Loading...
2-891-357-11(1)
LCD Color TV
Operating Instructions |
|
GB |
Before operating the TV, please read the “Safety information” section of this manual.
Retain this manual for future reference.
KLV-46S200A
KLV-40S200A
KLV-32S200A
KLV-26S200A
© 2006 Sony Corporation
WARNING
•To prevent the risk of electric shock, if the AC power cord or plug is damaged, do not insert the plug into the AC power outlet. This plug cannot be used and should be destroyed.
•To prevent the risk of fire or electric shock, do not expose the TV set to rain or moisture.
•Dangerously high voltages are present inside the TV set. Do not open the cabinet. Refer servicing to qualified personnel only.
Introduction
Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.
Trademark information
•Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
•TruSurround XT, SRS and 
symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
•HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
•The illustrations used in this manual are of the KLV-32S200A unless otherwise stated.
2 GB
Table of Contents
Start-up Guide |
4 |
|
|
Safety information ..................................................................................................................... |
7 |
Overview of the remote ........................................................................................................ |
12 |
Overview of the TV buttons and indicators ........................................................................ |
13 |
Watching TV |
|
Watching TV............................................................................................................................ |
14 |
Viewing pictures from connected equipment .......................................................................... |
16 |
Using MENU Functions |
|
Navigating through menus ...................................................................................................... |
17 |
Picture menu ........................................................................................................................... |
18 |
Sound menu............................................................................................................................ |
20 |
Screen menu........................................................................................................................... |
22 |
Setup menu............................................................................................................................. |
23 |
PC Settings menu ................................................................................................................... |
25 |
Channel Setup menu .............................................................................................................. |
26 |
Using Optional Equipment |
|
Connecting optional equipment............................................................................................... |
28 |
Additional Information |
|
Specifications .......................................................................................................................... |
30 |
Troubleshooting ...................................................................................................................... |
32 |
Index ....................................................................................................................................... |
35 |
3 GB
Start-up Guide
1: Inserting batteries into the remote
Connecting an antenna and VCR
AC power cord (supplied)
*
AC IN
Notes
•Observe the correct polarity when inserting batteries.
•Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of the battery. Please consult your local authority.
•Do not use different types of batteries together or mix old and new batteries.
•Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it.
•Do not place the remote in a location near a heat source, or in a place subject to direct sunlight, or in a damp room.
2: Connecting an antenna/VCR
Connecting an antenna only
AC power cord (supplied)
*
AC IN
8
To 8 VHF/UHF (antenna)
Antenna cable (supplied)
|
To 8 VHF/UHF |
|
||
|
(antenna) |
|
|
|
Antenna cable (supplied) |
|
|
||
|
|
|
|
8 |
To antenna output |
|
|
||
|
|
VCR |
|
|
AUDIO VIDEO |
|
|
|
|
R |
L |
|
|
|
VIDEO IN |
|
|
|
|
VIDEO OUT |
|
|
|
|
|
|
|
To S video |
|
To video and |
|
|
output |
|
audio outputs |
|
|
|
|
Audio/Video cable |
S video cable |
|||
(not supplied) |
|
(not supplied) |
||
|
To |
|
1 |
|
|
(S video input) |
|||
|
|
|
|
Y |
|
|
|
|
PB/CB |
|
|
|
|
PR/CR |
|
|
|
L |
|
L |
|
L |
|
L |
|
|
|
||
(MONO) |
|
|
|
|
R |
|
R |
|
R |
1 |
3 |
1 |
R |
2 |
To t1/3 (video input)
L (MONO) 1/3 (audio input)
R 1/3 (audio input)
l: Signal flow
*The position of AC IN jack varies, depending on the TV size.
4 GB
3: Bundling the cables
4: Preventing the TV from toppling over
|
|
|
|
5: Adjusting the viewing |
|
||
-Start |
|||
angle of the TV |
|||
up |
|||
|
|
||
This TV can be adjusted within the angles shown |
Guide |
||
below. |
|||
|
|||
Adjust the angle left and right (swivel) |
|
||
Top view |
|
||
Front
6: Selecting the language
2 |
1 |
|
2
3
3
1 Connect the TV to the AC power outlet
(110-240V AC, 50/60Hz).
2 Press 1 on the TV (top side).
When you switch on the TV for the first time, the Language menu appears on the screen.
When the TV is in standby mode (the 1 (standby) indicator on the TV (front) is red), press "/1 on the remote to switch on the TV.
5 GB
3 Press F/f to select the language displayed on the menu screens, then press 
.
English
The message confirming the TV start Auto Tuning appears on the screen, then go to
“7: Auto Tuning the TV”.
7: Auto Tuning the TV
After selecting the language, a message confirming the TV start Auto Tuning appears on the screen. You must tune the TV to receive channels (TV broadcasts). Do the following to search and store all available channels.
1
3
1 Select “OK” and press 
.
m
Auto Tuning
Programs found: 0
VHF Low
Searching
The TV starts searching for all available channels. This may take some time, please be patient and do not press any buttons on the TV or remote.
Once all available channels have been stored, the TV returns to normal operation, displaying the channel stored on channel number 1.
When a message appears for you to confirm the antenna connections
No programs are found. Check all the antenna connections and press 
to start Auto Tuning again.
2 The Program Sorting menu appears on the screen.
3 Press MENU to exit.
The TV has now tuned in all the available channels.
To change the order in which the channels are stored on the TV
See page 26.
4 To allow this menu to appear again when you turn on the TV, press 
to select “Yes”.
6 GB
Safety information
For Safety
AC power cord
Be sure to connect only the appropriate supplied AC power cord with the plug that fits into the AC power outlet. Unplug the AC power cord when
moving the LCD TV. Do not move the LCD TV with the AC power cord plugged in. It may damage the AC power cord and
result in fire or electric shock. If
the LCD TV has been dropped or damaged, have it checked immediately by qualified service personnel.
Installation
Installation of the LCD TV on the wall should be carried out by qualified service personnel. Improper installation may render the LCD TV unsafe. The LCD TV should be installed near an easily accessible AC power jack.
Medical institution
Do not place this LCD TV in a place where medical equipment is in use. It may cause malfunction of medical instruments.
Carrying
Carrying the LCD TV requires two
or more people. If you carry the LCD TV in a manner other than
that specified, it may drop and a
serious injury may be caused. Be sure two or more people carry the
LCD TV. When transporting, do
not subject the LCD TV to shocks or excessive vibration. The LCD TV may fall and be damaged or cause serious injury.
When lifting the LCD TV or moving the LCD panel of the TV, hold it firmly by the bottom.
Installation and moving
Ventilation
Never cover the ventilation holes in the cabinet. It may cause overheating and result in fire. Unless proper ventilation is provided, the LCD TV may gather dust and get dirty. For proper ventilation, observe the following:
•Do not install the LCD TV turned backward or sideways.
•Do not install the LCD TV turned over or upside down.
•Do not install the LCD TV on a shelf or in a closet.
•Do not place the LCD TV on a rug or bed.
•Do not cover the LCD TV with cloth, such as curtains, or items such as newspapers, etc.
Vehicle and ceiling
Do not install this LCD TV in a vehicle or hang it from the ceiling. Bumping of the vehicle may cause the LCD TV to fall down and cause injury.
Water and moisture
Do not use this LCD TV near water - for example, near a bathtub or shower room. Also do not expose the LCD TV to rain. It may result in fire or electric shock.
Optional accessories
When installing the LCD TV, use the supplied stand or wall-mount bracket (not supplied). Be sure to attach the brackets supplied with your stand. If not, the LCD TV may fall and cause serious injury.
Outdoor use
Do not install this LCD TV outdoors. If the LCD TV is exposed to rain, it may result in fire or electric shock. If the LCD TV is exposed to direct sunlight, the LCD TV may heat up and it may damage the LCD TV.
Ship and vessel
Do not install this LCD TV in a ship or vessel. If the LCD TV is exposed to seawater, it may cause fire or damage the LCD TV.
Cord arrangement
Arrange the power cords or
connecting cords in a safe place to avoid tripping on them.
Fall
Place the LCD TV on a secure, stable stand. Do not hang anything on the LCD TV. The LCD TV may fall from the stand or wall-mount bracket (not supplied), causing damage or serious injury.
Recommended place for the LCD TV
Place the LCD TV on a stable, level surface. Otherwise, it may fall and cause injury.
Continued
7 GB
Ventilation
Leave space around the LCD TV. Otherwise, adequate aircirculation may be blocked causing overheating and cause fire or damage the LCD TV.
When installing the LCD TV on the wall
30cm
10cm |
10cm |
Leave this space at least.
10cm
Never install the LCD TV as follows:
Air circulation is blocked.
Wall
When installing the LCD TV using a stand
30cm
10cm |
10cm |
15cm |
Leave this space at least.
Never install the LCD TV as follows:
Air circulation is blocked.
Wall
Power Sources
Overloading
This LCD TV is designed to operate on a 110-240V AC supply for the LCD TV. Take care not to connect too many appliances to the same AC power outlet as this could result in fire or electric shock.
AC power outlet
Do not use a poor fitting AC power plug. Insert the plug fully into the AC power outlet. If it is loose, it may cause arcing and result in fire. Contact your electrician to have the AC power plug changed.
When you disconnect the AC power cord, disconnect it from the AC outlet first.
For the TV set with a three-wire grounding type AC mains plug
This TV set with CLASS 1 construction must be connected to an AC mains socket outlet with a protective earthing connection.
Moisture
Do not touch the AC power cord with a wet hand. If you plug/unplug the AC power cord with a wet hand, it may cause electric shock.
Lightning storms
For your own safety, do not touch any part of the LCD TV, AC power cord or antenna lead during lightning storms.
AC power cord protection
Pull out the AC power cord by the plug. Do not pull on the AC power cord itself.
Wiring
Unplug the AC power cord when wiring cables. Be sure to unplug the AC power cord for your safety, when hooking up.
Cleaning
Clean the AC power plug regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate and result in fire. Unplug the AC power plug and clean it regularly.
Grounding
To avoid electric shock, be sure to connect the supplied AC power cord to a grounded power outlet.
If the plug fails to fit, contact your electrician to have the outlet changed.
8 GB
Use
Damage requiring service
If the surface of the LCD TV cracks, do not touch it until you unplug the AC power cord. Otherwise electric shock may result.
Servicing
Do not open the cabinet and the rear cover of the LCD TV. Refer to qualified service personnel only.
Ventilation holes
Do not insert anything in the ventilation holes. If metal or something flammable enters, it may result in fire or electric shock.
Moisture and flammable
• Do not let this LCD TV get wet.
Never spill liquid of any kind on the set. If any liquid or solid object does fall through, do not operate the LCD TV. It may
result in electric shock or damage
to the LCD TV. Have it checked immediately by qualified personnel.
• Do not place any objects on the
LCD TV. The LCD TV shall not
be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the LCD TV.
•To prevent fire, keep
inflammable objects or naked lights (e.g. candles) away from the LCD TV.
Additional Safety Information
Electric shock
Do not touch the LCD TV with a wet hand. Doing so may cause electric shock or damage the LCD TV.
Protruding location
Do not install the LCD TV in protruding locations. If you install the unit in the following locations, injury may result.
•Do not install the LCD TV in a location where the LCD TV protrudes, such as pillars.
•Do not install the LCD TV in a location where your face
may bump.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
Placement
Never place the LCD TV in hot, humid or excessively dusty places. Do not install the LCD TV where it may be exposed to mechanical vibrations. Do not use the LCD TV where insects may enter.
Oils
Do not install this LCD TV in restaurants that use oil. Dust absorbing oil may enter into the LCD TV and damage the LCD TV.
Accessories
Secure the LCD TV from falling down.
If the LCD TV is not secured properly, it may fall and cause injury. Take measures against it using the supplied stand or a wall-mount bracket (not supplied).
Broken pieces
Do not throw anything at the LCD TV. The screen glass may break by the impact and cause serious injury.
Corrosion
If you use this LCD TV near the seashore, salt may corrode metal parts of the LCD TV and cause internal damage or fire. It may also shorten the life of the LCD TV. If the LCD TV will be subjected to any of these conditions, steps should be taken to reduce the humidity and temperature of the area where the LCD TV is located.
Cleaning
Unplug the AC power cord when cleaning this LCD TV. If not, it may result in electric shock.
Continued
9 GB
AC power cord
If you damage the AC power cord, it may result in fire or electric shock.
• Do not pinch, bend, or twist the cable excessively. The core lines may be bared and cut, and cause shortcircuit, resulting in fire or electric shock.
•Do not convert or damage the AC power cord.
• Do not put anything heavy on the AC power cord. Do not pull the AC power cord.
•Keep the AC power cord away from heat sources.
•Be sure to grasp the plug when disconnecting the AC power cord.
If the AC power cord is damaged, stop using it and ask your dealer or Sony service center to exchange it.
Not in use
For environmental and safety reasons, it is recommended that the LCD TV is not left in standby mode when not in use. Disconnect it from the AC power outlet.
Cable wiring
Take care not to catch your feet on the cables. It may damage the LCD TV.
Installation
Do not install optional components too close to the LCD TV. Keep optional components at least 30 cm away from the LCD TV. If a VCR is installed in front or beside the LCD TV, the picture may distort.
Heat
Do not touch the surface of the LCD TV. It remains hot, even for some time after the LCD TV is turned off.
Precautions
On viewing the LCD TV comfortably
•To view the LCD TV comfortably, the recommended viewing position is from four to seven times of the screen’s vertical length away from the LCD TV.
•View the LCD TV in a moderate light room, as viewing the LCD TV in poor light taxes your eyes. And watching the screen continuously long times taxes your eyes, too.
On installing the LCD TV
•Use the specified wall-mount bracket or stands.
•Do not install the display unit in places subject to extreme temperature, for example in direct sunlight, or near a radiator, or heating vent. If the display unit is exposed to extreme temperature, the display unit may heat up and it may cause deformations of the casing or malfunctions.
•Do not install the display unit in a place exposed to direct air conditioning. If the display unit is installed in such a location, moisture may condense on the panel inside the display unit. It may cause a malfunction.
•After transporting the display unit directly from a cold to a warm location, or if the room temperature has changed suddenly, pictures may be blurred or show poor color over portions of the picture. This is because moisture has condensed on the panel inside the display unit. Let the moisture evaporate before using the display unit.
•To obtain a clear picture, prevent the lighting or sun light from illuminating the screen directly. If possible, install a lighting on the ceiling right above the LCD TV so that reflection of the lighting is minimized.
•The LCD TV is not disconnected from AC power outlet when the switch is in off position. To disconnect the LCD TV completely, pull the plug from AC power outlet.
•Make sure the LCD TV is completely switched off by pressing 1 on the TV (top side) before unplugging the AC power cord. Unplugging the AC power cord while LCD TV is switched on or at standby mode may cause the power and standby indicators to remain lit. This does not indicate a malfunction.
On adjustment volume
•Adjust the volume so as not to trouble neighbors. Sound carries very easily at night time. Therefore, closing the windows or using headphones is suggested.
•When using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result.
On handling the remote control
•Handle the remote control with care. Do not drop or step on it, or spill liquid of any kind.
•Do not place the remote control in a location near heat source, or in a place subject to direct sunlight, or in a damp room.
10 GB
On cleaning the screen surface/cabinet
•Be sure to unplug the AC power cord connected to the LCD TV from the AC power outlet before cleaning.
•To remove dust from the screen surface/cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution.
•Note that material deterioration or screen coating degradation may occur if the display unit is exposed to a volatile solvent, such as alcohol, thinner, benzine or insecticide, or if prolonged contact is maintained with rubber or vinyl materials.
•The ventilation holes can accumulate dust over time. To ensure proper ventilation, we recommend removing the dust periodically (once a month) using a vacuum cleaner.
On the screen
•Although the LCD screen is made with high-precision technology and has effective pixels of 99.99% or more, black dots may appear or bright points of light (red, blue or green) may appear constantly on the LCD screen. This is a structural property of the LCD panel and is not a malfunction.
•Do not expose the LCD screen surface to the sun. Doing so may damage the screen surface.
•Do not push or scratch the front filter, or place objects on top of this unit. The image may be uneven or the LCD panel may be damaged.
•If the unit is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena improve as the temperature rises.
•Ghosting may occur when still pictures are displayed continuously. It may disappear after a few moments.
•The screen and cabinet get warm when this unit is in use. This is not a malfunction.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol is on the remote control.
11 GB
Loading...