DVD Player
DV-220KV-K DV-120K-K
Operating Instructions
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
D3-4-2-1-1_A1_En
CAUTION
This product is a class 1 laser product, but this product contains a laser diode higher than Class 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.
CLASS 1
LASER PRODUCT
D3-4-2-1-8*_C_En
WARNING
This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.
WARNING
Before plugging in for the first time, read the following section carefully.
The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230 V or 120 V) written on the rear panel.
WARNING
To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment.
VENTILATION CAUTION
When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 10 cm at top, 10 cm at rear, and 10 cm at each side).
WARNING
Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed.
Operating Environment
Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)
D3-4-2-1-7c*_A1_En
2 En
If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. If connected to an AC outlet, the cut-off plug can cause severe electrical shock. Make sure it is properly disposed of after removal.
The equipment should be disconnected by removing the mains plug from the wall socket when left unused for a long period of time (for example, when on vacation).
CAUTION
The STANDBY/ON switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).
For Taiwan exclusively
Taiwanese two pin flat-bladed plug
K056_En
English
3
Before you start |
|
What’s in the box.............................................................. |
5 |
Loading the batteries in the remote control................. |
5 |
Connections |
|
Connecting using an audio/video cable....................... |
6 |
Connecting using an HDMI cable (DV-220KV-K |
|
only).................................................................................... |
6 |
Part Names and Functions |
|
Remote control................................................................. |
8 |
Playback |
|
Playing discs or files...................................................... |
10 |
Example of display on main unit display window........... |
11 |
Playing files stored on USB devices............................ |
12 |
Recording audio CD tracks on USB devices.............. |
12 |
Playing in the desired order (Programmed Play)........... |
13 |
Karaoke............................................................................ |
13 |
Changing the settings |
|
Audio Settings parameters........................................... |
14 |
Video Adjust parameters............................................... |
14 |
Initial Settings parameters........................................... |
14 |
Playable discs and files |
|
Playable discs................................................................. |
16 |
Playable files................................................................... |
17 |
Additional information |
|
Troubleshooting............................................................. |
18 |
Language Code Table and Country/Area Code |
|
Table................................................................................. |
22 |
Setting the TV system.................................................... |
23 |
Cautions on use.............................................................. |
23 |
Handling discs................................................................ |
25 |
Specifications................................................................. |
26 |
4 En
Before you start
What’s in the box
Remote Control
Audio/video cable
Power cable
AA batteries (R6) x 2
Operating instructions (this document)
Front panel button names sticker (Taiwanese model only) – Chinese language button names for the front panel controls.
Remote control overlay (Taiwanese model only) – Place the overlay on the remote control to be able to read the buttons in Chinese
When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/area.
WARNING
Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near
a heater. This can cause batteries to leak, overheat, explode or catch fire. It can also reduce the life or performance of batteries.
English
Loading the batteries in the remote control
Open the rear lid and insert the batteries as shown on the diagram below.
To close the rear lid, line up the catch with the groove and slide in the direction of the arrow ( ).
Notes
Do not use any batteries other than the ones specified. Also, do not use a new battery together with an old one.
When loading the batteries into the remote control, set them in the proper direction, as indicated by the polarity marks ( and ).
Do not heat batteries, disassemble them, or throw them into flames or water.
Batteries may have different voltages, even if they are the same size and shape. Do not use different types of batteries together.
To prevent leakage of battery fluid, remove the batteries if you do not plan to use the remote control for a long period of time (1 month or more). If the fluid should leak, wipe it carefully off the inside of the case, then insert new batteries. If a battery should leak and the fluid should get on your skin, flush it off with large quantities of water.
En 5
Connections
Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
Connect the power cord after all the connections between devices have been completed.
Connecting using an audio/ video cable
Player's rear panel (DV-220KV-K)
Yellow
White
Red
Audio/video cable (included)
When an HDMI-compatible device is connected, the resolution is displayed on the front panel display.
The resolution of the video signals output from the player’s HDMI OUT terminal is changed manually. Change the HDMI Resolution setting (page 15).
Settings for two units can be stored in the memory.
This player is designed for connection to HDMIcompatible devices. It may not operate properly if connected to DVI devices.
Connecting to a TV
Player's rear panel (DV-220KV-K)
HDMI cable (commercially available)
To audio/video |
Match the direction of the plug to |
input terminals |
the terminal and insert straight. |
terminal
TV
TV
Connecting using an HDMI cable (DV-220KV-K only)
By using an HDMI cable, digital signals can be transferred to an HDMI-compatible TV on a single cable with no loss of picture or sound quality. After connecting, make the player’s resolution and HDMI color settings according to the HDMI-compatible TV. Also refer to the HDMI-compatible TV’s operating instructions.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
Notes
This player’s interface is designed based on the HighDefinition Multimedia Interface specification.
6 En
Connecting to an AV receiver or amplifier
Player's rear panel (DV-220KV-K)
Connecting using commercially available cables
The player can be connected to a TV, etc., using commercially available component video cables.
The player can be connected to an AV amplifier, etc., using commercially available digital audio cables.
English
HDMI cable (commercially available)
terminal |
|
AV receiver |
From HDMI |
or amplifier |
output |
HDMI cable |
terminal |
|
|
(commercially |
|
available) To HDMI input |
|
|
terminal |
Match the direction of the plug to the terminal and insert straight.
TV
Audio signals that can be output from the player’s HDMI OUT terminal
44.1 kHz to 96 kHz, 16-bit/20-bit/24-bit 2-channel linear PCM audio (including 2-channel downmixing)
Dolby Digital 5.1-channel audio
DTS 5.1-channel audio
MPEG audio
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
En 7
Part Names and Functions
Remote control
|
STANDBY/ON |
|
OPEN/CLOSE |
|
1 |
|
|
|
|
|
AUDIO |
SUBTITLE |
ANGLE |
|
2 |
|
|
|
|
3 |
|
|
|
DVD/ |
|
1 |
2 |
3 |
USB |
4 |
4 |
5 |
6 |
CLEAR |
|
7 |
8 |
9 |
0 |
|
TOP MENU |
KEY |
|
MENU |
5 |
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
ECHO |
ENTER |
ECHO |
|
|
- |
+ |
||
|
HOME |
|
|
|
|
MENU |
|
|
RETURN |
7 |
|
KEY |
|
|
8 |
|
PLAY |
|
|
|
|
|
|
|
9 |
|
|
|
|
|
PREV |
PAUSE |
STOP |
NEXT |
10 |
|
|
|
|
11 |
KARAOKE |
PLAY MODE |
ZOOM |
DISPLAY |
12
13
DVD
14
15
16
17
18
19
20
21
22
23
24
KEY /KEY (page 13)
ECHO +/ECHO - (page 13)
ENTER
Use this to implement the selected item or enter a setting that you have changed.
7 HOME MENU
Press to display/hide the Home Menu.
|
HOME MENU |
|
DVD |
Audio Settings |
Video Adjust |
Play Mode |
Disc Navigator |
Initial Settings |
CD –> USB Rec |
Audio Settings (page 14)
Video Adjust (page 14)
Play Mode (PLAY MODE on page 8)
Disc Navigator (MENU on page 9)
Initial Settings (page 14)
CD -> USB Rec (page 12)
8 PLAY
Press to start playback.
9/ /
Press during playback to fast-reverse.
Press in the pause mode to move backward frame-by-frame.
Press and hold in while in the pause mode for slow play in the reverse direction.
1 STANDBY/ON
Press to turn the power on and off.
2 AUDIO
For discs or files including multiple audio streams/ channels, the audio stream/channel can be switched during playback.
3 SUBTITLE
On DVD Video or DivX discs containing subtitles in multiple languages, the subtitle can be switched during playback.
4 Number buttons (0 to 9)
Use these to specify and play the title, chapter, track or file you want to view/listen to. Also use them to select items on menu screens, etc.
5 TOP MENU
Press to display the top menu of the DVD Video.
6 / / /
Use these to select items, change settings and move the cursor.
8 En
A PREV
Press to return to the beginning of the currently playing title, chapter, track or file. Press twice to move back to the beginning of the previous title, chapter, track or file.
B PAUSE
Press to stop playback temporarily. Press again to resume.
CKARAOKE (page 13)
DPLAY MODE
Press to display/hide the Play Mode screen.
Play Mode |
|
A-B Repeat |
A(Start Point) |
Repeat |
B(End Point) |
Random |
Off |
Program |
|
Search Mode |
|
A-B Repeat
The specified section within a single title or track is played repeatedly.
Repeat
Plays titles, chapters, tracks or files repeatedly.
Random
Playes titles, chapters or tracks in random order.
Program (page 13)
Plays titles, chapters, tracks or files in the order in which you program them.
Search Mode
Plays the specified number or time within the title, chapter, track or file.
The Play Mode function may not work for some discs or files.
E OPEN/CLOSE
Open the disc tray and load the disc.
F ANGLE
On DVD Video discs containing multiple angles, the angle can be switched during playback.
G DVD/USB (page 12)
Press to switch between the DVD and USB modes.
H CLEAR
Press to clear the selected item. Use this for example if you input the wrong number.
IMENU
Press to display the menu screen or Disc Navigator.
Select and play the title, chapter, track or file from the Disc Navigator.
Ex.: DVD video Disc Navigator
01 |
|
|
02 |
|
|
03 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
04 |
|
|
05 |
|
|
06 |
|
|
|
|
|
|
|
|
|
Disc Navigator: Title 0149: ––
J RETURN
Press to return to the previous screen.
K//
Press during playback to fast-forward.
Press in the pause mode to move forward frame-by-frame.
Press and hold in while in the pause mode for slow play in the forward direction.
L NEXT
Press during playback to skips ahead to the beginning of the next title, chapter, track or file.
M STOP
When STOP is pressed during playback, the point at which playback was stopped is stored in the memory. When PLAY is pressed, playback resumes from the point at which it was stopped.
N DISPLAY
The elapsed time, amount remaining, etc., is displayed.
O ZOOM
Zooming on the image
English
En 9