KONICA MINOLTA MEDICAL & GRAPHIC IMAGING EUROPE B.V.
Distributed by:
World’s fastest dry imager(*1)
Through the adoption of new technologies the first print time has been cut to a mere 50 seconds. The body has the compactness of a small copier, but offers the same high performance as our larger flagship machine. With a throughput of 180 sheets (mixed sizes) per hour,the DRYPRO 873 dramatically improves productivity in all your printing work.
*1:As of August 2008
Five-size print capability and the world’s smallest design (*2)
The DRYPRO 873 comes in a less imposing compact body only 1150 mm in height and boasts a footprint of just 0.35 m2, while providing five sizes (in operation 3 sizes at the same time) of printing film ranging from 14"x17” to 8"x10”.The main film sizes are supported, enabling the printing of life-size images.Furthermore,it supports supply units of up to 2 trays + 1 additional tray. Film size can be selected depending on the purpose.
*2: Installation area as of August 2008
Range of options to suit your needs
Two trays come as standard for film supply, and an optional third tray can be added. These optional supply units are available in five sizes (from 14"x17” to 8"x10”), which can be combined flexibly to suit your particular needs. A six-channel sorter is also available for convenience in post-print sorting.
Designed for 30% energy saving
Dry imagers use heat processing during the imaging stage. Because Konica-Minolta is committed to pursuing green technologies, we have successfully cut electricity consumption by 30% in normal printing operations (*3), making this a truly ecofriendly dry imager.
*3: 8 hours/day, printing of 100 sheet
Size,touch, mechanisms… all designed with the user in mind
User-friendly,quiet design
The DRYPRO 873 emits remarkably little noise, contributing to a pleasant working environment.The running noise has been tuned to the lower tones with reduced high-frequencies, making the unit sound deceptively quiet. While overall noise has been reduced, particular attention has been given to standby noise, providing quietness in today's filmless imaging environment, where standby operation often accounts for most of the usage time.
Total commitment to ease of use
In the DRYPRO 873 we aimed to provide a userfriendly unit with an intuitive user interface and simple operation. Status indicators such as 'Film Empty' are recognizable even from a distance and a direct button allows tray selection when setting film. Ease of operation is further enhanced with additional touches such as simplified film setting requiring minimal mechanical operation.
DICOM 3.0 support
Supports DICOM PRINT, BASIC GRAY SCALE, and DICOM STORAGE (SC) and input up to 16 channels. By adding a backup DICOM imager to the output destinations, any output is automatically redirected to the backup destination when a problem occurs with the main imager. (If an imager in which film of the same size and type as that of the one in which the problem occurred is connected.) Data such as patient ID and patient name can be enlarged and output to film. By enlarging and printing patient data on film, you can substantially improve the efficiency of sorting film.
Not just compact… Not just fast…
A user-friendly design for confident and easy operation – A new dimension in laser imagers.
Loading...