December 1986
Revised February 2000
DM7407
Hex Buffers with High Voltage Open-Collector Outputs
General Description |
Pull-Up Resistor Equations |
This device contains six independent gates each of which performs a buffer function. The open-collector outputs require external pull-up resistors for proper logical operation.
Where:
N1 (IOH) = total maximum output high current for all outputs tied to pull-up resistor
N2 (IIH) = total maximum input high current for all inputs tied to pull-up resistor
N3 (IIL) = total maximum input low current for all inputs tied to pull-up resistor
Ordering Code:
Order Number |
Package Number |
Package Description |
|
|
|
DM7407M |
M14A |
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow |
|
|
|
DM7407N |
N14A |
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide |
|
|
|
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram |
Function Table |
|
|
|
|
|
|
Y = A |
|
|
|
|
|
|
|
|
Input |
|
Output |
|
|
|
|
|
|
|
A |
|
Y |
|
|
|
|
|
|
|
L |
|
L |
|
|
H |
|
H |
|
|
|
|
|
|
H = HIGH Logic Level |
|
|
|
|
L = LOW Logic Level |
|
|
|
Outputs Collector-Open Voltage High with Buffers Hex DM7407
© 2000 Fairchild Semiconductor Corporation |
DS006497 |
www.fairchildsemi.com |
DM7407
Absolute Maximum Ratings(Note 1)
Supply Voltage |
7V |
Input Voltage |
5.5V |
Output Voltage |
30V |
Operating Free Air Temperature Range |
0°C to +70°C |
Storage Temperature Range |
−65°C to +150°C |
Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.
Recommended Operating Conditions
Symbol |
Parameter |
Min |
Nom |
Max |
Units |
|
|
|
|
|
|
VCC |
Supply Voltage |
4.75 |
5 |
5.25 |
V |
VIH |
High Level Input Voltage |
2 |
|
|
V |
VIL |
Low Level Input Voltage |
|
|
0.8 |
V |
VOH |
High Level Output Voltage |
|
|
30 |
V |
IOL |
Low Level Output Current |
|
|
40 |
mA |
TA |
Free Air Operating Temperature |
0 |
|
70 |
°C |
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)
Symbol |
Parameter |
Conditions |
Min |
Typ |
Max |
Units |
|
(Note 2) |
|||||||
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
VI |
Input Clamp Voltage |
VCC = Min, II = −12 mA |
|
|
−1.5 |
V |
|
ICEX |
HIGH Level |
VCC = Min, VO = 30V |
|
|
250 |
μA |
|
|
Output Current |
VIH = Min |
|
|
|||
|
|
|
|
|
|||
VOL |
LOW Level |
VCC = Min, IOL = Max |
|
|
0.7 |
|
|
|
Output Voltage |
VIL = Max |
|
|
V |
||
|
|
|
|
||||
|
|
IOL = 16 mA, VCC = Min |
|
|
0.4 |
|
|
II |
Input Current @ Max Input Voltage |
VCC = Max, VI = 5.5V |
|
|
1 |
mA |
|
IIH |
HIGH Level Input Current |
VCC = Max, VI = 2.4V |
|
|
40 |
μA |
|
IIL |
LOW Level Input Current |
VCC = Max, VI = 0.4V |
|
|
−1.6 |
mA |
|
ICCH |
Supply Current with Outputs HIGH |
VCC = Max |
|
29 |
41 |
mA |
|
ICCL |
Supply Current with Outputs LOW |
VCC = Max |
|
21 |
30 |
mA |
Note 2: All typicals are at VCC = 5V, TA = 25°C.
Switching Characteristics
at VCC = 5V and TA = 25°C
Symbol |
Parameter |
Conditions |
Min |
Max |
Units |
|
|
|
|
|
|
tPLH |
Propagation Delay Time |
CL = 15 pF |
|
10 |
ns |
|
LOW-to-HIGH Level Output |
RL = 110Ω |
|
||
|
|
|
|
||
tPHL |
Propagation Delay Time |
|
|
30 |
ns |
|
HIGH-to-LOW Level Output |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
www.fairchildsemi.com |
2 |
Loading...