Livarno Z29526A User Manual

Download

DOOR HANDLE SET

Assembly and safety advice

Z29526A Z29526B

GB Assembly and safety advice Page 3

Table of Contents

Introduction

Proper Use .........................................................................................................................Page 4

Description of parts ...........................................................................................................Page 4

Technical data ...................................................................................................................Page 5

Supply Scope ....................................................................................................................Page 5

Safety advice .............................................................................................................Page 5

Assembly ....................................................................................................................... Page 7

Cleaning and Care ................................................................................................. Page 8

Disposal .......................................................................................................................... Page 8

3 GB

Introduction

Door handle set

Introduction

Familiarise yourself with the product prior to assembly. Carefully read the following assembly instructions and safety tips. Only use the product as instructed and only for the indicated ﬁeld of application. Keep instructions in a safe place. Submit all

documents to a third party if distributing the product.

Proper Use

The product is designed for opening and closing doors. The door handle set is intended only for private use indoors. Any use other than that described or any modiﬁcation of the product is not permissible and may result in injury and / or damage to the product. The manufacturer is not liable for damage caused by improper use. The product is not intended for commercial use.

Description of parts

Spindle

Lock rose 1

Lock rose 2

Lock rose cover

Door handle rose cover

Door handle rose 1

Door handle rose 2

Screw (approx. ø 4 x 19 mm)

Screw (approx. ø M4 x 53 mm)

Hexagon socket screw key

4 GB

Introduction / Safety advice

Technical data

Suitable door thicknesses: 38–43 mm Material: Stainless steel, zinc alloy

Supply Scope

Note: When you are unpacking the components make sure that you do not unintentionally

throw away any of the assembly materials.

Please check immediately on unpacking that the delivery is complete and that the product and all parts are in perfect condition. Do not under any circumstances assemble the product if the delivery is incomplete.

1 x Spindle 1 x Lock rose 1 1 x Lock rose 2 2 x Lock rose cover 2 x Door handle rose cover 1 x Door handle rose 1 1 x Door handle rose 2 2 x Screw (approx. ø 4 x 19 mm) 4 x Screw (approx. ø M4 x 53 mm) 1 x Hexagon socket screw key 1 x Assembly instructions

Safety advice

KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

5 GB

Safety advice

Avoid danger to life and injury!

DANGER OF LOSS OF LIFE AND ACCIDENT TO

INFANTS AND CHILDREN! Never leave children unsupervised with the packaging materials. Danger of suﬀocation. Keep out of the reach of children.

It is not a toy.

DANGER TO LIFE! During installation keep children away from the area

in which you are working. The scope of supply includes a number of screws and other

small parts. These may prove life-threatening if swallowed or inhaled.

CAUTION! DANGER OF INJURY! Please ensure that no parts are damaged and that

all parts are correctly assembled. Incorrect assembly or ﬁtting may lead to injury. Damaged parts can adversely aﬀect safety and proper function.

CAUTION! Do not leave children unattended. The product is not a climbing frame or toy.

Make sure that nobody, especially a child, lifts themselves up by the product. This may

result in injury and / or damage. Make sure that the product is only assembled by competent persons. Please check the stability of the product before use. You should perform regular checks to ensure that all connections are intact and tighten the

screws at regular intervals.

Prevent damage to property!

Before assembly, check that the selected door is suitable for mounting the product to.

You may have to consult a specialist. Before assembly, ﬁnd out about suitable assembly material for your door. For the purposes

of the assembly, we have included assembly material that is suitable for conventional doors.

6 GB

Assembly

Push the spindle 1 through the follower (see Fig. A).

Note: Please note that the recess in the spindle must point downwards.

Push the drilling template over the spindle 1 and align it vertically (see Fig. B).

Note: Make sure that you use the correct drilling template for the model in question.

CAUTION! RISK OF INJURY! Consult the directions for use that came with your drill.

Now drill the holes for the supporting cams at the places marked. Repeat this step on the other side of the door. Remove the cover of the door handle rose 5 by turning the lever rose anticlockwise.

Insert the screws Now push the door handle roses 6, 7 over the spindle 1 (see Fig. C). Using a crosshead screwdriver, turn the screws 9 into the larger holes of the door handle

rose

(see Fig. C).

Note: the following working step applies for alternative mounting options only.

Remove the cover of the lock rose 4 by turning the lock rose 2, 3 anticlockwise. Secure the door handle roses 6, 7 into position by tightening the screws 8 using a

crosshead screwdriver (see Fig. C). Using a crosshead screwdriver, turn the screws 9 into the larger holes of the lock rose 3

so that the two lock roses

Note: the following working step applies for alternative mounting options only.

Place the covers 5 onto the door handle roses 6, 7 (see Fig. D). Place the covers 4 onto the lock roses 2, 3 (see Fig. D).

Note: Ensure that the lever is placed the right way round.

Tighten the set screw on the underside of the lever using the hexagon socket screw key 10

(see Fig. E).

so that that the two door handle roses 6, 7 are connected to each other

through the prebored holes in the lever rose 6 (see Fig. C).

2, 3

are connected to each other (see Fig. C).

Note: Regularly check that all joints are intact and regularly re-tighten all screws.