TEFAL FV5210C0, FV5210C1, FV5210E0, FV5210E1, FV5210K0 Instruction Manual

GB

F

RCT

RCS

KR

TH

IR

AR

www.tefal.com

		8
		9
	7	10
	6	11
	5	12
	4	13
	3
		14
	2
		15
		16
	1

17

9

12

11

fig.1

fig.2

fig.3

fig.4

fig.5

fig.6

fig.7

fig.8

fig.9

fig.10

fig.11

fig.12

fig.13

fig.14

fig.15

fig.16

For your safety

•This appliance complies with the technical rules and standards for safety currently in force (Electromagnetic Compatibility, Low Voltage, environment).

•This appliance is not designed to be used by children or other persons unassisted or unattended if their physical, sensory or mental capacities prevent them from using the appliance in complete safety. Children should be supervised to ensure that they do not play with the appliance.

•Warning ! The voltage of your electrical installation must correspond to that of the iron (220V-240V). Connecting to the wrong voltage may cause irreversible damage to the iron and will invalidate the guarantee.

•This iron must always be plugged into an earthed socket. If using a mains extension lead, ensure that it is correctly rated (10A), with an earth.

•If the electrical cord becomes damaged, it must be immediately replaced by an Approved Service Centre to avoid any danger.

•The appliance should not be used if it has fallen, if it has obvious damage, if it leaks or has functional anomalies. Never dismantle your appliance: have it inspected by an Approved Service Centre, so as to avoid any danger.

•Never immerse your iron in water !

•Do not unplug your appliance by pulling on the cord. Always unplug your appliance: before filling or rinsing the reservoir, before cleaning it, after each use.

•Never leave the appliance unattended when it is connected to a power source; if it has not cooled down for approximately 1 hour.

•Your appliance gives off steam, which may cause burns, especially when you are ironing on a corner of your ironing board. Never direct the steam towards people or animals.

•Your iron should be used and placed on a stable surface. When you put your iron onto its iron rest, make sure that the surface on which you put it is stable.

•This product has been designed solely for domestic use. Any inappropriate use or use contrary to the instructions releases the brand from all responsibility and renders the guarantee invalid.

Environment protection first !

Your appliance contains valuable materials which can be recovered or recycled.Leave it at a local civic waste collection point.

Description

1.Spray nozzle

2.Anti-scale valve

3.Steam control

4.Spray Button

5.Turbo Button

6.Auto-Stop safety warning light

(depending on model)

7.Ergonomic grip (depending on model)

8.Electric power cord

9.Lock-System ring to open and close the Ultracord system (depending on model)

10.Ultracord System (depending on model)

11.Water tank opening button

12.Water tank filler flap

13.Integral anti-scale system

(depending on model)

14.Thermostat indicator light

Goes out when the temperature has been reached

15.Thermostat control

for choosing the ironing temperature

16.Extra Stable heel

17.Soleplate

Before first use

•Before using your iron with the steam function for the first time, we recommend

that you operate it in a horizontal position for a few moments, away from your linen. Under the same conditions, press the Turbo button a few times.

•During the first few uses, a harmless odour and smoke may be given off. This has no effect on the use of the iron and will disappear quickly.

4

Please read these instructions carefully. Remove any labels from the soleplate before heating up the iron.

Preparation

What water to use ?

•Your appliance has been designed to operate using untreated tap water. If your water is very

However, it is necessary to operate the Self-Clean function regularly in order to eliminate hard water deposits from the steam chamber.

•Heat concentrates the elements contained in water during evaporation.The types of water listed below contain organic waste or mineral elements that can cause spitting, brown staining, or premature wear of the appliance: water from clothes dryers, scented or softened water, water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or rain water should not be used in your Tefal iron.

hard, it is possible to mix tap water

with store-bought distilled or demineralised water in the following proportions :

-50% tap water,

-50% distilled or demineralised water.

Fill the tank up to the “MAX”.

Never fill the appliance by holding it directly under the tap.

Filling the water tank

•Check that the Ultracord system is properly locked.

• Unplug your iron before filling it.

GB

•Set the steam control to “0” – fig.1.

•Take the iron with one hand and tilt it slightly, with the nose of the soleplate pointing down.

•To open the flap of the water tank, push the button – fig.2.

•Fill the tank up to the “MAX” line – fig.3.

•Close the flap of the water tank, until it clicks into place.

Use

Adjust the temperature and the steam

•Set the thermostat control – fig.4, referring to the table below.

•The thermostat light comes on. It will go out when the soleplate is hot enough

– fig.5.

	FABRIC	POSITION OF	STEAM SETTING
		THERMOSTAT CURSOR	POSITION
	LINEN	MAX
	COTTON	•••
	WOOL
	SILK	••	0
	SYNTHETIC (Polyester,Acetate,	•
	Acrylic, Nylon)

= STEAM ZONE

RECOMMENDATIONS

•Your iron heats up quickly: so begin by ironing fabrics that are ironed at low In order to avoid water

temperatures first, then go on to those requiring a higher temperature,

•If you turn down the thermostat, wait until the thermostat light comes back on before beginning to iron again,

dripping from the iron onto the linen:

- Turn off the steam when ironing silk or

•When ironing fabrics with mixed fibres, set the ironing temperature for the most synthetic fabrics. delicate fibre. For delicate fabrics we recommend testing the fabric first on an - Set it at the minimum

inconspicious place eg (inside the hem).

position for wool.

Make sure that there is water in the tank before using this button.

Spray Function

•Whether steam or dry ironing, you are able to use the spray button to dampen laundry to remove stubborn creases – fig.6.

Obtain more steam

•Press the Turbo button from time to time – fig.7.

•Wait a few seconds between each shot before pressing the Turbo button again.