Canada)
www.motorola.com
www.motorola.ca
MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of
Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. The Bluetooth trademarks are owned by their proprietor and used by
Motorola, Inc. under license. All other product or service names are the property of their respective owners.
© 2002 Motorola, Inc. All rights reserved. Printed in the U.S.A.
Manual number: 6889176G01-O
(United States)
(Canada)
2
Contents
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety and General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the Hands Free Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Guidelines for Installation and Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Using Your Car Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
The Control Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Linking Your Car Kit and Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Disconnecting the Car Kit from Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Training Your Car Kit’s Internal Voice Recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Placing a Call with the Car Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using Features While on a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Training Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Calling Features Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Motorola Limited Warranty for Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Total Customer Satisfaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Motorola’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3
Safety and General Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS
INFORMATION BEFORE USING YOUR PHONE.
Users are not permitted to make changes or modify the device in any way. Changes or
modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment. See 47 CFR Sec. 15.21
This device complies with part 15 of the FCC rules and with RSS-210 / RSS-139 of the
Industry Canada. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3).
Canada Compliance (Industry Canada)
To prevent radio interference to the licensed service, this device is intended to be operated indoors
and away from windows to provide maximum shielding. Equipment that is installed outdoors is
subject to licensing.
European Union (EU) and EFTA
This equipment complies with the R&TTE directive 1999/5/EC and has
been provided with the CE mark accordingly.
Electromagnetic Interference/Compatibility
Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately
shielded, designed, or otherwise configured for electromagnetic compatibility.
.
4
Installing the Hands Free Kit
Guidelines for Installation and Connection
•
Only qualified personnel should install this car kit. If necessary, contact with vehicle
manufacturer for air bag information specific to the vehicle.
Caution:
communication equipment, in the area over the air bag or in the air bag deployment area. If
the communication equipment is improperly installed and the air bag inflates, serious injury
could occur.
Installation Procedure
Caution:
prevent fire or other damages if a short circuit should occur somewhere in the Junction
Box.
Before installation, unpack, assemble, and test all components on a service bench.
An air bag inflates with great force. DO NOT place objects, including
•
Mount components securely on strong surfaces to prevent shifting that could cause
injury or interfere with safe vehicle operation. Always use the supplied mounting
hardware
•
Mounted components and attached wires or cables must not interfere with seating or
leg space.
•
Route cables so they are protected from pinching, sharp edges, and crushing. Keep
all in-line connectors easily accessible.
•
This car kit is intended for use in 12 volt negative ground systems only. The car kit
draws less than 3 amps. Confirm that the vehicle’s electrical system can supply this
current.
This car kit must be connected to a maximum 10A fuse in the car fuse panel to
Installing the Hands Free Kit
Installing the Bluetooth Junction Box
Mount the box using the screws provided.
The best location for the Bluetooth junction box is under the dash. The box must be
protected from dirt and moisture and have adequate space for cooling and to allow for
cable connection.
For optimal Bluetooth performance, mount the junction box so that the side with the
barcode faces away from the mounting surface.
5
The location MUST NOT interfere with the vehicle’s air bag deployment.
Installing the Power Cable and Fuse Kit
Caution:
may cause damage to the car kit.
Failure to follow these steps may cause the accessory not to work properly and
Speaker
(SSN4020)
Microphone
(SMN4103)
C
B
Control Module
Installing the Hands Free Kit
1
Remove all fuses and tape them to their respective holders. DO NOT re-insert fuses until
(SYN9698A)
Junction Box
(SYN8883A, SYN0415A,
SYN0416A, SYN0417A
Orange
Wire crimps:
green to green,
red to red,
black to black
Vehicle
Chassis
Black
Blue
Yellow
Green: to a point in
the fuse box
Red: to a point in fuse box
that is always active
4 - 10 AMP fuse
Power Cable
(SKN4834A)
Vehicle
Radio
Fuse Kit
(SKN4937A)
you complete and inspect all connections.
2
Connect the fuse kit’s
GREEN
Ignition Sense wire (3 amp fuse) to an ignition-switched
location on the fuse block. When the ignition is off, the ignition sense line is low.
3
Connect the power cable’s
ORANGE
Entertainment Mute Wire to the vehicle’s
entertainment system.
Note:
This feature is only operational if the car radio and/or phone support this capability.
Installation may require an optional relay (not included).
4
Connect the fuse kit’s
RED
positive primary lead (4 amp fuse) to a point in the vehicle’s
fuse box that is fused at 4 to 10 amp.
5
Connect the fuse kit’s
6
Inspect all connections.
Note:
The Yellow and Blue wires are not used.
7
Re-insert all fuses. Do not replace any fuse with a higher amperage fuse.
BLACK
ground wire to the vehicle chassis.
Installing the Microphone
Note:
Always use the supplied mounting hardware.
6
Loading...