Philips NE5534AN, NE5534D, NE5534N, NE5534AD, NE5533N Datasheet

Philips Semiconductors Linear Products	Product specification

Dual and single low noise op amp

NE5533/5533A/

NE/SA/SE5534/5534A

DESCRIPTION

The 5533/5534 are dual and single high-performance low noise operational amplifiers. Compared to other operational amplifiers, such as TL083, they show better noise performance, improved output drive capability and considerably higher small-signal and power bandwidths.

This makes the devices especially suitable for application in high quality and professional audio equipment, in instrumentation and control circuits and telephone channel amplifiers. The op amps are internally compensated for gain equal to, or higher than, three. The frequency response can be optimized with an external compensation capacitor for various applications (unity gain amplifier, capacitive load, slew rate, low overshoot, etc.) If very low noise is of prime importance, it is recommended that the 5533A/5534A version be used which has guaranteed noise specifications.

FEATURES

•Small-signal bandwidth: 10MHz

•Output drive capability: 600Ω, 10VRMS at VS=±18V

•Input noise voltage: 4nV Hz

•DC voltage gain: 100000

•AC voltage gain: 6000 at 10kHz

•Power bandwidth: 200kHz

•Slew rate: 13V/μs

•Large supply voltage range: ±3 to ±20V

PIN CONFIGURATIONS

NE/SA/SE5534/5534A

		D, FE, N Packages
BALANCE												BALANCE/ COMPENSATION
	1	8
INVERTING INPUT												V+
	2				7
NON-INVERTING												OUTPUT
	3									6
V-												COMPENSATION
	4										5
					TOP VIEW

NE5533/5533A

N Package

INV INPUT A	1	14	BAL COMP A
NON±INV INPUT A	2	13	COMP A
BALANCE A	3	12	OUTPUT A
V±	4	11	V+
BALANCE B	5	10	OUTPUT B
NON±INV B	6	9	COMP B
INV B	7	8	BAL COMP B

TOP VIEW

APPLICATIONS

•Audio equipment

•Instrumentation and control circuits

•Telephone channel amplifiers

•Medical equipment

ORDERING INFORMATION

DESCRIPTION	TEMPERATURE RANGE	ORDER CODE	DWG #
14-Pin Plastic Dual In-Line Package (DIP)	0 to +70°C	NE5533N	0405B
14-Pin Plastic Dual In-Line Package (DIP)	0 to +70°C	NE5533AN	0405B
8-Pin Plastic Small Outline (SO) package	0 to +70°C	NE5534D	0174C
8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP)	0 to +70°C	NE5534FE
8-Pin Plastic Dual In-Line Package (DIP)	0 to +70°C	NE5534N	0404B
8-Pin Plastic Small Outline (SO) package	0 to +70°C	NE5534AD	0174C
8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP)	0 to +70°C	NE5534AF
8-Pin Plastic Dual In-Line Package (DIP)	0 to +70°C	NE5534AN	0404B
8-Pin Plastic Dual In-Line Package (DIP)	-40°C to +85°C	SA5534N	0404B
8-Pin Plastic Small Outline (SO) package	-40°C to +85°C	SA5534AD	0174C
8-Pin Plastic Dual In-Line Package (DIP)	-55°C to +125°C	SE5534N	0404B
8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP)	-55°C to +125°C	SE5534AF
8-Pin Plastic Dual In-Line Package (DIP)	-55°C to +125°C	SE5534AN	0404B
8-Pin Plastic Dual In-Line Package (DIP)	-40°C to +85°C	SA5534AN	0404B

August 31, 1994

114

853-0222 13721

Philips Semiconductors Linear Products	Product specification

Dual and single low noise op amp

NE5533/5533A/

NE/SA/SE5534/5534A

ABSOLUTE MAXIMUM RATINGS

SYMBOL	PARAMETER	RATING	UNIT
VS	Supply voltage	±22	V
VIN	Input voltage	±V supply	V
VDIFF	Differential input voltage1	±0.5	V
TA	Operating temperature range
	SE	-55 to +125	°C
	SA	-40 to +85	°C
	NE	0 to +70	°C
TSTG	Storage temperature range	-65 to +150	°C
TJ	Junction temperature	150	°C
PD	Power dissipation at 25°C2
	16D Pkg	1350	mW
	16N Pkg	1500	mW
	8D Pkg	750	mW
	8FE Pkg	800	mW
	8N Pkg	1150	mW
	Output short-circuit duration3	Indefinite
TSOLD	Lead soldering temperature (10sec max)	300	°C

NOTES:

1.Diodes protect the inputs against over voltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential input voltage exceeds 0.6V. Maximum current should be limited to ±10mA.

2.For operation at elevated temperature, derate packages based on the following junction-to-ambient thermal resistance:

8-pin ceramic DIP 150°C/W

8-pin plastic DIP 105°C/W

8-pin plastic SO 160°C/W

16-pin plastic DIP 80°C/W

16-pin plastic SO 90°C/W

3.Output may be shorted to ground at VS=±15V, TA=25°C. Temperature and/or supply voltages must be limited to ensure dissipation rating is not exceeded.

August 31, 1994

115

Philips Semiconductors Linear Products	Product specification

Dual and single low noise op amp

NE5533/5533A/

NE/SA/SE5534/5534A

DC ELECTRICAL CHARACTERISTICS

T =25°C, V		=±15V, unless otherwise specified. 1, 2, 3
A	S
					SE5534/5534A			NE5533/5533A
SYMBOL			PARAMETER	TEST CONDITIONS				NE/SA5534/5534A			UNIT
					Min	Typ	Max	Min	Typ	Max
VOS						0.5	2		0.5	4	mV
			Offset voltage	Over temperature			3			5	mV
VOS/	T					5			5		μV/°C
IOS						10	200		20	300	nA
			Offset current	Over temperature			500			400	nA
IOS/	T					200			200		pA/°C
IB						400	800		500	1500	nA
			Input current	Over temperature			1500			2000	nA
IB/ T						5			5		nA/°C
ICC			Supply current			4	6.5		4	8	mA
			per op amp	Over temperature			9			10	mA
VCM			Common mode input range		±12	±13		±12	±13		V
CMRR			Common mode rejection ratio		80	100		70	100		dB
PSRR			Power supply rejection ratio			10	50		10	100	μV/V
AVOL			Large-signal voltage gain	RL≥ 600Ω, VO=±10V	50	100		25	100		V/mV
				Over temperature	25			15			V/mV
				RL≥ 600Ω	±12	±13		±12	±13		V
				Over temperature	±10	±12		±10	±12		V
VOUT			Output swing	RL≥ 600Ω, VS=±18V	±15	±16		±15	±16		V
				RL≥ 2kΩ	±13	±13.5		±13	±13.5		V
				Over temperature	±12	±12.5		±12	±12.5		V
RIN			Input resistance		50	100		30	100		kΩ
ISC			Output short circuit current			38			38		mA

NOTES:

1.For NE5533/5533A/5534/5534A, TMIN = 0°C, TMAX = 70°C

2.For SE5534/5534A, TMIN = -55°C, TMAX = +125°C

3.For SA5534/5534A, TMIN = -40°C, TMAX = +125°C

August 31, 1994

116