May 1991
Revised November 1999
100316
Low Power Quad Differential Line Driver with Cut-Off
General Description
The 100316 is a quad differential line driver with output cutoff capability. The outputs are designed to drive a doubly terminated 50Ω transmission line (25Ω equivalent impedance) in an ECL backplane. The 100316 is ideal for driving low noise, differential ECL backplanes. A LOW on the output enable (OE) will set both the true and complementary outputs into a high impedance or cut-off state, isolating them from the backplane. The cut-off state is designed to be more negative than a normal ECL LOW state.
Unlike most 100K devices, the data inputs (Dn, Dn) do not have input pull-down resistors. An internal reference supply (VBB) is available for single-ended operation.
Features
■Differential inputs and outputs
■Output cut-off capability
■Drives 25Ω load
■VBB available for single-ended operation
■2000V ESD protection
■Voltage compensated operating range = − 4.2V to − 5.7V
■Available to industrial grade temperature range
Ordering Code:
Order Number |
Package Number |
Package Description |
|
|
|
100316QC |
V28A |
28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square |
|
|
|
100316QI |
V28A |
28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square |
|
|
Industrial Temperature Range (− 40° C to + 85° C) |
|
|
|
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Symbol |
Connection Diagram |
|
28-Pin PLCC |
Pin Descriptions
Pin Names |
Description |
||
|
|
|
|
|
Dn |
Data Inputs |
|
|
Qn |
Data Outputs |
|
|
Q |
n |
Complementary Data Outputs |
OE |
Output Enable |
||
|
|
|
|
Off-Cut with Driver Line Differential Quad Power Low 100316
© 1999 Fairchild Semiconductor Corporation |
DS010922 |
www.fairchildsemi.com |
100316
Truth Table |
|
|
|
|
|
Logic Diagram |
||||
|
|
|
|
|
|
|||||
|
|
Inputs |
|
Outputs |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dn |
|
Dn |
OE |
Qn |
|
Qn |
|
||
|
L |
|
H |
H |
L |
|
H |
|
||
|
H |
|
L |
H |
H |
|
L |
|
||
|
X |
|
X |
L |
Cut-Off |
Cut-Off |
|
|||
|
|
|
|
|
|
|
|
|
|
|
H = HIGH Voltage Level
L = LOW Voltage Level
X = Don’t Care
Cut-Off = Lower-than-LOW State
www.fairchildsemi.com |
2 |