Philips GC2030 Service Manual

4 (1)
Philips GC2030 Service Manual

Steam Iron Mistral

GC2030

Philips Domestic Appliances and Personal Care

Service Manual

PRODUCT INFORMATION

Features

-Colour white/pink

-Ceralon soleplate

-Tank capacity (200 ml)

-Steam rate (25 g/min)

-Calc clean

-Shot of steam (45 g/min)

-Vertical steam

-Drip stop

-Automatic shut-off

-Integrated cord winder with clip

-Length of cord : 1.9 m.

Safety Information

-This product meets the requirements regarding interference suppression on radio and TV.

-After the product has been repaired, it should function properly and has to meet the safety requirements and legal regulations as officially laid down at this moment.

TECHNICAL INFORMATION

Voltage

: 120 V, 220 - 240 V

Frequency

:

50 - 60 Hz

Power

:

1300 W, 1600 W

Water Advice

Suitable for tap water use. However if the tap water in your area is very hard, we advise you to mix it with a equal portion of distilled water or to use distilled water only.

Soleplate

Ceralon, the name indicates the strong combination of a non-stick coating (“lon”) blended with ceramic (“Cera”) particles. The soleplate is coated with Ceralon material which is smooth gliding, high scratch resistance and good durability advantage over the non stick coatings.

Auto shut-off (ASO)

A relay in the electronic module interrupts the power to the heating element when the iron has been motionless.

-for 30 secs in the horizontal position.

-for 8 minutes in the vertical position.

The red “Auto-off” pilot light starts blinking.

When the iron is moved again, it is automatically switched ‘ON’ again.

Calc clean

The integrated Calc clean function ensure a longer lifetime using normal tap water by removing the scale out of the steam chamber.

Shot of steam (S.O.S)

The shot of steam knob releases a powerful shot of steam boost (up to 45 g/min), created by a separate shot of steam area. This helps getting rid of stubborn wrinkles easily.

Vertical Steam

The same shot of steam button can be used in a vertical position for curtains or hanging garments.

Drip stop

Water is only released to through the tank valve into the steam chamber if the soleplate temperature is high enough to evaporate all water. If the temperature is too low, the tank valve is closed by means of a bi-metal disc.

Published by Philips Domestic Appliances and Personal Care

Printed in the Netherlands

© Copyright reserved

Subject to modification

03/06

DISASSEMBLY ADVICE

BACKPLATE 1

SWIVEL 2

CORDSET 3

Remove Screw A 1x

Remove Backplate 1

Remove Screw B 2x (cord clamp)

OPERATION KNOB 4

DOSING UNIT 5

 

INLAY 6

 

PUMP 8

 

NOZZLE 9

Remove

Screw A 1x

Remove

Backplate 1

Remove

Screw B 2x (cord clamp)

Remove

Cord set 3

Remove

Dosing unit 5

Remove

Screw D 1x

Remove

Operation knob 4

Remove

Screw C 2x

Remove

Inlay 6

DIAL 10

LIGHT CONDUIT 11

 

TANK SET 12

 

 

 

LIGHT 13

Remove

Screw A 1x

Remove

Backplate 1

Remove

Screw B 2x (cord clamp)

Remove

Cord set 3

Remove

Dosing unit 5

Remove

Screw D 1x

Remove

Operation knob 4

Remove

Screw C 2x

Remove

Inlay 6

Remove

Dial 10

Remove

Screw E 1x

 

 

 

 

GC2030

COVER 14

THERMOSTAT BUSH 15

 

SOLEPLATE 16

 

 

 

SEALING SET 7

Remove

Screw A 1x

Remove

Backplate 1

Remove

Screw B 2x (cord clamp)

Remove

Cord set 3

Remove

Dosing unit 5

Remove

Screw D 1x

Remove

Operation knob 4

Remove

Screw C 2x

Remove

Inlay 6

Remove

Dial 10

Remove

Screw E 1x

Remove

Tank set 12

Remove

Screw F 3x

Romove

Cover 14

REPAIR INSTRUCTIONS

-Due to high voltage of the iron, ONLY the specified cordsets must be used.

-For standardisation reasons :

Dial

: With English/Spanish text only.

Soleplate

: Ceralon soleplate will be provided for all models.

Type plate

: No information about the typenumber and voltage has been stamped onto the typeplate.

 

When replacing the typeplate, engrave at least the typenumber onto the typeplate with a sharp object.

-Thermostat, fitted to the soleplate 16 has already been adjusted by the supplier and secured by glue. To avoid mal-function of the iron, NEVER re-adjust the thermostat.

NOTE : the thermostat can only be ordered together with the soleplate assembly 16.

-Parts with numbers from 100 and higher, cannot be ordered seperately.

OPTIONAL (accessories)

- No specific issues

2-4

Loading...
+ 2 hidden pages