Philips NE4558D, NE4558N, SA4558D, SA4558FE, SA4558N Datasheet

Philips Semiconductors Linear Products	Product specification
Dual general-purpose operational amplifier	NE/SA/SE4558

DESCRIPTION

The 4558 is a dual operational amplifier that is internally compensated. Excellent channel separation allows the use of a dual device in a single amp application, providing the highest packaging density. The NE/SA/SE4558 is a pin-for-pin replacement for the RC/RM/RV4558.

FEATURES

•2MHz unity gain bandwidth guaranteed

•Supply voltage ±22V for SE4558 and ±18V for NE4558

•Short-circuit protection

•No frequency compensation required

•No latch-up

•Large common-mode and differential voltage ranges

•Low power consumption

PIN CONFIGURATIONS

D and N Packages

AOUT	1			8	V+
AIN±	2	A		7	BOUT
		± +
AIN+	3		B	6	BIN±
			+ ±
V±	4			5	BIN+

ORDERING INFORMATION

DESCRIPTION	TEMPERATURE RANGE	ORDER CODE	DWG #
8-Pin Plastic Small Outline (SO) Package	0 to +70°C	NE4558D	0174C
8-Pin Plastic Dual In-Line Package (DIP)	0 to +70°C	NE4558N	0404B
8-Pin Plastic Dual In-Line Package (DIP)	-40 to +85°C	SA4558N	0404B
8-Pin Plastic Dual In-Line Package (DIP)	-40 to +85°C	SA4558D	0404B
8-Pin Plastic Dual In-Line Package (DIP)	-55 to +125°C	SE4558N	0404B

EQUIVALENT SCHEMATIC

8	v+
	±
2(6)	OUYPUT 1(7)
	INPUTS
3(5)	+
4	V±

August 31, 1994

65

853-0840 13721

Philips Semiconductors Linear Products	Product specification
Dual general-purpose operational amplifier	NE/SA/SE4558

ABSOLUTE MAXIMUM RATINGS

SYMBOL	PARAMETER	RATING	UNIT
VCC	Supply voltage
	SE4558	±22	V
	NE4558, SA4558	±18	V
PD MAX	Maximum power dissipation,
	T =25°C (Still air)1
	A
	N package	1160	mW
	D package	780	mW
	Differential input voltage	±30	V
VIN	Input voltage2	±15	V
TSTG	Storage temperature range	-65 to +150	°C
TA	Operating ambient temperature range
	SE4558	-55 to +125	°C
	SA4558	-40 to +85	°C
	NE4558	0 to +70	°C
TSOLD	Lead soldering temperature (10sec max)	300	°C
	Output short-circuit duration3	Indefinite

NOTES:

1. Derate above 25°C at the following rates:

N package at 9.3mW/°C D package at 6.2mW/°C

2.For supply voltages less than ±15V, the absolute maximum input voltage is equal to the supply voltage.

3.Short-circuit may be to ground on one amp only. Rating applies to +125°C case temperature or +75°C ambient temperature for NE4558 and to +85°C ambient temperature for SA4558.

DC ELECTRICAL CHARACTERISTICS

VCC=+15V, TA= 25°C unless otherwise specified.

SYMBOL	PARAMETER	TEST CONDITIONS		SE4558			SA/NE4558			UNIT
			Min	Typ	Max	Min	Typ		Max
VOS	Input offset voltage	RS≤10kΩ		1.0	5.0		2.0		6.0	mV
	VOS/ T	Over temp.		4			4			μV/°C
IOS	Input offset current			50	200		30		200	nA
	IOS/ T	Over temp.		20			20			pA/°C
IBIAS	Input bias current			40	500		200		500	nA
	IB/ T	Over temp.		40			40			pA/°C
RIN	Input resistance		0.3	1.0		0.3	1.0			MΩ
AV	Large-signal voltage gain	RL≥ 2kΩ	50,00	300,0		20,00	300,0			V/V
		VOUT=±10V	0	00		0	00
	Output voltage swing	RL≥ 10kΩ	±12	±14		±12	±14			V
		RL≥ 2kΩ	±10	±13		±10	±13			V
VIN	Input voltage range		±12	±13		±12	±13			V
CMRR	Common-mode rejection ratio	RS≤10kΩ	70	100		70	100			dB
PSRR	Power supply rejection ratio	RS≤10kΩ		10	150		10		150	μV/V
ISC	Short-circuit current		5	25	60	5	25		60	mA
	Power consumption (all amplifiers)	RL=∞		120	170		120		170	mW

August 31, 1994

66