Gaggenau ED 220, ED221-6 User Manual

Operating and assembly instructions

ED 220/221-6..

Built-in steam oven

	ED 220/221-6..	Preface
		Important safeguards		Page 3
		Important instructions		Page 4
		1. Important notes		Page 5-6
		1.1	For your safety	Page 5
		1.2	About use	Page 6
		2. Appliance and accessories		Page 7-8
		2.1	Appliance description	Page 7
		2.2	Display	Page 7
		2.3	Accessories / special accessories	Page 8
		3. Operating for the first time		Page 9-12
		3.1	Important notes	Page 9
		3.2	Calibration	Page 9-10
		3.3	What to do, when ...	Page 10
		3.4	Determining water hardness	Page 11
		3.5	Entering the water hardness	Page 12
		4. Operation		Page 13-19
		4.1	Switching on and off	Page 13
		4.2	Control knobs	Page 13
		4.3	Operating modes	Page 14
		4.4	Operating the timer	Page 15-19
		5. Special functions		Page 20-25
		5.1	Child lock	Page 20
		5.2	Options menu	Page 21
		5.3	Core temperature sensor	Page 22-23
		5.4	Steaming	Page 24
		5.5	Condensing	Page 24
		5.6	Display of the current cooking compartment
			temperature	Page 25
		5.7	Power failure protection	Page 25
		5.8	Holiday protection	Page 25
		5.9	Cleaning aid	Page 25
		6. Further uses		Page 26-27
		7. Cooking table, Baking table		Page 28-32
		8. Tips and tricks		Page 33
		9. Cleaning and care		Page 34-37
		9.1	Manual cleaning	Page 34
		9.2	Cleaning the side plate	Page 35
		9.3	Cleaning aid	Page 36-37
		10. Maintenance		Page 38-41
		10.1 General		Page 38
		10.2 Lamp replacement		Page 38
		10.3 Descaling		Page 39
		10.4 Disassembly of the front window		Page 40
		10.5 Remedying small malfunctions yourself		Page 41

1

Preface

Fig. 1

2

With your steam oven you can experience modern professional cooking technology in your own household.

The steam oven offers the following advantages:

–Cooking with steam allows gentle preparation. The valuable substances contained in the foodstuffs you prepare are retained almost completely.

–Diverse meals can be prepared without any transfer of taste.

–Thanks to a special combined steaming method, foodstuffs are neither dried out nor drained of their goodness.

–Gently re-heating up food is possible, and prepared meals retain their natural appearance.

To ensure that you will be able to use this appliance in all its diversity, read through the operating and assembly instructions

conscientiously before operating it for the first time. The instructions contain important notes on use, installation and maintenance of

the appliance.

On the following pages you will find important notes on safety and operation. These notes will serve to ensure your personal safety and the lasting value of your appliance.

The chapters entitled “Structure and operating principle” and “Operation” tell you all about what your appliance can do and how you operate it.

The chapter entitled “Cleaning and care” will make sure that your appliance will stay operable and beautiful for a long time.

We have also compiled some “Tips and tricks” for your.

And now we wish you lots of fun with your steam oven.

Important safeguards

1.Read all instructions.

2.Do not touch hot surfaces. Use handles or

knobs.

3.To protect against electrical shock do not immerse cord or plug in water or liquid.

4.Close supervision is necessary when any appliance is used by or near children.

5.Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.

6.Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.

7.The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.

8.Do not use outdoors.

9.Do not let cord hang over edge of table or counter, or touch hot surfaces.

10.Do not place on or near a hot gas or electric burner, or in a heated oven.

11.Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.

12.Do not use appliance for other than intended use.

13.To reduce the risk of fire, do not place any heating or cooking appliance beneath the appliance.

14.To reduce the risk of fire, do not mount unit over or near any portion of a heating or cooking appliance.

15.Save these instructions.

3

Important instructions

1.a) Proper installation - Be sure your appliance is properly installed and grounded by a qualified electrician.

b)Never use your appliance for warming or heating the room.

c)Do not leave children alone - Children should not be left alone or unattended in areas where the appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

d)Wear proper apparel - Loose-fitting or hanging garments should never be worn while using the appliance.

e)User servicing - Do not repair or replace any part of the appliance unless specifically recommended in the manual. All other servicing should be referred to a qualified technician.

f)Storage in appliance - Flammable materials should not be stored in an oven or near surface units.

g)Do not use water on grease fires - Smother fire or flame or use dry chemical or foam type extinguisher.

h)Use only dry pot holders - Moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch hot heating elements. Do not use a towel or other bulky cloth.

2.a) Use care when opening door - Let hot air or steam escape before removing or replacing food.

b)Do not heat unopened food containers - Build-up of pressure may cause container to burst and result in injury.

c)Keep oven vent ducts unobstructed.

d)Use care when using meat probe,

that it does not contact any heating elements.

e)Placement of oven racks - Always place oven racks in desired location while oven is cool. If rack must be moved while oven is hot, do not let pot holder contact hot heating element in oven.

f)Accessories supplied with this oven are intended only for use in this oven.

3.DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF OVEN -

Heating elements may be hot even though they are dark in color. Interior surfaces of an oven become hot enough to cause burns.

During and after use, do not touch, or let clothing or other flammable materials contact heating elements or interior surfaces of oven until they have had sufficient time to cool. Other surfaces of the appliance may become hot enough to cause burns.

4.a) Do not clean door gasket - The door gasket is essential for a good seal. Care should be taken not to rub, damage, or move the gasket.

b)Do not use oven cleaners - No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven.

c)Clean only parts listed in manual.

d)Oven must be in the OFF position before attempting to attach or install any accessory.

4

1. Important notes

1.1 For your safety

You must not operate the appliance if it is damaged.

The appliance must only be connected by an authorised specialist, paying attention to the relevant regulations of the power supply companies and the regional construction regulations.

Observe the assembly instructions!

Caution: Fire risk! Do not store any combustible objects in your appliance. When operating the appliance, only ever leave the inner parts inside the cooking compartment that you actually need.

As the user, you yourself are responsible for maintenance and proper use in the household.

Only ever operate the appliance under supervision. Disconnect the unit from the water mains when it is not in operation.

Caution! The appliance gets hot during operation. Keep children away!

Caution! There is a risk of injuries if the door is not closed properly. You could jam and crush your fingers and hands.

Caution! Steam may billow out when you open the door. If there is steam in the oven, do not reach in with your hands! Risk of burns!

Caution! When removing the cooking insert hot water may drip from the oven top. Risk of scalding! Be careful when removing the cooking insert as hot liquid might spill. Use heat resistant oven gloves.

Leads of other electrical appliances that are used in the proximity of the cooker must not be jammed in by the hot oven door.

Do not clean the appliance with a steam cleaning apparatus or with water pressure – risk of shortcircuits!

Disconnect the appliance from the water and electricity mains. Switch off the corresponding fuse and turn off the tap.

Caution! For technical reasons the lamp cover cannot be removed. Lamp must only be replaced by Gaggenau after-sales service.

Repairs may only be carried out by authorised electricians.

Note: the appliance must not be connected to the hot water supply.

No warranty claims can be lodged for any damage resulting from failure to observe these instructions.

Technical modifications reserved.

5

1.2 About use

The appliance is intended solely for use in the household and must not be put to any other uses.

Use the appliance to prepare meals only. It must not be used to heat up the room in which it is installed.

Only ever use the included cooking inserts or order the special accessories.

Do not place any items in the oven compartment that might rust. Rusty accessories will lead to further rusting in the oven compartment!

Do not use any silver tableware in the cooking compartment.

The cooking compartment may become discoloured during prolonged operation. This does not have a detrimental influence on operability of the appliance.

Operation is only possible when the door is closed, otherwise there is a risk that water will spray out of the appliance or that hot steam will come out.

The steam oven uses unpressurized steam, therefore the door can be opened at any time during cooking. To prevent extreme steam from escaping when you open the door, you can condense beforehand. Water may drip when opening the door.

Steam may escape during operation and when opening the door.

The (Heating) symbol in the control panel goes off as soon as the required temperature has been reached.

Turn the “Temperature” control knob (right control knob) to the 0 position after use.

In the event of malfunctions, first of all check the household fuses. If the problem has nothing to do with the power or water supply, please contact your specialist dealer or your local Gaggenau aftersales service.

The door window may fog up at all moisture levels (above all at the 100 % moisture level).

Operating noise may occur in all operating modes. Opening and closing of the air flap causes clicking noise.

The appliance rinses automatically when switched on if it has not been in operation for a prolonged period of time or after a prolonged power failure (several hours). This removes water that is left over in the pipes.

The food being cooked must not come into contact with the sides or the grease filter.

At set temperatures below 65 °C / 150 °F , the light is switched off after a few seconds to ensure that the halogen lamp will not additionally heat up the oven compartment. This ensures more precise temperature coordination. The light in the oven compartment is switched on again for a few seconds if you turn one of the two control knobs or if you press a key.

Calibration

(automatic boiling point-adjustment):

the boiling point of water depends on the barometric pressure. The barometric pressure changes with the altitude of the place where the appliance is installed. During self-adjustment, the appliance adapts itself to the pressure conditions prevailing at the appliance’s location.

The appliance cannot be operated if it has not been calibrated!

The appliance features a descaling display. When it flashes, this is an indication that the appliance must be descaled. Before commencing operation, you must enter the water hardness in your household on the appliance.

6

2. Appliance and accessories
2.1 Appliance description
		1		2		3					1	Grease filter
											2	Air flap
											3	Slide-in grills
											4	“Temperature” control knob
											5	“Moisture level” control knob
											6	Core temperature sensor
											7	Base strainer with siphon trap
											8	Side plate
											9	Display
Fig. 2	9	8		7	6	5	4
2.2 Display
											10	Timer key
10	11									12	11	Core temperature sensor key
											12	Plus key
											13	Minus key
											14	Temperature / Moisture level display
											15	Time display
											16	Steaming / condensing key
17	16			15				14		13	17	Confirmation key
Fig. 3
											18	“Child lock" symbol (symbol flashes)
18		19	20	21 22 23				24	25	26 27	19	“Show room mode" symbol (symbol lights constantly)
												“Duration, end" symbol
											20	“Short timer" symbol
											21	“Cooking time" symbol
											22	“Core temperature sensor" symbol
											23	“Water connection" symbol
											24	“Heating" symbol
											25	“Steaming / condensing" symbol
Fig. 4	28					29	30	31			26	“Descaling" symbol
											27	“Door lock" symbol
											28	“Start calibration" symbol
											29	“Steaming" symbol
											30	“Hot air" symbol
											31	“Cleaning aid" symbol

7

2.3 Accessories / special accessories

Fig. 5

Fig. 6

Fig. 7

As standard, the appliance comes with the following accessories:

–Stainless steel cooking insert GN 2/3, unperforated, 40 mm / 11/2 ´´deep (Fig. 5)

–Stainless steel cooking insert GN 2/3, perforated, 40 mm / 11/2 ´´deep (Fig. 6)

–Wire grill (Fig. 7)

–Water connection pipe (10 ft)

–Waste water pipe (10 ft)

You can order the following special accessories:

– DR 220-010: Pressure reducer, connection accessory for water pressure 6-10 bar

– GZ 010-011: Extension pipes for water connections

– WF 040-020: Brita descaling system (filter head and filter cartridge). If the hardness of the water exceeds 7 ° (American water hardness), you must install a descaling system before the appliance.

–WF 040-021: Set of 3 filter cartridges

–KB 220-114: Stainless steel cooking insert

GN 1/3, unperforated,

40mm / 11/2 ´´deep

–KB 220-124: Stainless steel cooking insert

GN 1/3, perforated, 40 mm / 11/2 ´´deep

8

3. Operating for the first time

3.1 Important notes

Before operating the appliance for the first time, please pay attention to the following notes:

Read through these instructions attentively before operating the appliance for the first time.

Remove the packaging from the appliance and dispose of it properly.

Pay attention to the fact that there are accessories in the base of the packaging.

Keep packaging elements away from children.

Thoroughly clean the appliance and accessories before using them for the first time. This will eliminate any “newness” smells and soiling (see Chapter 9).

3.2 Calibration

The boiling point of water depends on the barometric pressure at mean sea level.

During calibration, the appliance is adjusted to the pressure conditions prevailing at the altitude where the appliance is installed.

Recalibrate the appliance manually if you should move home to a different altitude (see chapter entitled “Options menu” on Page 21).

Every appliance is subjected to a thorough check before it arrives in your home. It is therefore possible that there is still water in the appliance.

Before operating the appliance for the first time, make sure that the water connection is properly secured.

When you operate the appliance for the first time, the suggested time 8:00 appears on the display. You can now choose the required time of day by pressing the + and – keys. Press the

(Confirmation) key to confirm the entered value.

Important:

the calibration process cannot be interrupted.

Should the calibration process be interrupted by opening the door or switching off the appliance, the steam oven will not function. The appliance will automatically start calibration until the operation has been completed.

Recalibration is not necessary after a power failure.

9

Fig. 8

Fig. 9

3.3 What to do, when ...

Proceed as follows:

–Install the appliance at the required location (see assembly instructions).

–Remove all loose parts from the oven compartment (baking tray etc.).

–Close the appliance door.

–Open the water tap.

–Self-adjustment starts automatically as soon as you turn the “Temperature” control knob to any temperature. This takes around 15 minutes. The elapsing time appears in the display. The “CAL” symbol for calibration appears in the display.

–An audible signal sounds after completion of calibration. The appliance is now ready for operation. “--:--” appears on the display. The

(Duration) and (Cooking time) symbols flash on the display.

–Turn the “Temperature” control knob back to the 0 position. The appliance is now ready for operation.

The display repeatedly flashes the symbol (water connection).

The appliance receives no water. Turn the water connection on. Check that the pipe is correctly connected and free from bends. Turn the “Temperature” control knob to 0 and then to the required temperature.

The R symbol appears on the display. The appliance has not been calibrated. Switch the appliance on,

			the calibration process starts automatically.
The		symbol appears on the display. The appliance is in show room mode without heating function.
The appliance does not calibrate or			Disconnect the appliance from power supply for a few seconds
heat up, although the heating symbol			(by switching off the fuse), then within 3 minutes press + key
appears on the display.			and keep pressed and turn “Temperature” control knob to any
			temperature (not light!).
The		symbol flashes on the display.	The child lock is operating (see page 20).
The CAL and 40 °C / 104 °F symbol			The temperature in the oven is above 40 °C / 104 °F . Therefore the
flash alternating on the display.			calibration cannot take place. The actual temperature appears on
			the left of the display. The appliance automatically cools the oven
			below 40 °C / 104 °F and re-starts the calibration.
F 61 or F 62 lights on the display.			Check the power and water supply. If these are functioning
			correctly call the Gaggenau after-sales service.
10

3.4 Determining water hardness

Water hardness range 4 has been pre-entered on the appliance. If the hardness of the water in your household should deviate from this value, the correct water hardness range (between 1

and 4) must be entered before commencing operation of the appliance. You can find out the hardness of the water in your household either by consulting your waterworks or by using the included test strip.

–Run water from the tap for about 20 seconds to drain off stale water.

–Fill a glass with tap water and briefly (no more than 1 second) dip the test strip into the water, making sure that all test points are wetted.

–Remove the strip from the water and shake off any surplus water drops.

–You can read off the result after one minute.

–If your water contains lime, one or more of the test areas is/are of a reddish colour and the others stay light or greenish. The number of light (green) areas defines the right water hardness range setting on the appliance.

The test set must be used even if a water descaling system is already installed in your household because, depending on the descaling method, not all scale-forming ions are removed.

Number of light	Water hardness	Water
(green) areas on	(German hardness)	hardness
the test strip		range
3 or more	1-7°	1
2	7-14°	2
1	14-21°	3
None	>21°	4

Please also note that different designations are used outside Germany to describe the hardness of water.

Water hardness range	1	2	3	4
American hardness	1-7°	7-14°	14-21°	>21°
French hardness	1-12°	12-25°	25-37°	>37°
British hardness	1-9°	9-18°	18-26°	>26°
Russian hardness	1-50°	50-100°	100-150°	>150°

11

	3.5 Entering the water hardness
		End		If the hardness of the water in your household
				deviates from the value that is set at the works
		Options menu
				(water hardness range 4), you must enter the
		Temperature	0	right water hardness in the options menu for
	Descaling			commencing operation of the appliance.
		display in
		° C / ° F		Proceed as follows:
				– Turn the two control knobs to the topmost
				position.
	Start	Time display		– Press the	(Confirmation) key and keep it
	Calibration	24h / 12h (AM/PM)		pressed.

			– Turn the “Moisture level” knob to the right.
Fig. 10	Time display		– Release the (Confirmation) key.
	ON/OFF

(only if appliance is switched off)	– The various options appear on the display. Turn
	the “Moisture level” control knob to the right to
	the descaling position.
	– With the + and – keys, set the water hardness
	(between 1 and 4) (Fig. 11).
	– Press the	(Confirmation) key.
	– To quit the options menu, turn the “Moisture”
	control knob back up or turn the “Temperature”
	control knob.
Fig. 11

12