VITEK
Alpha Mega Series
Indoor Dome
Cameras
•1000 TV Lines of Resolution (1.39 MegaPixel)
•1/2.9” Sony® CMOS Sensor
•Highly Advanced EN773E Digital Signal Processor
•3.6mm Fixed & 2.8-12mm Varifocal Lens Options
•Available with 35 IR LEDs (120’ Range)
•Advanced OSD Functions: WDR, 3D DNR, DSS, DIS, Sens-up, Motion Detection, Privacy
•Secondary Video Output (Cable Included)
•3-Axis Mount for Optimum Viewing Angle
•12VDC/24VAC Dual Voltage Operation
black
Table of Contents
|
|
BOX CONTENTS / MOUNTING ACCESSORIES |
2 |
AVAILABLE MODELS |
3 |
VTD-A4F/IM INSTALLATION |
4 |
VTD-A2812/IM INSTALLATION |
5 |
VTD-AR2812/IM INSTALLATION |
6 |
INSTALLATION TIPS |
7 |
SETUP MENU |
8 |
OSD OPERATION |
9-19 |
DIMENSIONS |
20 |
SPECIFICATIONS |
21-23 |
NOTES |
24-26 |
1
BOX CONTENTS
1)Alpha Mega Dome Camera
2)Mounting Accessories
3)Secondary Video Output Cable
4)This instruction Manual & Mounting Template
Mounting Accessories
Self Tapping Screws
For attaching the housing base to a solid surface.
Type #: Phillips ST4x30
Qty: 4 (2 screws - VTD-A4F/IM)
Secondary Video Output Cable
To be used with a service monitor for adjusting
the angle, focus and zoom. Qty: 1
2
black
AVAILABLE MODELS
VTD-A4F/IWM
Alpha Mega Series 1000 TVL (1.39MP) Indoor Fixed 3.6mm
Dome - Ivory
VTD-A4F/IBM
Alpha Mega Series 1000 TVL (1.39MP) Indoor Fixed 3.6mm
Dome - Black
VTD-A2812/IWM
Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal
Dome - Ivory
VTD-A2812/IBM
Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal
Dome - Black
VTD-AR2812/IWM
Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal
Dome & 35 IR LEDs - Ivory
VTD-AR2812/IBM
Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal
Dome & 35 IR LEDs - Black
3
VTD-A4F/IM INSTALLATION
a
* See Installation Tips on page 7
4
black
VTD-A2812/IM INSTALLATION
a
/ DC12V
DualPower
* See Installation Tips on page 7
5
VTD-AR2812/IM INSTALLATION
a
/ DC12V
DualPower
* See Installation Tips on page 7
6
black
Installation Tips
1.) Power Consumption - Amperage/Voltage
It is of utmost importance that the proper Voltage and Amperage is used when applying power to your VITEK Alpha Series Dome Camera. They can be powered by either 12V DC or 24V AC (except for the model VTD-A4F/IM - 12V DC only). Always use a UL Listed power transformer.
The Voltage must be measured at the camera location. It is very important that the camera receives no less than the required Voltage or it will be “Starved” and eventually die out. Cameras with Infrared LEDs require substantially more
Amperage than others so please refer to the Specifications (page 21-23) for the camera you are installing.
7
SETUP MENU
8
black