Fairchild Semiconductor 74ACT02SJX, 74ACT02SJ, 74ACT02SCX, 74ACT02SC, 74ACT02PC Datasheet
...
|
November 1988 |
|
Revised November 1999 |
74AC02•74ACT02 |
|
Quad 2-Input NOR Gate |
|
General Description |
Features |
The AC02/ACT02 contains four, 2-input NOR gates. |
■ ICC reduced by 50% on 74AC02 only |
|
■ Outputs source/sink 24 mA |
|
■ ACT02 has TTL-compatible inputs |
Ordering Codes:
Order Number |
Package Number |
Package Description |
|
|
|
74AC02SC |
M14A |
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow Body |
|
|
|
74AC02SJ |
M14D |
14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide |
|
|
|
74AC02MTC |
MTC14 |
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide |
|
|
|
74AC02PC |
N14A |
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide |
|
|
|
74ACT02SC |
M14A |
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow Body |
|
|
|
74ACT02MTC |
MTC14 |
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide |
|
|
|
74ACT02PC |
N14A |
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide |
|
|
|
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. (PC not available in Tapeand Reel.)
Logic Symbol |
Connection Diagram |
|
IEEE/IEC |
Pin Descriptions
|
Pin Names |
Description |
|
|
|
|
|
|
An, Bn |
Inputs |
|
|
|
Outputs |
|
|
O |
n |
|
FACT is a trademark of Fairchild Semiconductor Corporation.
Gate NOR Input-2 Quad 74AC02•74ACT02
© 1999 Fairchild Semiconductor Corporation |
DS009912 |
www.fairchildsemi.com |
74AC02•74ACT02
Absolute Maximum Ratings(Note 1)
Supply Voltage (VCC) |
− 0.5V to + 7.0V |
|
DC Input Diode Current (IIK) |
|
|
VI = |
− 0.5V |
− 20 mA |
VI = |
VCC + 0.5V |
+ 20 mA |
DC Input Voltage (VI) |
− 0.5V to VCC + 0.5V |
|
DC Output Diode Current (IOK) |
|
|
VO = |
− 0.5V |
− 20 mA |
VO = |
VCC + 0.5V |
+ 20 mA |
DC Output Voltage (VO) |
− 0.5V to VCC + 0.5V |
|
DC Output Source or |
|
|
Sink Current (IO) |
± 50 mA |
|
DC VCC or Ground Current per |
|
|
Output Pin (ICC or IGND) |
± 50 mA |
|
Storage Temperature (TSTG) |
− 65° C to + 150° C |
|
Junction Temperature (TJ) |
|
|
PDIP |
140° C |
|
Recommended Operating
Conditions
Supply Voltage (VCC) |
|
AC |
2.0V to 6.0V |
ACT |
4.5V to 5.5V |
Input Voltage (VI) |
0V to VCC |
Output Voltage (VO) |
0V to VCC |
Operating Temperature (TA) |
− 40° C to + 85° C |
Minimum Input Edge Rate (∆ V/∆ t) |
|
AC Devices |
|
VIN from 30% to 70% of VCC |
|
VCC @ 3.3V, 4.5V, 5.5V |
125 mV/ns |
Minimum Input Edge Rate (∆ V/∆ t) |
|
ACT Devices |
|
VIN from 0.8V to 2.0V |
|
VCC @ 4.5V, 5.5V |
125 mV/ns |
Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of FACT circuits outside databook specifications.
DC Electrical Characteristics for AC
Symbol |
Parameter |
VCC |
TA = + 25° C |
|
TA = − 40° C to + 85° C |
Units |
|
Conditions |
|||
|
|
(V) |
Typ |
|
Guaranteed Limits |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
VIH |
Minimum HIGH Level |
3.0 |
1.5 |
2.1 |
|
2.1 |
|
VOUT = |
0.1V |
||
|
Input Voltage |
4.5 |
2.25 |
3.15 |
|
3.15 |
V |
or VCC − |
0.1V |
||
|
|
5.5 |
2.75 |
3.85 |
|
3.85 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
VIL |
Maximum LOW Level |
3.0 |
1.5 |
0.9 |
|
0.9 |
|
VOUT = |
0.1V |
||
|
Input Voltage |
4.5 |
2.25 |
1.35 |
|
1.35 |
V |
or VCC − |
0.1V |
||
|
|
5.5 |
2.75 |
1.65 |
|
1.65 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VOH |
Minimum HIGH Level |
3.0 |
2.99 |
2.9 |
|
2.9 |
|
|
|
|
|
|
Output Voltage |
4.5 |
4.49 |
4.4 |
|
4.4 |
V |
IOUT = |
− |
50 µ A |
|
|
|
5.5 |
5.49 |
5.4 |
|
5.4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
VIN = |
VIL or VIH |
||
|
|
3.0 |
|
2.56 |
|
2.46 |
V |
IOH = |
− |
12 mA |
|
|
|
4.5 |
|
3.86 |
|
3.76 |
IOH = |
− |
24 mA |
||
|
|
|
|
|
|||||||
|
|
5.5 |
|
4.86 |
|
4.76 |
|
IOH = |
− 24 mA (Note 2) |
||
VOL |
Maximum LOW Level |
3.0 |
0.002 |
0.1 |
|
0.1 |
|
|
|
|
|
|
Output Voltage |
4.5 |
0.001 |
0.1 |
|
0.1 |
V |
IOUT = |
50 µ A |
||
|
|
5.5 |
0.001 |
0.1 |
|
0.1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
VIN = |
VIL or VIH |
||
|
|
3.0 |
|
0.36 |
|
0.44 |
|
IOL = |
12 mA |
||
|
|
4.5 |
|
0.36 |
|
0.44 |
V |
IOL = |
24 mA |
||
|
|
5.5 |
|
0.36 |
|
0.44 |
|
IOL = |
24 mA (Note 2) |
||
IIN (Note 4) |
Maximum Input Leakage Current |
5.5 |
|
± 0.1 |
|
± 1.0 |
µ A |
VI = |
VCC, GND |
||
IOLD |
Minimum Dynamic |
5.5 |
|
|
|
75 |
mA |
VOLD = |
1.65V Max |
||
IOHD |
Output Current (Note 3) |
5.5 |
|
|
|
− 75 |
mA |
VOHD = |
|
3.85V Min |
|
ICC |
Maximum Quiescent |
5.5 |
|
2.0 |
|
20.0 |
µ A |
VIN = |
VCC |
||
(Note 4) |
Supply Current |
|
|
or GND |
|
||||||
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
Note 2: All outputs loaded; thresholds on input associated with output under test.
Note 3: Maximum test duration 2.0 ms, one output loaded at a time.
Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC.
www.fairchildsemi.com |
2 |
DC Electrical Characteristics for ACT
Symbol |
Parameter |
VCC |
|
TA = + 25° C |
|
TA = − 40° C to + 85° C |
Units |
|
|
Conditions |
|
|
|
(V) |
Typ |
|
Guaranteed Limits |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
||
VIH |
Minimum HIGH Level |
4.5 |
|
1.5 |
2.0 |
|
2.0 |
V |
VOUT = |
0.1V or |
|
|
Input Voltage |
5.5 |
|
1.5 |
2.0 |
|
2.0 |
VCC − |
0.1V |
||
|
|
|
|
||||||||
VIL |
Maximum LOW Level |
4.5 |
|
1.5 |
0.8 |
|
0.8 |
V |
VOUT = |
0.1V or |
|
|
Input Voltage |
5.5 |
|
1.5 |
0.8 |
|
0.8 |
VCC − |
0.1V |
||
|
|
|
|
||||||||
VOH |
Minimum HIGH Level |
4.5 |
|
4.49 |
4.4 |
|
4.4 |
V |
IOUT = |
− 50 µ A |
|
|
Output Voltage |
5.5 |
|
5.49 |
5.4 |
|
5.4 |
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VIN = |
VIL or VIH |
|
|
|
4.5 |
|
|
3.86 |
|
3.76 |
V |
IOH = |
− |
24 mA |
|
|
5.5 |
|
|
4.86 |
|
4.76 |
IOH = |
− 24 mA (Note 5) |
||
|
|
|
|
|
|
||||||
VOL |
Maximum LOW Level |
4.5 |
|
0.001 |
0.1 |
|
0.1 |
V |
IOUT = |
50 µ A |
|
|
Output Voltage |
5.5 |
|
0.001 |
0.1 |
|
0.1 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VIN = |
VIL or VIH |
|
|
|
4.5 |
|
|
0.36 |
|
0.44 |
V |
IOL= |
24 mA |
|
|
|
5.5 |
|
|
0.36 |
|
0.44 |
IOL= |
24 mA (Note 5) |
||
|
|
|
|
|
|
||||||
IIN |
Maximum Input |
5.5 |
|
|
± 0.1 |
|
± 1.0 |
µ A |
VI = |
VCC, GND |
|
|
Leakage Current |
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ICCT |
Maximum ICC/Input |
5.5 |
|
0.6 |
|
|
1.5 |
mA |
VI = |
VCC − 2.1V |
|
IOLD |
Minimum Dynamic |
5.5 |
|
|
|
|
75 |
mA |
VOLD = |
1.65V Max |
|
IOHD |
Output Current (Note 6) |
5.5 |
|
|
|
|
− 75 |
mA |
VOHD = 3.85V Min |
||
ICC |
Maximum Quiescent |
5.5 |
|
|
4.0 |
|
40.0 |
µ A |
VIN = |
VCC or GND |
|
|
Supply Current |
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note 5: All outputs loaded; thresholds on input associated with output under test.
Note 6: Maximum test duration 2.0 ms, one output loaded at a time.
AC Electrical Characteristics for AC
|
|
|
VCC |
|
TA = + 25° C |
|
TA = − 40° C to + 85° C |
|
|
Symbol |
Parameter |
(V) |
|
CL = 50 pF |
|
CL = |
50 pF |
Units |
|
|
|
|
(Note 7) |
Min |
Typ |
Max |
Min |
Max |
|
|
|
|
|
|
|
|
|
|
|
tPLH |
Propagation Delay |
|
3.3 |
1.5 |
5.0 |
7.5 |
1.0 |
8.0 |
ns |
|
|
|
5.0 |
1.5 |
4.0 |
6.0 |
1.0 |
6.5 |
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
tPHL |
Propagation Delay |
|
3.3 |
1.5 |
5.0 |
7.5 |
1.0 |
8.0 |
ns |
|
|
|
5.0 |
1.5 |
4.5 |
6.5 |
1.0 |
7.0 |
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
Note 7: Voltage Range 3.3 is 3.3V ± |
0.3V |
|
|
|
|
|
|
|
|
Voltage Range 5.0 is 5.0V ± |
0.5V |
|
|
|
|
|
|
|
|
AC Electrical Characteristics for ACT
|
|
VCC |
|
TA = + 25° C |
|
TA = − 40° C to + 85° C |
|
|
Symbol |
Parameter |
(V) |
|
CL = 50 pF |
|
CL = |
50 pF |
Units |
|
|
(Note 8) |
Min |
Typ |
Max |
Min |
Max |
|
|
|
|
|
|
|
|
|
|
tPLH |
Propagation Delay |
5.0 |
1.0 |
6.0 |
8.5 |
1.0 |
9.0 |
ns |
tPHL |
Propagation Delay |
5.0 |
1.0 |
6.5 |
9.5 |
1.0 |
10.0 |
ns |
Note 8: Voltage Range 5.0 is 5.0V ± 0.5V
Capacitance
Symbol |
Parameter |
Typ |
Units |
|
Conditions |
|
|
|
|
|
|
CIN |
Input Capacitance |
4.5 |
pF |
VCC = |
OPEN |
CPD |
Power Dissipation Capacitance |
30.0 |
pF |
VCC = |
5.0V |
74AC02•74ACT02
3 |
www.fairchildsemi.com |
Loading...