Sony MHC-RV600D, MHC-RV900D, MHC-RV800D User Manual 2

4 (1)

4-241-538-12(1)

Mini Hi-Fi

Component

System

Operating Instructions

Owner’s Record

The model and serial numbers are located on the rear panel of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

 

 

 

 

 

 

Model No.

 

 

Serial No.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MHC-GX90D

MHC-RV900D

MHC-RV800D

MHC-RV600D

© 2002 Sony Corporation

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

The following caution label is located inside the apparatus.

This appliance is classified as a CLASS 1 LASER product. This label is located on the rear exterior.

Don’t throw away the battery with general house waste, dispose of it correctly as chemical waste.

This system incorporates Dolby* Digital, Pro Logic Surround, DTS**, and the DTS Digital Surround System.

*Manufactured under license from Dolby Laboratories.

“ Dolby” , “ Pro Logic” , and the double-D symbol are trademarks of Dolby Laboratories.

**Manufactured under license from Digital Theater Systems, Inc. “ DTS” and “ DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.

NOTICE FOR THE CUSTOMERS IN THE U.S.A.

This symbol is intended to alert the user to the presence of uninsulated “ dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

The use of optical instruments with this product will increase eye hazard.

As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

This label is located inside the apparatus.

2GB

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna. –Increase the separation between the equipment and

receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

NOTICE FOR THE CUSTOMERS IN CANADA

CAUTION

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

Except for European model

ENERGY STAR® is a U.S. registered mark.

As an ENERGY STAR® Partner, Sony Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

IMPORTANT NOTICE

Caution: This system is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time, you risk permanent damage to your television screen. Projection televisions are especially susceptible to this.

About this manual

The North American model is the model used for OSD (on-screen display) illustration purposes.

3GB

Table of Contents

List of Button Locations and

Reference Pages

Main unit ........................................................

8

Remote control ...............................................

9

Sub woofer

 

(MHC-GX90D and RV800D only) ......

10

Getting Started

 

Hooking up the system ................................

11

Inserting two R6 (size AA) batteries into the

remote ...................................................

16

Setting the clock ..........................................

16

DVD/VIDEO CD/CD/MP3

 

Playing discs

 

Loading a disc ..............................................

17

Playing a disc

 

Normal Play/Shuffle Play/

 

Slow-motion Play .................................

17

Creating your own program

 

Program Play ...................................

20

Resuming playback from the point

 

you stopped the disc

 

Resume Play ....................................

22

Playing repeatedly

 

Repeat Play ......................................

23

Playing a disc with MP3 audio tracks ..........

25

Playing DVDs using the menu ....................

26

Playing VIDEO CDs with PBC functions

 

(Ver. 2.0) — PBC Play .........................

27

Setting up for DVD/VIDEO CD/CD/MP3

Using the Setup Display ..............................

28

Setting the display or sound track language

 

LANGUAGE SETUP ......................

29

Settings for the display

 

SCREEN SETUP .............................

29

Custom settings

 

CUSTOM SETUP ...........................

30

Speaker settings

 

SPEAKER SETUP ..........................

31

Sound adjustment

 

Changing the sound .....................................

34

Enjoying movies

 

Searching for a title/chapter/track/index ......

36

Changing the angles (DVD only) ................

37

Displaying the subtitles (DVD only) ...........

38

Using various additional functions

 

Locking discs

 

CUSTOM PARENTAL CONTROL/

PARENTAL CONTROL .....................

38

Tuner

 

 

Presetting radio stations ...............................

43

Listening to the radio

 

Preset Tuning ...................................

44

Manual Tuning ................................

45

Using the Radio Data System (RDS)

 

(European model only) .........................

45

Tape

 

 

Loading a tape ..............................................

47

Playing a tape ...............................................

47

Recording to a tape

 

CD Synchro Recording/Recording

 

Manually/Program Edit ........................

48

Timer-recording radio programs ..................

50

4GB

Sound Adjustment

 

Adjusting the sound .....................................

51

Selecting the sound effect ............................

51

Adjusting the graphic equalizer and

 

storing ...................................................

52

Using the sub woofer

 

(MHC-GX90D and RV800D only) ......

53

Selecting the surround effect .......................

53

Display

 

Turning off the display

 

Power Saving Mode .........................

53

Viewing information about the disc ............

54

Other Features

 

Enhancing video game sound

 

Game Sync .......................................

56

Mixing video game sound with other sound

 

source

 

Game Mixing ...................................

56

Changing the spectrum analyzer display .....

57

Adjusting the brightness of the indicators ...

57

Singing along: Karaoke (MHC-RV900D and

RV600D only) ......................................

57

Falling asleep to music

 

Sleep Timer ......................................

59

Waking up to music

 

Daily Timer ......................................

59

Optional Components

 

Hooking up optional components ................

61

Listening to audio from a connected

 

component ............................................

62

Recording on a connected component .........

63

Recording audio from a connected

 

component ............................................

63

Troubleshooting

 

Problems and remedies ................................

64

Messages ......................................................

68

Self-diagnosis function ................................

69

Additional Information

 

Precautions ...................................................

69

Specifications ...............................................

71

Glossary .......................................................

74

Language code list .......................................

77

Control Menu item list .................................

78

Setup Display item list .................................

79

5GB

This system can play the

following discs

DVD VIDEOs

Audio CDs

VIDEO CDs

Disc logo

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Contents Audio + Video

Audio

Audio +

 

 

 

Video

The “ DVD VIDEO” logo is a trademark.

Discs that this system cannot play

CD-ROMs (PHOTO CDs included)

CD-Rs/CD-RWs other than those recorded in the following formats:

–music CD format –video CD format

–MP3 format that conforms to ISO9660* Level 1/Level 2, or its extended format, Joliet

Data part of CD-Extras

DVD-ROMs

DVD Audio discs

*A logical format of files and folders on CD-ROMs, defined by ISO (International Standard Organization)

The system also cannot play the following discs:

A DVD with a different region code.

A disc that has a non-standard shape (e.g., card, heart).

A disc with paper or stickers on it.

A disc that has the adhesive, cellophane tape, or a sticker still left on it.

Note

Some CD-Rs/CD-RWs or DVD-Rs/DVD-RWs cannot be played on this system depending upon the format or the recording quality or physical condition of the disc, or the characteristics of the recording device.

Furthermore, the disc will not play if it has not been correctly finalized. For more information, see the operating instructions for the recording device.

Region code of DVDs you can play on this system

Your system has a region code printed on the back of the unit and will only play DVDs labeled with identical region code.

DVDs labeled ALL will also be played on this system.

If you try to play any other DVD, the message “ Playback prohibited by area limitations.” will appear on the TV screen.

Depending on the DVD, no region code indication may be labeled even though playing the DVD is prohibited by area restrictions.

X Region code

MODEL NO. HCD-RVXXXX

DVD DECK RECEIVER

AC: 00V 00Hz 00W

SERIAL NO:

Note on playback operations of DVDs and VIDEO CDs

Some playback operations of DVDs and VIDEO CDs may be intentionally set by software producers. Since this system plays DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVDs or VIDEO CDs.

6GB

Note on VIDEO CDs

This system conforms to VIDEO CDs without PBC* functions (Ver. 1.1) and VIDEO CDs with PBC functions (Ver. 2.0) of VIDEO CD standards. You can enjoy two kinds of playback according to the disc type.

Disc type

You can

VIDEO CDs

Enjoy video playback (moving

without PBC

pictures) as well as audio CDs.

functions

 

(Ver. 1.1 discs)

 

 

 

VIDEO CDs

Play interactive software using

with PBC

menu screens displayed on the TV

functions

screen (menu playback), in

(Ver. 2.0 discs)

addition to the video playback

 

function of VIDEO CDs without

 

PBC functions.

 

Moreover, you can play high or

 

standard quality still picture.

 

 

* PBC = Play Back Control

Notes on CD-R and CD-RW discs

Type of discs Label on the disc

Audio CD

MP3 files

Discs recorded on CD-R/CD-RW drives may not be played back because of scratches, dirt, recording condition or the drive’s characteristics.

You cannot play a CD-R/CD-RW that is not finalized.

Playback of multi-session CD-R/CD-RWs recorded as Audio CDs is not supported.

Copyrights

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents, other intellectual property rights owned by Macrovision Corporation, and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

7GB

Sony MHC-RV600D, MHC-RV900D, MHC-RV800D User Manual 2

List of Button Locations and Reference Pages

How to use this page

Illustration number

r

 

Use this page to find the location of buttons and other

TUNER/BAND ef (43, 44)

parts of the system that are mentioned in the text.

R

R

 

Name of button/part

Reference page

Main unit

ALPHABETICAL ORDER

A – J

ALBUM+/–ws (19, 20, 26) AUDIO jacks wl (61)

CD SYNC ql (48, 50) Deck A wg (47)

Deck B qk (47, 48, 49, 50, 58) DIRECTION 8 (47, 48, 50, 58) DISC 1 –3 qs (18, 19, 20)

DISC SKIP/EX-CHANGE qd (17, 19, 23)

Disc tray qa (17)

DISPLAY 8 (45, 53, 54, 55) DVD eg (18, 20, 26, 27, 36, 48,

49)

DVD DISPLAY q; (18, 24, 34, 36, 37, 38, 41, 55)

DVD MENU 8 (26) DVD TOP MENU 8 (26)

ECHO LEVEL control*1 wk (58) EFFECT ON/OFF 4 (51, 52) ENTER qf (16, 18, 20, 24, 26, 27,

34, 36, 37, 38, 43, 46, 49, 50, 52, 55, 57, 59)

FM MODE 8 (45) GAME ea (56, 61) GAME EQ wd (51)

GAME MIXING wf (56) GROOVE 3 (51)

K – Z

KARAOKE PON*1 2 (57) MD (VIDEO)*2 es (62) MIC jack*3 wj (57)

MIC LEVEL control*3 wk (57) MOVIE EQ 9 (51)

MUSIC EQ 6 (51) P FILE wa (52) PHONES jack qh

PLAY MODE 8 (18, 20, 49) PTY*4 8 (46)

REC PAUSE/START w; (48, 50, 58)

REPEAT 8 (23) SURROUND*5 5 (53) TAPE A/B ed (47, 48, 58) TUNER MEMORY 8 (43) TUNER/BAND ef (43, 44) VIDEO jack e; (61) VIDEO (MD)*6 es (62)

VOLUME control qg (33, 53, 59)

12 34567 8

eg ef ed es ea

e; wl

wk wj

wh wg

8GB

wf wd

ws

BUTTON DESCRIPTIONS

?/1 (power) 1 v/V/b/B 7

ZOPEN/CLOSE qd

ZPUSH (deck B) qj

m/M + ws hHws

./>ws

Xws xws

ZPUSH (deck A) wh

*1 MHC-RV900D (except for Latin American model) and RV600D (except for Latin American model) only

*2 except for MHC-GX90D

*3 MHC-RV900D and RV600D only

*4 European model only *5 MHC-RV600D only *6 MHC-GX90D only

90 qa

qs

qd qf

qg

qh

qj qk

waw;ql

rf rg rs rdra
r;
ek el eh ej
eg
ef
eaed ese; wl
wk wj
39, 41) qk (19)

Remote control

ALPHABETICAL ORDER

A – M

ALBUM +/–wd wl (19, 20, 26) AMP MENU wa (57)

ANGLE w; (37) AUDIO ed (35)

CLEAR qf (20, 22, 24, 31) CLOCK/TIMER SELECT 2

(51, 60)

CLOCK/TIMER SET 3 (16, 50, 59)

DISC +/–wg wj (19, 20, 23) DISPLAY qa (45, 53, 54, 55) DVD rd (18, 20, 21, 26, 27, 28,

36, 48, 49)

DVD DISPLAY qd (18, 24, 34, 36, 37, 38, 41, 55)

DVD MENU ef (26)

DVD SETUP ek (28, 33, 40) DVD TOP MENU ef (26) EFFECT ON/OFF es (51, 52) ENTER wk (16, 18, 20, 21, 24,

26, 27, 28, 33, 34, 36, 37, 38, 40, 43, 46, 49, 50, 52, 55, 57, 59)

GAME 8 (56, 61) GAME EQ e; (51) GAME MIXING 0 (56) GROOVE es (51)

MD (VIDEO) 9 (62) MOVIE EQ e; (51) MULTI ROOM* ea MUSIC EQ e; (51)

N – Z

NEXT eh (18, 27)

Number buttons qs (19, 27, 39, 40, 42, 49)

P FILE ws (52)

PLAY MODE ra (18, 20, 21, 49) PRESET +/–eh (43, 44)

PREV eh (18, 27)

REPEAT r; (23) RETURN O ej

SCAN/SLOW

SLEEP 1 (59) SUBTITLE ql (38) SURROUND es (53) TAPE rf (47, 48) TUNER/BAND rs (43, 44) TUNING +/–eg (43, 45) TV ?/1 4 (15)

TV CH +/–rg (15) TV/VIDEO 7 (15) TV VOL +/–6 (15)

VOL +/–wf (33, 53, 59)

BUTTON DESCRIPTIONS

?/1(power) 5 xqg

nN qh

Xqj

M/m/</, wh meg

Meg

.eh > eh

>10* el

* This button does not function.

of List Locations Button

Reference and Pages

1 2 3 4 5

6

7 8

0 9 qa qs qd

qf

qgqj qh

qlwa qkw;

ws wd

wf

wg

wh

9GB

Sub woofer

(MHC-GX90D and RV800D only)

ALPHABETICAL ORDER

A – Z

Indicator 1 (53)

ON/OFF 2 (53)

1

2

10GB

Getting Started

Hooking up the system

Perform the following procedures 1to 9to hook up your system using the supplied cords and accessories.

 

AM loop antenna

 

FM antenna

Rear speaker

Rear speaker

(Right)*1

(Left)*1

 

Center speaker*1

2

2

 

6

5

7

 

2 3

4

 

4

 

1

8

Front speaker (Right)

Front speaker (Left)

Sub woofer*2

*1 except for MHC-RV600D

*2 MHC-GX90D and RV800D only

continued

Started Getting

11GB

Hooking up the system (continued)

1Connect the front speakers.

Connect the speaker cords to the FRONT SPEAKER jacks as shown below.

Insert only the stripped portion

+

 

 

Gray/Solid

 

(3)

 

R

L

 

Black/Stripe (#)

2Connect the rear speakers. (except for MHC-RV600D)

Connect the speaker cords to the REAR SPEAKER jacks as shown below.

Insert only the stripped portion

+

R

L

 

 

 

Gray/Solid (3)

Black/Stripe (#)

3Connect the center speaker. (except for MHC-RV600D)

Connect the speaker cords to the CENTER SPEAKER jacks as shown below.

Insert only the stripped portion

+

R

L

 

 

 

Gray/Solid (3)

Black/Stripe (#)

4Connect the sub woofer speaker. (MHC-GX90D and RV800D only)

Connect the speaker cords to the SUB WOOFER jack and SUB WOOFER CONTROL jack as shown below.

SUB WOOFER jack

SUB WOOFER CONTROL jack

5Connect the FM/AM antennas.

Set up the AM loop antenna, then connect it.

Jack type A

 

 

 

Extend the FM lead antenna

AM loop antenna

horizontally

 

 

F

 

 

M

 

 

7

 

 

5

 

A

 

 

M

 

Jack type B (MHC-RV800D only)

Extend the FM lead antenna horizontally

AM loop antenna

FM75

COAXIAL

AM

12GB

6Connect the video input jack of your TV to the VIDEO OUT jack with the supplied video cable.

MONITOR

 

OUT

S VIDEO

 

(DVD

 

ONLY)

VIDEO

 

When using a TV

Turn on the TV and select the video input so that you can view the pictures from this system.

Tip

For even higher quality video images, you can use an optional S-video cable to connect the S VIDEO input jack on your TV to the S VIDEO OUT jack (DVD only).

7For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage.

Depending on the model, the VOLTAGE SELECTOR may differ.

VOLTAGE SELECTOR

120V* 220V 230-240V

* Saudi Arabian model: 120 – 127 V

8Connect the power cord to a wall outlet.

The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends.

If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter).

9(Except for Pan-American and European models)

Set the color system to PAL or NTSC depending on the color system of your TV.

The color system is factory set to NTSC for region code 3 models, and PAL for other region code models. Each time you perform the procedure below, the color system changes as follows:

NTSC yPAL

Use the buttons on the system.

1 Press ?/1 to turn off the system.

2Press ?/1 while holding down X.

The system turns on and the color system is changed.

Notes

You cannot set the color system in the Power Saving Mode.

When you play back a VIDEO CD recorded in a different color system from the one you set to the unit, the picture image may be distorted.

To connect optional components

See page 61.

continued

Started Getting

13GB

Hooking up the system (continued)

To attach the speaker pads

Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping.

Front speaker (Left (4)/Right (4))

Sub woofer*1 (4)

Center speaker (2)

Speaker pads are not supplied for the rear speakers.

Notes

Keep the speaker cords away from the antennas to prevent noise.

The type of speakers supplied vary according to the model you purchased (see “Specifications” on page 71).

Do not place the rear speakers on top of a TV.*2 This may cause distortion of the colors in the TV screen.

Be sure to connect both left and right rear speakers.*2 Otherwise, the sound will not be heard.

*1 MHC-GX90D and RV800D only *2 except for MHC-RV600D

Positioning the speakers (except for MHC-RV600D)

1 Place the front speakers at an angle of

45 degrees from your listening position.

 

Center speaker

Front

Front

speaker

speaker

(L)

(R)

 

Sub woofer

Rear

Rear

speaker

speaker

(L)

(R)

2 Place the center speaker at about the same height as the front speakers. Align the center speaker with the front speakers or place it slightly behind the front speakers.

3 Place the rear speakers facing each other at about 60 to 90 cm above your listening position.

Rear speaker

60 to 90 cm

14GB

Placing the sub woofer (MHC-GX90D and RV800D only)

Since the human ear cannot detect the direction and position where the bass sound being reproduced by a woofer (below 150 Hz) comes from, you can place the woofer wherever you like in your room. To obtain a better bass reproduction, we recommend you to place the woofer on a solid floor where resonance is unlikely to occur.

Tip

You can enjoy 5.1 channel surround sound while playing a DVD. To adjust the speaker volume and level, see page 33.

Notes

Always place the woofer vertically, keeping it a few centimeters away from the wall.

If the woofer is placed in the center of a room, the bass could be extremely weakened. This is due to the influence of the standing wave of the room. If this happens, move the woofer away from the center of the room or eliminate the cause of the standing wave, by placing a bookshelf against the wall, etc.

Using the remote

You can use the buttons shown below to operate a Sony TV.

To Press

Turn the TV on or off

TV ?/1

Getting

 

 

 

 

Switch the TV’s video

TV/VIDEO

 

input

 

 

 

 

 

Change the TV

TV CH + or –

Started

channels

 

 

 

 

 

 

Adjust the volume of

TV VOL + or –

 

the TV speaker(s)

 

 

 

 

 

When carrying this system

Perform the following procedure to protect the DVD mechanism.

1Press ?/1 to turn on the system, then press DVD. Make sure that all discs are removed from the system.

2Hold down DVD, then press ?/1 until

“STANDBY” appears.

When you release the buttons, “LOCK” appears.

3Unplug the power cord.

15GB

Press CLOCK/TIMER SET on the remote.

Inserting two R6 (size AA)

batteries into the remote

e

E Ee

Tip

With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.

Setting the clock

1 Press ?/1 to turn on the system.

2

3 Press M or m on the remote repeatedly to set the hour.

4 Press , on the remote.

The minute indication flashes.

5 Press M or m on the remote repeatedly to set the minute.

6 Press ENTER.

The clock starts working.

To adjust the clock

1Press CLOCK/TIMER SET on the remote.

2Press M or m on the remote repeatedly to select “CLOCK SET”, then press ENTER.

3Do the same procedures as step 3 to 6 above.

Note

The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

16GB

DVD/VIDEO CD/CD/MP3

Playing discs

Loading a disc

You can also load and play discs with MP3 audio tracks. See “ Playing a disc with MP3 audio tracks” on page 25 for MP3.

1 Press Z OPEN/CLOSE.

The disc tray opens.

2 Place a disc with the label side up on the disc tray.

To insert additional discs, press DISC SKIP/EX-CHANGE to rotate the disc tray.

3 Press Z OPEN/CLOSE to close the disc tray.

Playing a disc

— Normal Play/Shuffle Play/Slowmotion Play

You can play up to three discs (DVD, VIDEO CD, CD or MP3) in a row. Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with the disc.

When playing a DVD:

Disc tray

Title Chapter number

number

number

Playing time

 

 

 

 

 

 

 

 

Disc presence indicator

When playing a VIDEO CD:

Disc tray

Playing time

number Track number

Disc presence indicator

When playing a CD:

Disc tray

number Track number Playing time

Disc presence indicator

continued

CD/CD/MP3 DVD/VIDEO

17GB

Playing a disc (continued)

When playing MP3 audio tracks:

Disc tray

number Track number Playing time

Disc presence indicator

1 Turn on your TV and select the video input.

Refer to the operating instructions supplied with your TV if you need help.

2 Press DVD.

3 Press PLAY MODE repeatedly in stop mode until the mode you want appears in the display.

Select

To play

ALL DISCS

All discs in the disc tray

(Normal Play)

continuously.

 

 

1DISC

The tracks on the disc you

(Normal Play)

have selected in original

 

order.

 

 

ALBM

All MP3 audio tracks in the

(Normal Play)

album on the disc you have

 

selected in original order.

 

 

ALL DISCS

The tracks on all discs in

SHUF

random order.

(Shuffle Play)*

 

 

 

1DISC SHUF

The tracks on the disc you

(Shuffle Play)*

have selected in random

 

order.

 

 

ALBM SHUF

The MP3 audio tracks in the

(Shuffle Play)*

album on the disc you have

 

selected in random order.

 

 

PGM

The tracks on all discs in the

(Program Play)*

order you want them to be

 

played (see “Creating your

 

own program” on page 20).

 

 

*You cannot perform Shuffle Play and Program Play with DVDs.

4 Press one of the DISC 1 – 3 buttons.

If you press hH(or nNon the remote) when DVD function is selected and the disc tray is closed, playback starts from the selected disc.

Tip

You can change the play mode between 1 DISC, ALL DISCS and ALBM using the on-screen display as follows:

1Press DVD DISPLAY in stop mode. The Control Menu appears.

2Press vor V(or M or m on the remote) to select “PLAY MODE”, then press ENTER.

3Press vor V(or M or m on the remote) to select desired play mode, then press ENTER.

Notes

“ALBM” or “ALBM SHUF” appears even if you have selected a non-MP3 disc or MP3 disc with no albums. In this case, the disc is played in the “1DISC” or “1DISC SHUF” play mode, respectively.

You cannot perform “1DISC SHUF” and “ALBM SHUF” with DVDs.

Other Operations

To

Do this

Stop play

Press x.

 

The playback stops at the point x

 

is pressed (Resume Play). Press x

 

again to cancel the Resume Play

 

(see page 22).

 

 

Pause

Press X*1.

 

Press again to resume play.

 

 

Select a track or

During play or pause, press >

chapter

(or NEXT on the remote) (to go

 

forward) or .(or PREV on the

 

remote) (to go back).

 

 

Find a point

Press Mor mduring play.

in a track or

At the desired point, press hH

chapter

(or nNon the remote) to stop

(Lock Search*2)

searching and start playback. For

 

DVDs or VIDEO CDs, each time

 

you press Mor m, the speed

 

changes as follows:

 

1 (slow) y 2 (faster than 1)

 

 

18GB

To

Do this

 

Select an album

Press ALBUM – or + repeatedly

of MP3

after step 3.

 

 

 

Change the

During pause, press SCAN/SLOW

playback speed*1

or

*3 on the remote. Each

(Slow-motion

time you press the button, the

Play) (DVD/

speed switches between two

VCD only)

slowed play speeds. To return to

 

Normal Play, press hH(or

 

nNon the remote).

 

 

Select a disc in

Press one of the DISC 1 – 3

stop mode

buttons or DISC SKIP/EX-

 

CHANGE (or DISC +/– on the

 

remote).

 

 

 

Switch to DVD

Press one of the DISC 1 – 3

function from

buttons (Automatic Source

another source

Selection).

 

 

 

Exchange other

Press DISC SKIP/EX-CHANGE.

discs while

 

 

playing

 

 

 

 

Remove a disc

Press ZOPEN/CLOSE.

 

 

 

*1

There may be some disturbance in the video

 

image.

 

*2

except for MP3

 

*3

When playing a VIDEO CD, you can only scan

 

with SCAN/SLOW

. Pressing the button

repeatedly does not change the speed.

Notes

Depending on the DVD or VIDEO CD, some operations may be prohibited.

2 channel sound is heard when using headphones (MHC-GX90D and RV800D only).

Playing a track by entering the track number (on the remote only)

Press the number button(s) on the remote to enter the track number of the track you want to play. (To enter the MP3 track number, press ALBUM – or + repeatedly to select the desired album before entering the number.)

To enter a track number over 10

1 Enter the corresponding digits. To enter 0, press 10/0.

2 Press ENTER.

Example:

To play track number 30, press 3 and 10/0, then press ENTER.

To play MP3 track number 100, press 1, 10/0 and 10/0, then press ENTER.

CD/CD/MP3 DVD/VIDEO

19GB

Creating your own program

— Program Play

You can make a program of up to 25 steps from all discs except DVD in the order you want them to be played.

Using the front panel display

1 Press DVD.

2 In stop mode, press PLAY MODE repeatedly until “ PGM” appears in the display.

3 Press one of DISC 1 –3 (or DISC + or – on the remote) to select a disc.

4 Press . or > until the desired track appears in the display.

 

Total number of

 

programed steps

Disc tray number

(including selected track)

 

 

 

 

 

 

Selected track number

5 Press ENTER.

The track is programed.

6 Program additional discs or tracks.

To program

Repeat steps

Other tracks on the

4 and 5

same disc

 

 

 

Other tracks on other

3 to 5

discs

 

 

 

7 Press hH (or nN on the remote).

Other Operations

To

Do this

Cancel Program

Press PLAY MODE repeatedly

Play

until “ PGM” and “ SHUF”

 

disappear.

 

 

Clear a track from

Press CLEAR on the remote in

the end of program

step 2.

 

 

To program MP3 audio tracks

After step 3, press ALBUM –or + repeatedly until the album you want appears, and then go to step 4.

Tip

The program you made remains in the system’s memory even after Program Play finishes. To play the same program again, press DVD, then press hH (or nN on the remote).

20GB

Using the on-screen display

Use the remote for the operation.

1 Press DVD.

2 In stop mode, press PLAY MODE repeatedly until “ PGM” appears in the display.

The Program Display appears on the screen.

Program

1

2

3

4

5

6

7

8

9

10

3 Press ,, then press M or m repeatedly to select the disc.

Program

1

Disc

 

2

 

 

DISC 1

(CD)

3

DISC 2

(– – – – –)

4

DISC 3

(MP3)

5

 

 

6

 

 

7

 

 

8

9

10

4 Press ,.

The cursor moves to the album or track (in this case, “ DISC 1” ).

Program

1Disc Track

2* DISCALL1 (CD)TRACKS

3DISC 21.(–TRACK1– – – –)

4DISC 32(MP3). TRACK2

53. TRACK3

64. TRACK4

75. TRACK5

86. TRACK6

97. TRACK7

108. TRACK8

9. TRACK9

*“ ?” appears when the system has not loaded the disc information in the memory.

5 Select the album, or track you want to program.

x When programing a VIDEO CD or CD

For example, select track “ 6” .

Press M/m or the number buttons to select “ 6” , then press ENTER.

 

Selected track

 

 

 

 

Program

 

 

1 DISC 1 (CD)

– TRACK 6

 

2

3

4

5

6

7

8

9

10

x When programing MP3

For example, select track “ 3” of album “ 2” . Press M/m or the number buttons to select “ 2” , then press ,.

 

 

 

 

 

1

 

 

 

Disc Album

 

2

DISC 1

(CD)

 

3

ALLTrackALBUMS

 

DISC

2

(– – – – –)

 

4

ROOTALL TRACKS

 

DISC

3

(MP3)

 

Program

1. Classic

 

5

2. Jazz

6

3. Pops

7

 

8

 

9

 

10

 

Next, M/m or the number buttons to select “ 3” , then press ENTER.

Selected album and track

Program

 

1 DISC 3 (MP3) – ALBUM2

– TRACK3

2

3

4

5

6

7

8

9

10

continued

CD/CD/MP3 DVD/VIDEO

21GB

Creating your own program (continued)

6 To program other discs, albums, or tracks, repeat steps 3 to 5.

7 Press nN.

Program Play starts.

Other Operations

To

Do this

Return to

Press CLEAR during playback.

normal playback

 

 

 

Turn off the

Press PLAY MODE when the

Program Display

Program Play is stopped.

 

 

Clear a track

Press CLEAR in step 2.

from the end of

 

program

 

 

 

Tip

The program you made remains in the system’s memory even after Program Play finishes. Press nNto play the same program again.

Note

When you switch the play mode to “ PGM” while “ REP 1” is selected, “ REP 1” is automatically canceled.

Resuming playback from the point you stopped the disc

— Resume Play

The system memorizes the point where you stopped the disc so that you can resume from that point. Resume Play is not canceled when you turn off the system.

1 While playing a disc, press x to stop playback.

RESUME” appears in the display. If

RESUME” does not appear, Resume Play is not available.

2 Press hH (or nN on the remote).

Playback starts from the point you stopped the disc in step 1.

To play from the beginning of the disc

When “ RESUME” appears in the display, press x, then press hH(or nN on the remote).

For a disc containing MP3 audio tracks, press x one more time to return to the first album.

22GB

Notes

Depending on where you stopped the disc, the player may resume playback from a different point.

Resume Play is canceled when:

–you press the number buttons, PLAY MODE, x, DISC SKIP/EX-CHANGE (or DISC +/–on the remote) or ./>.

–you remove the disc.

–you unplug the system’s power cord.

Playing repeatedly

— Repeat Play

You can repeatedly play all the titles/tracks/ albums or a single title/chapter/track/album on a disc.

In Shuffle or Program Play mode, the system repeats the titles or tracks in the shuffled or programed order.

Using the front panel display

Press REPEAT during play until “ REP” or “ REP 1” appears.

REP: For all the tracks on the disc up to five times.

REP 1: For a single track only.

To cancel Repeat Play

Press REPEAT repeatedly until “ REP” and “ REP 1” disappear.

Tips

You cannot select “ REP” and “ ALL DISCS SHUF” at the same time.

When you select “ REP 1” , that track is repeated endlessly until “ REP 1” is canceled.

Note

You cannot perform Repeat Play during PBC playback of VIDEO CDs (see page 27).

continued

CD/CD/MP3 DVD/VIDEO

23GB

Playing repeatedly (continued)

Using the on-screen display

Use the remote for the operation.

1 Press DVD DISPLAY.

The Control Menu appears.

2 Press v or V repeatedly to select “REPEAT”, then press ENTER.

3 Select the Repeat Play setting.

xPlaying a DVD

OFF: does not play repeatedly.

ALL: repeats all the titles.

TITLE: repeats the current title on a disc.*

CHAPTER: repeats the current chapter.

xPlaying a VIDEO CD/CD when Program Play is set to OFF

OFF: does not play repeatedly.

ALL: repeats all the tracks on a disc.

TRACK: repeats the current track.*

xPlaying MP3 when Program Play is set to OFF

OFF: does not play repeatedly.

ALL: repeats all the tracks on a current disc, or all the tracks in a current album when “CONTINUE (ALBUM)” is selected.

TRACK: repeats the current track.

xWhen Program Play is set to ON

OFF: does not play repeatedly.

ALL: repeats Program Play.

*When “ALL DISCS SHUFFLE” is selected, you can select the Repeat Play of “TITLE”, “CHAPTER” or “TRACK” only.

To cancel Repeat Play

Press CLEAR.

Tips

You can set Repeat Play when the playback is stopped. After selecting the “REPEAT” item, press nN to start Repeat Play.

You can quickly display the “REPEAT” status. Press REPEAT.

Notes

You cannot perform Repeat Play during PBC playback of VIDEO CDs (see page 27).

You can perform Repeat play for DVD titles that contain chapters.

If you select ALL repeat, the program is repeated up to 5 times.

24GB

Loading...
+ 56 hidden pages