FEATURES
BIDIRECTIONAL CROWBAR PROTECTION. VOLTAGE RANGE: FROM 62 V TO 270 V.
HOLDING CURRENT : IH = 150 mA min.
REPETITIVE PEAK PULSE CURRENT : IPP = 30 A, 10/1000 μs.
JEDEC REGISTERED PACKAGE OUTLINE
DESCRIPTION
The TP30-xxx series has been designed to protect telecommunication equipment against lightning surges and overvoltages induced by AC power lines.
TP30-xxx Series
TRISILTM
F126
(JEDEC DO-204AC)
SCHEMATIC DIAGRAM
COMPLIES WITH THE FOLLOWING STANDARDS:
(CCITT) ITU-K20
(CCITT) ITU-K17
VDE0433
VDE0878
IEC-1000-4-5
FCC Part 68, lightning surge type A
FCC Part 68, lightning surge type B
Peak Surge |
Voltage |
Current |
Admissible |
Necessary |
Voltage |
Waveform |
Waveform |
Ipp |
Resistor |
(V) |
(μs) |
(μs) |
(A) |
(Ω) |
1000 |
10/700 |
5/310 |
25 |
- |
1500 |
10/700 |
5/310 |
38 |
- |
2000 |
10/700 |
5/310 |
40 |
10 |
2000 |
1.2/50 |
1/20 |
50 |
- |
level 2 |
10/700 |
5/310 |
25 |
- |
level 3 |
1.2/50 |
8/20 |
50 |
- |
1500 |
10/160 |
10/160 |
65 |
15.5 |
800 |
10/560 |
10/560 |
50 |
8.0 |
1000 |
9/720 |
5/320 |
25 |
- |
BELLCORE TR-NWT-001089 |
2500 |
2/10 |
2/10 |
125 |
15.0 |
First level |
1000 |
10/1000 |
10/1000 |
30 |
23.3 |
BELLCORE TR-NWT-001089 |
5000 |
2/10 |
2/10 |
125 |
15.0 |
Second level |
|
|
|
|
|
CNET l31-24 |
1000 |
0.5/700 |
0.8/310 |
25 |
- |
November 1998 - Ed: 5A |
1/6 |
TP30-xxx Series
ABSOLUTE MAXIMUM RATINGS (Tamb = 25°C) |
|
|
|
|
Symbol |
Parameter |
|
Value |
Unit |
P |
Power dissipation on infinite heatsink |
Tamb = 50 °C |
3 |
W |
IPP |
Peak pulse current |
10/1000 μs |
30 |
A |
|
|
8/20 μs |
60 |
|
ITSM |
Non repetitive surge peak on-state current |
tp = 20 ms |
15 |
A |
I2t |
I2t value for fusing |
tp = 20 ms |
1 |
A2s |
dV/dt |
Critical rate of rise of off-state voltage |
VRM |
5 |
kV/μs |
Tstg |
Storage temperature range |
|
- 55 to + 150 |
°C |
Tj |
Maximum junction temperature |
|
150 |
°C |
TL |
Maximumlead temperaturefor solderingduring 10sat 5mm forcase |
230 |
°C |
THERMAL RESISTANCES
Symbol
Rth (j-l)
Rth (j-a)
Parameter |
Value |
Unit |
Junction to leads |
60 |
°C/W |
Junction to ambient on printed circuit |
100 |
°C/W |
with standard footprint dimension |
|
|
ELECTRICAL CHARACTERISTICS
(Tamb = 25°C)
Symbol |
Parameter |
VRM |
Stand-off voltage |
IRM |
Leakage current at stand-off voltage |
VR |
Continuous Reverse voltage |
VBR |
Breakdown voltage |
VBO |
Breakover voltage |
IH |
Holding current |
IBO |
Breakover current |
IPP |
Peak pulse current |
C |
Capacitance |
2/6