Fairchild Semiconductor DM74ALS10ASJX, DM74ALS10ASJ, DM74ALS10AN, DM74ALS10AMX, DM74ALS10AM Datasheet

September 1986

Revised February 2000

DM74ALS10A

Triple 3-Input NAND Gate

General Description			Features
This device contains three independent gates, each of			■ Switching specifications at 50 pF
which performs the logic NAND function.			■ Switching specifications guaranteed over full tempera-
			ture and VCC range
			■ Advanced oxide-isolated, ion-implanted Schottky TTL
			process
			■ Functionally and pin for pin compatible with Schottky
			and low power Schottky TTL counterpart
			■ Improved AC performance over Schottky and low power
			Schottky counterparts
Ordering Code:
Order Number	Package Number		Package Description
DM74ALS10AM	M14A	14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
DM74ALS10ASJ	M14D	14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
DM74ALS10AN	N14A	14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide

Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Connection Diagram	Function Table
				Y =	ABC
				Inputs				Output
		A		B			C	Y
		X		X			L	H
		X		L			X	H
		L		X			X	H
		H		H			H	L
	H = HIGH Logic Level
	L = LOW Logic Level
	X = Either LOW or HIGH Logic Level

Gate NAND Input-3 Triple DM74ALS10A

© 2000 Fairchild Semiconductor Corporation

DS006180

www.fairchildsemi.com

DM74ALS10A

Absolute Maximum Ratings(Note 1)

Supply Voltage	7V
Input Voltage	7V
Operating Free Air Temperature Range	0°C to +70°C
Storage Temperature Range	−65°C to +150°C
Typical θJA
N Package	86.5°C/W
M Package	116.0°C/W

Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.

Recommended Operating Conditions

Symbol	Parameter	Min	Nom	Max	Units
VCC	Supply Voltage	4.5	5	5.5	V
VIH	HIGH Level Input Voltage	2			V
VIL	LOW Level Input Voltage			0.8	V
IOH	HIGH Level Output Current			−0.4	mA
IOL	LOW Level Output Current			8	mA
TA	Free Air Operating Temperature	0		70	°C

Electrical Characteristics

over recommended operating free air temperature range. All typical values are measured at VCC = 5V, TA = 25°C.

Symbol	Parameter	Conditions		Min	Typ	Max	Units
VIK	Input Clamp Voltage	VCC = 4.5V, II = −18 mA				−1.5	V
VOH	HIGH Level	IOH = −0.4 mA		VCC − 2			V
	Output Voltage	VCC = 4.5V to 5.5V
VOL	LOW Level	VCC = 4.5V	IOL = 4 mA		0.25	0.4	V
	Output Voltage		IOL = 8 mA		0.35	0.5	V
II	Input Current @ Max	VCC = 5.5V, VIH = 7V				0.1	mA
	Input Voltage
IIH	HIGH Level Input Current	VCC = 5.5V, VIH = 2.7V				20	μA
IIL	LOW Level Input Current	VCC = 5.5V, VIL = 0.4V				−0.1	mA
IO	Output Drive Current	VCC = 5.5V	VO = 2.25V	−30		−112	mA
ICC	Supply Current	VCC = 5.5V	Outputs HIGH		0.32	0.6	mA
			Outputs LOW		1.7	2.4	mA

Switching Characteristics

over recommended operating free air temperature range.

Symbol	Parameter	Conditions	Min	Max	Units
tPLH	Propagation Delay Time	VCC = 4.5V to 5.5V	2	11	ns
	LOW-to-HIGH Level Output	RL = 500Ω
tPHL	Propagation Delay Time	CL = 50 pF	2	10	ns
	HIGH-to-LOW Level Output

www.fairchildsemi.com

2