KX-TGA600M
Installation Manual
5.8 GHz Expandable Digital Cordless Handset
Model No.
Thank you for purchasing a Panasonic cordless telephone.
This handset is an accessory handset for use with Panasonic base units
KX-TG6021/KX-TG6022/KX-TG6051/KX-TG6052/KX-TG6053/
KX-TG6071/KX-TG6072/KX-TG6073. You must register this handset
with your base unit before it can be used.
This installation manual describes only the steps needed to register and
begin using the handset. Please read the base unit’s operating
instructions for further details.
Charge the battery for 7 hours before initial use.
Please read this Installation Manual before using the unit and save for
future reference.
For assistance, visit our website:
http://www.panasonic.com/help for customers in the U.S.A. or Puerto
Rico.
KX-TGA600
PQQX15656ZA DC1106PM0
Accessory information
Included accessories
Accessory
item
Charger PQLV30054ZB 1 – –
AC adaptor for
charger
Battery HHR-P107 1 1 1
Handset cover
*1 The handset cover comes attached to the handset.
Order number
PQLV30054ZM – 1 –
PQLV30054ZS – – 1
PQLV208 1 1 1
*1
PQYNTG3032BR 1 1 –
PQYNTG6051SR – – 1
Quantity
KX-TGA600B KX-TGA600M KX-TGA600S
Sales and support information
LTo order replacement accessories, call 1-800-332-5368.
LTTY users (hearing or speech impaired users) can call 1-866-605-1277.
Setting up the handset
Connecting the charger
(120 V AC, 60 Hz)
Bottom of
the charger
Hooks
Hooks
Fasten the AC adaptor cord to prevent
it from being disconnected.
Note:
LUse only the included Panasonic AC adaptor PQLV208.
LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become disconnected.
2 For assistance, please visit http://www.panasonic.com/help
Battery installation
Press the notch of the handset cover
1
firmly, and slide it in the direction of
the arrow.
2 Insert the battery (A), and press it
down until it snaps into position (B).
Then close the handset cover (C,
D).
B
A
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800822-8837) for information on how to
recycle this battery.
C
D
Battery charge
Place the handset on the charger for 7
hours before initial use.
Charge
contacts
Note:
LIf you want to use the handset
immediately, charge the battery for at
least 15 minutes.
LTo ensure that the battery charges
properly, clean the charge contacts of
the handset and charger with a soft,
dry cloth once a month. Clean more
often if the unit is subject to the
exposure of grease, dust, or high
humidity.
Panasonic battery performance
Operation Operating time
While in use
(talking)
While not in use
(standby)
While using the
clarity booster
feature
Note:
LThe handset can be left on the
charger without any ill effect on the
battery.
LThe battery level may not be
displayed correctly after you replace
the battery. In this case, place the
handset on the charger and let charge
for 7 hours.
Up to 5 hours
Up to 11 days
Up to 3 hours
For assistance, please visit http://www.panasonic.com/help 3
Registration
Headset (optional)
Register the handset to a KX-TG6021/
KX-TG6022/KX-TG6051/KX-TG6052/
KX-TG6053/KX-TG6071/KX-TG6072/
KX-TG6073 base unit.
1 Base unit:
KX-TG6021/KX-TG6022
Press and hold {LOCATOR} until
the IN USE indicator flashes.
KX-TG6051/KX-TG6052/
KX-TG6053/KX-TG6071/
KX-TG6072/KX-TG6073
Press and hold {LOCATOR/
INTERCOM} until the IN USE
indicator flashes.
LAfter the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
minute.
2 Handset:
Press {OK}, then wait until a beep
sounds.
Changing the display
language
1
KX-TG6021/KX-TG6022
{MENU} i {0}{8}
Connecting a headset to the handset
allows hands-free phone
conversations. We recommend using a
Panasonic KX-TCA60/KX-TCA86/KXTCA88HA/KX-TCA92/KX-TCA93/KXTCA94/KX-TCA95 headset. See page
2 for ordering information.
LHeadset shown is KX-TCA86.
Note:
LTo switch to the handset
speakerphone, press {s}. To return
to the headset, press {C}.
KX-TG6051/KX-TG6052/
KX-TG6053/KX-TG6071/
KX-TG6072/KX-TG6073
{MENU} i {0}{8}{1}
2 {V}/{^}: Select the desired setting.
3 Press the right soft key to save. i
{OFF}
4 For assistance, please visit http://www.panasonic.com/help
Wall mounting
Specifications
1 Drive the screws (not included) into
the wall.
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
2 Mount the charger (A), then slide it
down (B) and to the right (C) until it
is secure.
A
B
C
General
Operating environment:
5 °C – 40 °C (41 °F – 104 °F)
Handset
Frequency:
5.76 GHz – 5.84 GHz
Dimensions:
Approx. height 156 mm x width 48 mm x
depth 33 mm (6
inches × 1
Mass (Weight):
Approx. 155 g (0.34 lb.)
Power output:
200 mW (max.)
Power supply:
Ni-MH battery (3.6 V, 650 mAh)
Charger
Dimensions:
Approx. height 68 mm × width 82 mm ×
depth 87 mm (2
inches × 3
Mass (Weight):
Approx. 80 g (0.18 lb.)
Power consumption:
Standby: Approx. 0.4 W
Maximum: Approx. 3.3 W
Power supply:
AC adaptor (120 V AC, 60 Hz)
Note:
LDesign and specifications are subject
to change without notice.
LThe illustrations in these instructions
may vary slightly from the actual
product.
1
/
8
5
/16 inches)
11
7
/16 inches)
inches × 1
/
inches × 3
16
7
/8
7
/32
For assistance, please visit http://www.panasonic.com/help 5
Loading...