®
®
How to get a great shave
from your Remington® MicroScreen®2
®
Thank you for buying this premium shaver from Remington®
Inside you’ll find tips on using and caring for your shaver to get the best shave possible.
Model Numbers
MS2-90
MS2-100
MS2-200
MS2-300
MS2-400
IMPORTANT SAFETY
INSTRUCTIONS
When using an electric shaver, basic precautions should always be observed,including the following.Read all instructions before using this shaver.
DANGER
To reduce the risk of electric shock:
■Do not reach for a shaver that has fallen into water. Unplug immediately.
■Do not use while bathing or in the shower.
■Do not place or drop into water or other liquid.
■Do not place or store shaver where it can fall or be pulled into a tub or sink.
■Except when charging,always unplug this shaver from the electrical outlet immediately after using.
■Unplug this shaver before cleaning.
WARNING
To reduce the risk of burns, fire, electric
shock, or injury to persons:
■A shaver should never be left unattended when plugged in, except when recharging your rechargeable shaver.
■Close supervision is necessary when this shaver is used by, on,or near children or invalids.
■Use this shaver only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
■Keep the cord away from heated surfaces.
■Never operate this shaver if it has a damaged cord
or plug,or if it is not working properly, if it has been dropped or damaged,or dropped into water.Return the shaver to a service center for examination and repair.
■Never drop or insert any object into any opening on
the shaver.
■Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
■Do not use this shaver with a damaged or broken screen or cutter, as facial injury may occur.
■Always attach plug to shaver, then to outlet. To disconnect, turn all controls to "Off", then remove plug from outlet, then detach power cord from the shaver for storage.
■Always store your shaver and cord in a moisture-free area. Make sure your cord is disconnected from the shaver.
■Do not plug or unplug shaver when hands are wet.
■For household use only.
SAVE THESE
INSTRUCTIONS
Getting a Close, Comfortable Shave |
|
|
Always use a clean,dry shaver. |
|
Congratulations on your purchase of a premium |
|
|
|
|
Remington® MicroScreen®2 TCT® Shaver. Your new |
|
|
|
|
Remington® MicroScreen®2 is the only one with Total |
|
|
|
|
Closeness Technology™(TCT®). TCT® combines two |
|
|
|
|
super-flexing screens with a specially designed |
|
|
|
|
Intercept Trimmer™ that shaves even the most difficult |
|
|
|
|
parts of your face, including your neck, incredibly |
12 |
|
Wait at least 15 minutes after getting up |
|
close.The Intercept Trimmer™ works in tandem with |
9 |
3 |
before shaving, to ensure the face is free |
|
the screens to first cut the difficult longer hairs that |
of puffiness that may be present from |
|||
|
|
|||
then allows the screens to shave the shorter hairs |
6 |
|
sleeping. |
|
|
|
|
||
even closer. |
|
|
|
|
|
|
|
||
As with every shaver, your shave will improve over |
|
|
Make sure your face is clean and dry |
|
time. So allow about three weeks to develop an |
|
|
||
effective shaving style and for your beard to adjust |
|
|
before starting. |
|
to the new shaver. The adaptation period may take |
|
|
|
|
a little longer if your skin is sensitive, or if you |
|
|
|
|
alternate between shaving methods. |
|
|
|
|
|
|
|
When you first removed your MicroScreen ®2 TCT® Shaver from its box, you may have noticed what appears to be small particles of white or gray powder on the screen or in or around the cutter assembly. The particles are from a coating of a special lubricant applied to the new screens and cutters to help smooth the transition to your new shaver. They will disappear with use.
The Best Technique
It’s simple to get a great shave from your new shaver. Here are a few tips for getting the closest shave possible:
Hold the shaver so the two screens touch your face together. This allows the shaver to work the way it was designed for the closest shave and minimum screen wear. Avoid holding the shaver at an angle so only one screen touches the skin. This will distort the screen and may cause some skin irritation.
Use short, circular strokes. Use your free hand to stretch your skin. This encourages your whiskers to stand out, making it easier for them to enter the cutting chamber.
Never press hard. Pressing hard only flattens your whiskers, which makes it harder for them to enter the cutting chamber. It will also wear out the foils more quickly.
Your Remington® MicroScreen®2 TCT® Shaver is equipped with a special Intercept Trimmer™ that allows you to shave long hairs on facial and neck areas, or trim a beard or mustache quickly
and easily.
For shaving longer hairs,use Trimmer setting #2.(Press left side of trimmer button).
For shaving sideburns/mustache,use Trimmer setting #3.(Press right side of trimmer button).
To extend battery life, retract the trimmer to setting #1 while you are shaving.
For a Better Shave…
To help maximize your shaver’s performance, consider using the Remington® Pre-Shave Powder Stick (SP-5) or the Remington® PreShave Lotion with Aloe (SP-6). Just rub over your beard. Both products absorb moisture and facial oils, helping set up the hairs so they enter the cutting chamber more easily. They make shaving quicker and more comfortable.
Loading...