Installation Manual
5.8 GHz Additional Digital Cordless Handset
Model No. KX-TGA430
Thank you for purchasing a new Panasonic digital cordless phone.
This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone:
KX-TG4321
You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base unit’s operating instructions for further details.
Charge the batteries for about 7 hours before initial use.
Please read this installation manual before using the unit and save it for future reference.
For assistance, visit our website: http://www.panasonic.com/help for customers in the U.S.A. or Puerto Rico.
PNQX1002YA DC1107PW1127
Supplied accessories
Accessory item/Order number |
Quantity |
Charger/PNLC1001ZB |
1 |
|
|
AC adaptor for charger/PQLV209T |
1 |
|
|
Rechargeable batteries*1 |
2 |
Handset cover*2/PNYNTGA430BR |
1 |
*1 Please read the base unit's operating instructions for replacement battery information.
*2 The handset cover comes attached to the handset.
Note:
LPlease read the base unit’s operating instructions for additional/ replacement accessories.
Sales and support information
LTo order additional/replacement accessories, call 1-800-332-5368. LTTY users (hearing or speech impaired users) can call 1-866-605-
1277.
Connection
(120 V AC,
60 Hz)
Hooks
Note:
LUse only the supplied Panasonic AC adaptor PQLV209.
LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)
2 For assistance, please visit http://www.panasonic.com/help
Battery installation and battery charge
Important:
LUse the supplied rechargeable batteries (Part No. HHR-65AAABU). LWhen installing the batteries:
–Wipe the battery ends (S, T) with a dry cloth.
–Avoid touching the battery ends (S, T) or the unit contacts.
–Ensure correct polarities (S, T).
LWhen replacing the batteries:
–USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
–Do NOT use Alkaline/Manganese/Ni-Cd batteries.
–We recommend using the Panasonic rechargeable batteries noted in the base unit’s operating instructions for replacement battery information.
1Press the notch on the handset cover firmly, and slide it in the direction of the arrow.
2Insert the batteries negative (T) end first. Close the handset cover.
3Place the handset on the charger for about 7 hours before initial use.
Note:
LIf the batteries are fully charged, but the operating time seems to be shorter, clean the battery ends (S, T) and the charge contacts with a dry cloth.
For assistance, please visit http://www.panasonic.com/help |
3 |
Attention:
A nickel metal hydride battery that is recyclable powers the product you have purchased.
Please call 1-800-8-BATTERY (1- 800-822-8837) for information on how to recycle this battery.
Registering a handset to a base unit
1Base unit:
Press and hold {LOCATOR} for 4 seconds until the registration tone sounds.
LIf all registered handsets start ringing, press the same button to stop. Then repeat this step.
LThe next step should be completed within 90 seconds.
2Handset:
Press {OK}, then wait until a long beep sounds.
Note:
LWhile registering, “Base registering” is displayed on all registered handsets.
Display language
1{MENU} i{#}{1}{1}{0}
2{V}/{^}: Select the desired setting.
3Press the right soft key to save. i{OFF}
4 For assistance, please visit http://www.panasonic.com/help
Loading...