Texas Instruments LM2902KDB, LM2902KPW, LM2902PW, LM324APW, LM324KAPW Schematic [ru]

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V, LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV QUADRUPLE OPERATIONAL AMPLIFIERS

			SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005
	D 2-kV ESD Protection for:		LM124 . . . D, J, OR W PACKAGE
	− LM224K, LM224KA		LM124A . . . J PACKAGE
	− LM324K, LM324KA		LM224, LM224A, LM224K, LM224KA . . . D OR N PACKAGE
			LM324, LM324K . . . D, N, NS, OR PW PACKAGE
	− LM2902K, LM2902KV, LM2902KAV
			LM324A . . . D, DB, N, NS, OR PW PACKAGE
	D Wide Supply Ranges		LM324KA . . . D, N, NS, OR PW PACKAGE
	−	Single Supply . . . 3 V to 32 V	LM2902 . . . D, N, NS, OR PW PACKAGE
			LM2902K . . . D, DB, N, NS, OR PW PACKAGE
		(26 V for LM2902)
			LM2902KV, LM2902KAV . . . D OR PW PACKAGE
	−	Dual Supplies . . . +1.5 V to +16 V
					(TOP VIEW)
		(+13 V for LM2902)	1OUT					4OUT
					1	14
	D Low Supply-Current Drain Independent of
	Supply Voltage . . . 0.8 mA Typ		1IN−		2	13		4IN−
	D Common-Mode Input Voltage Range		1IN+		3	12		4IN+
			VCC		4	11		GND
	Includes Ground, Allowing Direct Sensing
					5
	Near Ground		2IN+			10		3IN+
					6
	D Low Input Bias and Offset Parameters		2IN−			9		3IN−
			2OUT		7	8		3OUT
	−	Input Offset Voltage . . . 3 mV Typ
		A Versions . . . 2 mV Typ
	−	Input Offset Current . . . 2 nA Typ	LM124, LM124A . . . FK PACKAGE
	−	Input Bias Curren t . . . 20 nA Typ
					(TOP VIEW)

A Versions . . . 15 nA Typ

D Differential Input Voltage Range Equal to					1IN−	1OUT	NC	4OUT	4IN−
	Maximum-Rated Supply Voltage . . . 32 V
	(26 V for LM2902)				3	2	1	20 19		4IN+
				1IN+
D	Open-Loop Differential Voltage				4				18
	Amplification . . . 100 V/mV Typ			NC	5				17	NC
D	Internal Frequency Compensation			VCC	6				16	GND
				NC	7				15	NC
description/ordering information				2IN+	8				14	3IN+
					9	10 11 12 13
	These	devices	consist of four independent		2IN−	2OUT	NC	3OUT	3IN−
	high-gain frequency-compensated operational
	amplifiers that are designed specifically to operate
	from a single supply over a wide range of voltages.			NC − No internal connection
	Operation from split supplies also is possible if the
	difference between the two supplies is 3 V to 32 V
	(3 V to 26 V for the LM2902), and VCC is at least
	1.5 V more positive than the input common-mode
	voltage.	The	low supply-current drain is
	independent of the magnitude of the supply
	voltage.

Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For example, the LM124 can be operated directly from the standard 5-V supply that is used in digital systems and provides the required interface electronics, without requiring additional ±15-V supplies.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Copyright 2004, Texas Instruments Incorporated

On products compliant to MIL1PRF138535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

1

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V, LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005

description/ordering information (continued)

ORDERING INFORMATION

	VIOmax	MAX		PACKAGE†		ORDERABLE	TOP-SIDE
T		TESTED
A	AT 25°C	VCC				PART NUMBER	MARKING
			PDIP (N)		Tube of 25	LM324N	LM324N
						LM324KN	LM324KN
					Tube of 50	LM324D	LM324
			SOIC (D)		Reel of 2500	LM324DR
					Tube of 50	LM324KD	LM324K
					Reel of 2500	LM324KDR
	7 mV	30 V			Reel of 2000	LM324NSR	LM324
			SOP (NS)		Tube of 50	LM324KNS	LM324K
					Reel of 2000	LM324KNSR
					Tube of 90	LM324PW	L324
			TSSOP (PW)		Reel of 2000	LM324PWR
					Tube of 90	LM324KPW	L324K
					Reel of 2000	LM324KPWR
0°C to 70°C			PDIP (N)		Tube of 25	LM324AN	LM324AN
					Tube of 25	LM324KAN	LM324KAN
					Tube of 50	LM324AD	LM324A
			SOIC (D)		Reel of 2500	LM324ADR
					Tube of 50	LM324KAD	LM324KA
					Reel of 2500	LM324KADR
	3 mV	30 V			Reel of 2000	LM324ANSR	LM324A
			SOP (NS)		Tube of 50	LM324KANS	LM324KA
					Reel of 2000	LM324KANSR
			SSOP (DB)		Reel of 2000	LM324ADBR	LM324A
					Tube of 90	LM324APW	L324A
			TSSOP (PW)		Reel of 2000	LM324APWR
					Tube of 90	LM324KAPW	L324KA
					Reel of 2000	LM324KAPWR
			PDIP (N)		Tube of 25	LM224N	LM224N
						LM224KN	LM224KN
	5 mV	30 V			Tube of 50	LM224D	LM224
			SOIC (D)		Reel of 2500	LM224DR
					Tube of 50	LM224KD	LM224K
−25 °C to 85°C					Reel of 2500	LM224KDR
			PDIP (N)		Tube of 25	LM224AN	LM224AN
					Tube of 25	LM224KAN	LM224KAN
	3 mV	30 V			Tube of 50	LM224AD	LM224A
			SOIC (D)		Reel of 2500	LM224ADR
					Tube of 50	LM224KAD	LM224KA
					Reel of 2500	LM224KADR

†Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.

2	POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V, LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005

ORDERING INFORMATION (CONTINUED)

	VIOmax	MAX	PACKAGE†		ORDERABLE	TOP-SIDE
T		TESTED
A	AT 25°C	VCC			PART NUMBER	MARKING
			PDIP (N)	Tube of 25	LM2902N	LM2902N
				Tube of 25	LM2902KN	LM2902KN
				Tube of 50	LM2902D	LM2902
			SOIC (D)	Reel of 2500	LM2902DR
				Tube of 50	LM2902KD	LM2902K
				Reel of 2500	LM2902KDR
				Reel of 2000	LM2902NSR	LM2902
		26 V	SOP (NS)	Tube of 50	LM2902KNS	LM2902K
	7 mV			Reel of 2000	LM2902KNSR
−40 °C to 125°C			SSOP (DB)	Tube of 80	LM2902KDB	L2902K
				Reel of 2000	LM2902KDBR
				Tube of 90	LM2902PW	L2902
			TSSOP (PW)	Reel of 2000	LM2902PWR
				Tube of 90	LM2902KPW	L2902K
				Reel of 2000	LM2902KPWR
		32 V	SOIC (D)	Reel of 2500	LM2902KVQDR	L2902KV
			TSSOP (PW)	Reel of 2000	LM2902KVQPWR	L2902KV
	2 mV	32 V	SOIC (D)	Reel of 2500	LM2902KAVQDR	L2902KA
			TSSOP (PW)	Reel of 2000	LM2902KAVQPWR	L2902KA
			CDIP (J)	Tube of 25	LM124J	LM124J
			CFP (W)	Tube of 25	LM124W	LM124W
	5 mV	30 V	LCCC (FK)	Tube of 55	LM124FK	LM124FK
−55 °C to 125°C			SOIC (D)	Tube of 50	LM124D	LM124
				Reel of 2500	LM124DR
	2 mV	30 V	CDIP (J)	Tube of 25	LM124AJ	LM124AJ
			LCCC (FK)	Tube of 55	LM124AFK	LM124AFK

†Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.

symbol (each amplifier)

IN−

IN+

− OUT +

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

3

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V, LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005

schematic (each amplifier)

VCC

≈6- A	≈6- A	≈100- A
Current	Current	Current
Regulator	Regulator	Regulator

OUT

IN−
	†
IN+		≈50- A
	†	Current
		Regulator

GND

To Other

Amplifiers

COMPONENT COUNT (total device)

Epi-FET	1
Transistors	95
Diodes	4
Resistors	11
Capacitors	4

†ESD protection cells - available on LM324K and LM324KA only

4	POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V, LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

		LM2902	ALL OTHER	UNIT
			DEVICES
Supply voltage, VCC (see Note 1)		±13 or 26	±16 or 32	V
Differential input voltage, VID (see Note 2)		±26	±32	V
Input voltage, VI (either input)		−0.3 to 26	−0.3 to 32	V
Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C,		Unlimited	Unlimited
VCC ≤ 15 V (see Note 3)
	D package	86	86
	DB package	96	96
Package thermal impedance, θJA (see Notes 4 and 5)	N package	80	80	°C/W
	NS package	76	76
	PW package	113	113
	FK package		5.61
Package thermal impedance, qJC (see Notes 6 and 7)	J package		15.05	°C/W
	W package		14.65
Operating virtual junction temperature, TJ		150	150	°C
Case temperature for 60 seconds	FK package		260	°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds	J or W package	300	300	°C
Storage temperature range, Tstg		−65 to 150	−65 to 150	°C

†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES: 1. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.

2.Differential voltages are at IN+, with respect to IN−.

3.Short circuits from outputs to VCC can cause excessive heating and eventual destruction.

4.Maximum power dissipation is a function of TJ(max), qJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − T A)/qJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

5.The package thermal impedance is calculated in accordance with JESD 51-7.

6.Maximum power dissipation is a function of TJ(max), qJC, and TC. The maximum allowable power dissipation at any allowable case temperature is PD = (TJ(max) − T C)/qJC. Operating at the absolute maximum TJ of 150°C can affect reliability.

7.The package thermal impedance is calculated in accordance with MIL-STD-883.

ESD protection

	TEST CONDITIONS	TYP	UNIT
Human-Body Model	LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV	±2	kV

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

5

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V, LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005

electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)

LM124

LM324

PARAMETER

TEST CONDITIONS†

TA‡

LM224

LM324K

UNIT

MIN

TYP §

MAX

MIN

TYP §

MAX

VIO

Input offset voltage

VCC = 5 V to MAX,

25°C

3

5

3

7

mV

VIC = VICRmin,

VO = 1.4 V

Full range

7

9

IIO

Input offset current

VO = 1.4 V

25°C

2

30

2

50

nA

Full range

100

150

IIB

Input bias current

VO = 1.4 V

25°C

−20

−150

−20

−250

nA

Full range

−300

−500

25°C

0 to

0 to

Common-mode

VCC − 1.5

VCC − 1.5

VICR

VCC = 5 V to MAX

V

input voltage range

Full range

0 to

0 to

VCC − 2

VCC − 2

RL = 2 kΩ

25°C

VCC − 1.5

VCC − 1.5

VOH

High-level

RL = 10 kΩ

25°C

V

output voltage

VCC = MAX

RL = 2 kΩ

Full range

26

26

RL ≥ 10 kΩ

Full range

27

28

27

28

VOL

Low-level

RL ≤ 10 kΩ

Full range

5

20

5

20

mV

output voltage

AVD

Large-signal

VCC = 15 V, VO = 1 V to 11 V,

25°C

50

100

25

100

V/mV

differential voltage

RL ≥ 2 kΩ

Full range

25

15

amplification

CMRR

Common-mode

VIC = VICRmin

25°C

70

80

65

80

dB

rejection ratio

Supply-voltage

kSVR

rejection ratio

25°C

65

100

65

100

dB

(∆VCC /∆VIO)

VO1/ VO2

Crosstalk

f = 1 kHz to 20 kHz

25°C

120

120

dB

attenuation

VCC = 15 V,

Source

25°C

−20

−30

−60

−20

−30

−60

VID = 1 V,

Full range

−10

−10

VO = 0

mA

IO

Output current

VCC = 15 V,

Sink

25°C

10

20

10

20

VID = −1 V,

Full range

5

5

VO = 15 V

VID = −1 V,

V O = 200 mV

25°C

12

30

12

30

µA

IOS

Short-circuit

VCC at 5 V,

VO = 0,

25°C

±40

±60

±40

±60

mA

output current

GND at −5 V

Supply current

VO = 2.5 V,

No load

Full range

0.7

1.2

0.7

1.2

ICC

VCC = MAX,

mA

(four amplifiers)

No load

Full range

1.4

3

1.4

3

VO = 0.5 VCC,

†All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC for testing purposes is 26 V for LM2902 and 30 V for the others.

‡Full range is −55 °C to 125°C for LM124, −25 °C to 85°C for LM224, and 0°C to 70°C for LM324.

§All typical values are at TA = 25°C.

6	POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V, LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005

electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)

PARAMETER

TEST CONDITIONS†

T ‡

LM2902

LM2902V

UNIT

MIN

TYP §

MAX

MIN

TYP §

MAX

A

VCC = 5 V to

Non-A-suffix

25°C

3

7

3

7

devices

Full range

10

10

VIO

Input offset voltage

MAX,

mV

VIC = VICRmin,

A-suffix

25°C

1

2

VO = 1.4 V

devices

Full range

4

∆VIO/∆T

Input offset voltage

RS = 0 Ω

Full range

7

µV/°C

temperature drift

IIO

Input offset current

VO = 1.4 V

25°C

2

50

2

50

nA

Full range

300

150

∆IIO/∆T

Input offset current

Full range

10

pA/°C

temperature drift

IIB

Input bias current

VO = 1.4 V

25°C

−20

−250

−20

−250

nA

Full range

−500

−500

25°C

0 to

0 to

Common-mode

VCC − 1.5

VCC − 1.5

VICR

VCC = 5 V to MAX

V

input voltage range

Full range

0 to

0 to

VCC − 2

VCC − 2

RL = 2 kΩ

25°C

VOH

High-level

RL = 10 kΩ

25°C

VCC − 1.5

VCC − 1.5

V

output voltage

VCC = MAX

RL = 2 kΩ

Full range

22

26

RL ≥ 10 kΩ

Full range

23

24

27

VOL

Low-level

RL ≤ 10 kΩ

Full range

5

20

5

20

mV

output voltage

AVD

Large-signal

VCC = 15 V, VO = 1 V to 11 V,

25°C

25

100

25

100

V/mV

differential voltage

RL ≥ 2 kΩ

Full range

15

15

amplification

CMRR

Common-mode

VIC = VICRmin

25°C

50

80

60

80

dB

rejection ratio

Supply-voltage

kSVR

rejection ratio

25°C

50

100

60

100

dB

(∆VCC /∆VIO)

VO1/ VO2

Crosstalk

f = 1 kHz to 20 kHz

25°C

120

120

dB

attenuation

VCC = 15 V,

25°C

−20

−30

−60

−20

−30

−60

VID = 1 V,

Source

Full range

−10

−10

VO = 0

mA

IO

Output current

VCC = 15 V,

Sink

25°C

10

20

10

20

VID = −1 V,

Full range

5

5

VO = 15 V

VID = −1 V,

V O = 200 mV

25°C

30

12

40

µA

IOS

Short-circuit

VCC at 5 V,

VO = 0,

25°C

±40

±60

±40

±60

mA

output current

GND at −5 V

Supply current

VO = 2.5 V,

No load

Full range

0.7

1.2

0.7

1.2

ICC

VCC = MAX,

mA

(four amplifiers)

No load

Full range

1.4

3

1.4

3

VO = 0.5 VCC,

†All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC for testing purposes is 26 V for LM2902 and 32 V for LM2902V.

‡ Full range is −40 °C to 125°C for LM2902. § All typical values are at TA = 25°C.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

7

8

75265 TEXAS DALLAS, •655303 BOX OFFICE POST

electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)

LM124A

LM224A

LM324A,

PARAMETER

TEST CONDITIONS†

T ‡

LM324KA

UNIT

A

MIN

TYP §

MAX

MIN

TYP §

MAX

MIN

TYP §

MAX

VIO

Input offset voltage

VCC = 5 V to 30 V,

25°C

2

2

3

2

3

mV

VIC = VICRmin,

VO = 1.4 V

Full range

4

4

5

IIO

Input offset current

VO = 1.4 V

25°C

10

2

15

2

30

nA

Full range

30

30

75

IIB

Input bias current

VO = 1.4 V

25°C

−50

−15

−80

−15

−100

nA

Full range

−100

−100

−200

25°C

0 to

0 to

0 to

Common-mode input

VCC − 1.5

VCC − 1.5

VCC − 1.5

VICR

VCC = 30 V

V

voltage range

Full range

0 to

0 to

0 to

VCC − 2

VCC − 2

VCC − 2

RL = 2 kΩ

25°C

VCC − 1.5

VCC − 1.5

VCC − 1.5

VOH

High-level output voltage

VCC = 30 V

RL = 2 kΩ

Full range

26

26

26

V

RL ≥ 10 kΩ

Full range

27

27

28

27

28

VOL

Low-level output voltage

RL ≤ 10 kΩ

Full range

20

5

20

5

20

mV

AVD

Large-signal differential

VCC = 15 V, VO = 1 V to 11 V,

25°C

50

100

50

100

25

100

V/mV

voltage amplification

RL ≥ 2 kΩ

Full range

25

25

15

CMRR

Common-mode rejection ratio

VIC = VICRmin

25°C

70

70

80

65

80

dB

kSVR

Supply-voltage rejection ratio

25°C

65

65

100

65

100

dB

(∆VCC /∆VIO)

VO1/ VO2

Crosstalk attenuation

f = 1 kHz to 20 kHz

25°C

120

120

120

dB

VCC = 15 V,

Source

25°C

−20

−20

−30

−60

−20

−30

−60

VID = 1 V,

Full range

−10

−10

−10

VO = 0

mA

IO

Output current

VCC = 15 V,

Sink

25°C

10

10

20

10

20

VID = −1 V,

Full range

5

5

5

VO = 15 V

VID = −1 V,

V O = 200 mV

25°C

12

12

30

12

30

µA

IOS

Short-circuit output current

VCC at 5 V,

GND at −5 V,

25°C

±40

±60

±40

±60

±40

±60

mA

VO = 0

Supply current

VO = 2.5 V,

No load

Full range

0.7

1.2

0.7

1.2

0.7

1.2

ICC

VCC = 30 V,

VO = 15 V,

mA

(four amplifiers)

Full range

1.4

3

1.4

3

1.4

3

No load

†All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified.

‡ Full range is −55 °C to 125°C for LM124A, −25 °C to 85°C for LM224A, and 0°C to 70°C for LM324A. § All typical values are at TA = 25°C.

LM2902K, LM324KA, LM324K, LM224KA, LM224K, AMPLIFIERS OPERATIONAL QUADRUPLE 2005 JANUARY REVISED − 1975 SEPTEMBER − SLOS066R	LM324A, LM324, LM224A, LM224, LM124A, LM124,
LM2902KAV LM2902KV,	LM2902V, LM2902,