SGS Thomson Microelectronics ULQ2004D1, ULQ2004A, ULQ2003D1, ULQ2003A, ULQ2002D1 Datasheet

ULQ2001A - ULQ2003A ULQ2002A - ULQ2004A

.SEVEN DARLINGTONS PER PACKAGE

.

EXTENDED TEMPERATURE RANGE

.(±40 to 105°C)

OUTPUT CURRENT 500 mA PER DRIVER

.(600 mA PEAK)

.OUTPUT VOLTAGE 50 V

INTEGRAL SUPPRESSION DIODES FOR IN-

.DUCTIVE LOADS

OUTPUTS CAN BE PARALLELED FOR

.HIGHER CURRENT

.TTL/CMOS/PMOS/DTL COMPATIBLE INPUTS INPUTS PINNED OPPOSITE OUTPUTS TO SIMPLIFY LAYOUT

SEVEN DARLINGTON ARRAYS

DIP16

DESCRIPTION

The ULQ2001A, ULQ2002A, ULQ2003 and ULQ2004Aare high voltage, high current darlington arrays each containing seven open collector darlington pairs with common emitters. Each channel is rated at 500 mA and can withstand peak currents of 600 mA. Suppressiondiodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout.

The four versions interface to all common logic families :

ULQ2001A	General Purpose, DTL, TTL, PMOS,
	CMOS
ULQ2002A	14-25V PMOS
ULQ2003A	5V TTL, CMOS
ULQ2004A	6-15V CMOS, PMOS

These versatile devices are useful for driving a wide range of loads including solenoids, relays DC motors, LED displays filament lamps, thermal printheads and high power buffers.

The ULQ2001A/2002A/2003Aand 2004A are supplied in 16 pin plastic DIP packages with a copper leadframe to reduce thermal resistance. They are available also in small outline package (SO-16) as ULQ2001D1/2002D1/2003D1/2004D1.

SO16

ORDERING NUMBERS:

ULQ2001A/2A/3A/4A (DIP16)

ULQ2001D1/2D1/3D1/4D1 (SO16)

PIN CONNECTION

April 1993	1/7

ULQ2001A - ULQ2002A - ULQ2003A - ULQ2004A

SCHEMATIC DIAGRAM

Series ULQ-2001A	Series ULQ-2002A
(each driver)	(each driver)

Series ULQ-2003A	Series ULQ-2004A
(each driver)	(each driver)

ABSOLUTE MAXIMUM RATINGS

Symbol	Parameter	Value	Unit
Vo	Output Voltage	50	V
Vin	Input Voltage (for ULQ2002A/D1 - 2003A/D1 - 2004A/D1)	30	V
Ic	Continuous Colletor Current	500	mA
Ib	Continuous Base Current	25	mA
Tamb	Operating Ambient Temperature Range	±40 to 105	°C
Tstg	Storage Temperature Range	±55 to 150	°C
Tj	Junction Temperature	150	°C

THERMAL DATA

Symbol	Parameter		DIP16	SO16	Unit
Rth j-amb	Thermal Resistance Junction-ambient	Max.	70	165	°C/W

2/7

ULQ2001A - ULQ2002A - ULQ2003A - ULQ2004A

ELECTRICAL CHARACTERISTICS (TJ = ±40 to 105oC for DIP16 unless otherwise specified) (TJ = 25 to 105oC for SO16 unless otherwise specified)

Symbol	Parameter	Test Conditions		Min.	Typ. Max. Unit Fig.
ICEX	Output Leakage Current	VCE = 50V				50	μA	1a
		TJ = 105°C, VCE = 50V				100	μA	1a
		TJ = 105°C	VCE = 50V, Vi = 6V			500	μA	1b
		for ULQ2002A
		for ULQ2004A	VCE = 50V, Vi = 1V			500	μA	1b
VCE(sat)	Collector-emitter	IC = 100mA, IB = 250μA			0.9	1.1	V	2
	Saturation Voltage	IC = 200mA, IB = 350μA			1.1	1.3	V	2
		IC = 350mA, IB = 500μA			1.3	1.6	V	2
Ii(on)	Input Current	for ULQ2002A	Vi = 17V		0.82	1.25	mA	3
		for ULQ2003A	Vi = 3.85V		0.93	1.35	mA	3
		for ULQ2004A	Vi = 5V		0.35	0.5	mA	3
			Vi = 12V		1	1.45	mA	3
Ii(off)	Input Current	TJ = 105°C, IC = 500μA		50	65		μA	4
Vi(on)	Input Voltage	for ULQ2002A	VCE = 2V, IC = 300mA			13	V	5
		for ULQ2003A	VCE = 2V, IC = 200mA			2.4	V	5
			VCE = 2V, IC = 250mA			2.7	V	5
		for ULQ2004A	VCE = 2V, IC = 300mA			3	V	5
			VCE = 2V, IC = 125mA			5	V	5
			VCE = 2V, IC = 200mA			6	V	5
			VCE = 2V, IC = 275mA			7	V	5
			VCE = 2V, IC = 350mA			8	V	5
hFE	DC Forward Current Gain	for ULQ2001A	VCE = 2V, IC = 350mA	1000			±	2
Ci	Input Capacitance				15	25 (*)	pF	±
tPLH	Turn-on Delay Time	0.5 Vi to 0.5 Vo			0.25	1 (*)	μs	±
tPHL	Turn-off Delay Time	0.5 Vi to 0.5 Vo			0.25	1 (*)	μs	±
IR	Clamp Diode Leakage	VR = 50V				50	μA	6
	Current	TJ = 105°C, VR = 50V				100	μA	6
VF	Clamp Diode Forward	IF = 350mA			1.7	2	V	7
	Voltage

(*) Guaranteed by design

3/7