Philips Semiconductors RF Communications Products |
Product specification |
|
|
|
|
Video amplifier |
NE592 |
|
|
|
|
The NE592 is a monolithic, two-stage, differential output, wideband video amplifier. It offers fixed gains of 100 and 400 without external components and adjustable gains from 400 to 0 with one external resistor. The input stage has been designed so that with the addition of a few external reactive elements between the gain select terminals, the circuit can function as a high-pass, low-pass, or band-pass filter. This feature makes the circuit ideal for use as a video or pulse amplifier in communications, magnetic memories, display, video recorder systems, and floppy disk head amplifiers. Now available in an 8-pin version with fixed gain of 400 without external components and adjustable gain from 400 to 0 with one external resistor.
•120MHz unity gain bandwidth
•Adjustable gains from 0 to 400
•Adjustable pass band
•No frequency compensation required
•Wave shaping with minimal external components
•MIL-STD processing available
|
|
D, N Packages |
|
|||
|
|
|
|
|
|
|
INPUT 2 |
1 |
|
|
|
14 |
INPUT 1 |
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NC |
2 |
|
|
|
13 |
NC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
G2B GAIN SELECT |
3 |
|
|
|
12 |
G2A GAIN SELECT |
|
|
|
|
|
||
|
|
|
|
|
|
|
G1B GAIN SELECT |
4 |
|
|
|
11 |
G1A GAIN SELECT |
|
|
|
|
|
||
|
|
|
|
|
|
|
V- |
5 |
|
|
|
10 |
V+ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NC |
6 |
|
|
|
9 |
NC |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OUTPUT 2 |
7 |
|
|
|
8 |
OUTPUT 1 |
|
|
|
|
|
|
|
TOP VIEW
|
|
D, N Packages |
|
INPUT 2 |
1 |
8 |
INPUT 1 |
G1B GAIN SELECT |
2 |
7 |
G1A GAIN SELECT |
V- |
3 |
6 |
V+ |
OUTPUT 2 |
4 |
5 |
OUTPUT 1 |
|
|
TOP VIEW |
|
|
|
|
|
|
|
APPLICATIONS |
|
|
|
|
|
|
|
|
•Floppy disk head amplifier |
||
|
|
|
|
|
|
•Video amplifier |
|
|
|
|
|
|
|
|
•Pulse amplifier in communications |
||
|
|
|
|
|
|
•Magnetic memory |
|
|
|
|
|
|
|
|
•Video recorder systems |
|
|
BLOCK DIAGRAM |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+V |
|
R1 |
|
R2 |
R8 |
R10 |
R9 |
|
|
|
|
|
|
|
|
|
|
Q6 |
|
|
|
|
|
|
Q5 |
|
|
|
|
|
|
|
Q4 |
Q3 |
|
|
|
|
|
|
|
|
R11 |
|
|
|
|
|
|
|
|
|
|
OUTPUT 1 |
|
|
|
INPUT 2 |
|
|
|
|
|
INPUT 1 |
Q1 |
Q2 |
|
|
|
|
|
|
G1A |
|
|
G1B |
|
|
R12 |
|
OUTPUT 2 |
|
|
|
|
|
|
|
||
|
R3 |
|
R5 |
|
|
|
|
|
G2A |
|
|
G2B |
|
|
|
|
|
|
|
Q7B |
Q8 |
|
|
Q9 |
Q10 |
Q11 |
Q7A |
|
|
|
|
|
|
|
|
|
R7A |
R7B |
R15 |
|
R16 |
R13 |
R14 |
|
|
|
|
|
|
|
|
|
-V |
April 15, 1992 |
|
|
|
|
250 |
|
|
853-0911 06456 |
Philips Semiconductors RF Communications Products |
Product specification |
|
|
|
|
Video amplifier |
NE592 |
|
|
|
|
DESCRIPTION |
TEMPERATURE RANGE |
ORDER CODE |
DWG # |
|
|
|
|
14-Pin Plastic Dual In-Line Package (DIP) |
0 to +70°C |
NE592N14 |
0405B |
|
|
|
|
14-Pin Small Outline (SO) package |
0 to +70°C |
NE592D14 |
0175D |
|
|
|
|
8-Pin Plastic Dual In-Line Package (DIP) |
0 to +70°C |
NE592N8 |
0404B |
|
|
|
|
8-Pin Small Outline (SO) package |
0 to +70°C |
NE592D8 |
0174C |
NOTES: |
|
|
|
N8, N14, D8 and D14 package parts also available in ªHighº gain version by adding ªHº before package designation, i.e., NE592HDB
TA=+25°C, unless otherwise specified.
SYMBOL |
PARAMETER |
RATING |
UNIT |
|
|
|
|
VCC |
Supply voltage |
±8 |
V |
VIN |
Differential input voltage |
±5 |
V |
VCM |
Common-mode input voltage |
±6 |
V |
IOUT |
Output current |
10 |
mA |
TA |
Operating ambient temperature range |
0 to +70 |
°C |
TSTG |
Storage temperature range |
-65 to +150 |
°C |
PD MAX |
Maximum power dissipation, |
|
|
|
TA=25°C (still air)1 |
|
|
|
D-14 package |
0.98 |
W |
|
D-8 package |
0.79 |
W |
|
N-14 package |
1.44 |
W |
|
N-8 package |
1.17 |
W |
NOTES:
1. Derate above 25°C at the following rates:
D-14 package at 7.8mW/°C
D-8 package at 6.3mW/°C
N-14 package at 11.5mW/°C
N-8 package at 9.3mW/°C
April 15, 1992 |
251 |
Philips Semiconductors RF Communications Products |
Product specification |
|
|
|
|
Video amplifier |
NE592 |
|
|
|
|
TA=+25°C VSS=±6V, VCM=0, unless otherwise specified. Recommended operating supply voltages VS=±6.0V. All specifications apply to both standard and high gain parts unless noted differently.
SYMBOL |
PARAMETER |
TEST CONDITIONS |
|
NE592 |
|
UNIT |
||||||
|
|
|
||||||||||
Min |
Typ |
Max |
||||||||||
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
AVOL |
Differential voltage gain, |
|
|
|
|
|
|
|
|
|
|
|
|
standard part |
|
|
|
|
|
|
|
|
|
|
|
|
Gain 11 |
R |
=2kΩ, V |
=3V |
250 |
400 |
600 |
V/V |
||||
|
|
L |
|
|
|
OUT |
P-P |
|
|
|
|
|
|
Gain 22, 4 |
|
|
|
|
|
|
80 |
100 |
120 |
V/V |
|
RIN |
Input resistance |
|
|
|
|
|
|
|
|
|
|
|
|
Gain 11 |
|
|
|
|
|
|
|
4.0 |
|
kΩ |
|
|
Gain 22, 4 |
|
|
|
|
|
|
10 |
30 |
|
kΩ |
|
CIN |
Input capacitance2 |
|
|
|
|
Gain 24 |
|
2.0 |
|
pF |
||
IOS |
Input offset current |
|
|
|
|
|
|
|
0.4 |
5.0 |
μA |
|
IBIAS |
Input bias current |
|
|
|
|
|
|
|
9.0 |
30 |
μA |
|
VNOISE |
Input noise voltage |
BW 1kHz to 10MHz |
|
12 |
|
μVRMS |
||||||
VIN |
Input voltage range |
|
|
|
|
|
|
±1.0 |
|
|
V |
|
CMRR |
Common-mode rejection ratio |
|
|
|
|
|
|
|
|
|
|
|
|
Gain 24 |
V |
|
±1V, f<100kHz |
60 |
86 |
|
dB |
||||
|
|
|
CM |
|
|
|
|
|
|
|
||
|
Gain 24 |
V |
CM |
±1V, f=5MHz |
|
60 |
|
dB |
||||
|
|
|
|
|
|
|
|
|
|
|||
PSRR |
Supply voltage rejection ratio |
|
|
|
|
|
|
|
|
|
|
|
|
Gain 24 |
|
|
|
|
V =±0.5V |
50 |
70 |
|
dB |
||
|
|
|
|
|
|
S |
|
|
|
|
|
|
VOS |
Output offset voltage |
|
|
|
|
|
|
|
|
|
|
|
|
Gain 1 |
|
|
|
|
RL=∞ |
|
|
|
1.5 |
V |
|
|
Gain 24 |
|
|
|
|
RL=∞ |
|
|
|
1.5 |
V |
|
|
Gain 33 |
|
|
|
|
RL=∞ |
|
|
0.35 |
0.75 |
V |
|
VCM |
Output common-mode voltage |
|
|
|
|
RL=∞ |
|
2.4 |
2.9 |
3.4 |
V |
|
VOUT |
Output voltage swing |
|
|
|
|
RL=2kΩ |
3.0 |
4.0 |
|
V |
||
|
differential |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ROUT |
Output resistance |
|
|
|
|
|
|
|
20 |
|
Ω |
|
ICC |
Power supply current |
|
|
|
|
RL=∞ |
|
|
18 |
24 |
mA |
NOTES:
1.Gain select Pins G1A and G1B connected together.
2.Gain select Pins G2A and G2B connected together.
3.All gain select pins open.
4.Applies to 14-pin version only.
April 15, 1992 |
252 |