Konica Minolta bizhub 364e User Manual

bizhub 554e/454e/364e/284e/224e QUICK REFERENCE 1/4

How to use the system – Panel

Interrupt

Switch to Enlarge

a copy job

Open Help screen display mode

Login/logout

Switch to main

menu

Keypad KP-101

Status indicator

(option)

Voice Guide (not in use

for European market)

Input a value or a

number

Touch screen

Clear a value

Energy Safe

Proof one copy set

Mode on/off

Reset the settings

Switch to Scan/Fax function*

Stop a process

Switch to Copy function*

Display keypad*

Start a process

*This is a Register key. In the Administrator Settings it can be assigned to any function.

Touch screen – Main menu

Display total number of printed pages

Adjust the touch screen / configure touch screen operation

Message display

Change to the functions of the shortcut key

Display active or standby jobs

Toner supply indicator

Shortcut key area*

	*Up to 24 shortcut keys assigned to any function can be displayed here.	Configure settings/
		display use status
	By default, the main menu shows Copy, Scan/Fax, User Box, Sound Setting, and Utility. Utility is always displayed.

Operating the touch screen*

1.Tap to select or determine a menu.

2.Double-tap to retrieve detailed information or enlarge a thumbnail image.

6.Drag & Drop to move a document to the intended place.

7.Pan to move a displayed image.

3. Drag to move a display	8. Pinch-in/Pinch-out to
position on an application	enlage or reduce a preview
or preview screen.	image.

4. Flick to scroll an ad-	9. Rotate two fingers to rotate
dress or job list and feed	a preview image.
thumbnail-view pages.

5.Long-tap to display the icon related to the document.

*Available touch functions vary depending on displayed screen.

bizhub 554e/454e/364e/284e/224e QUICK REFERENCE 2/4

Operation of keypad*

1.Tap the numerals or the input area on the screen to display the keypad.

2.If necessary, touch the upper side of the keypad and drag it to another display position.

*If the system is equipped with the optional hardware keypad KP-101, it can be used instead.

Basic copy functions – Make a copy

1. Position the original(s).

2.Tap Copy in the main menu.

3.Tap the input area to display the keypad.

4.Type in the number of copies.

5. Press the Start key.

Zoom

1.Position the original(s).

2.Tap Zoom in the copy screen.

3.Make the desired settings.

4.Tap OK.

5.Press the Start key.

Automatically reduce/enlarge	Change zoom	Different values for X and Y
original size to paper size	manually	(distortion)

User defined zoom Copy the entire original (values can be changed)

including its edges by slightly

reducing the original size

Change user defined zoom values

Preset zoom values

Copy operations – Basic copy screen

Register a copy program		Display Quick Copy screen		Number of copy sets

Input/output image (only visible when originals are placed

on platen glass or document feeder)

Specify the type of the original

Create a booklet

Select paper size and type of the original/ change size and type of the paper loaded in paper trays

Specify a zoom ratio

Display job list

Check copy settings Check Finishing settings

Two times 7 copy functions can be set for each function bar*

Specify additional copy settings

Adjust the copy density

Specify Finishing settings

Specify Duplex/

Combine settings

*Available functions depend on system configuration.

Duplex/Combine

1.	Position the original(s).	Copy 2 - 8 document
2.	Tap Duplex/Combine in the copy	pages onto one page
	screen.

3.Make the desired settings.

4.Tap OK.

5.Press the Start key.

Select 1-sided or 2-sided copying

Select orientation of the original loaded into ADF or placed on the original glass

Specify binding positions for the original and the copies