WAC Lighting WAC4294 Specifications and Instructions

InvisiLED
TAPE LIGHTS
InvisiLED
Less then
3M™ adhesive backing for easy and
Crafted in a sealed thermoplastic
InvisiLED:
A REVOLUTION IN LIGHTING
ENERGY EFFICIENT LED TAPE LIGHT
INVISILED IS IDEAL FOR:
Miniature coves• 
Lighting under counters and bars• 
Toe kick accent lighting• 
Display windows and refrigerated cases• 
Trade show booths• 
Architectural accents• 
AS EASY TO INSTALL AS PEEL AND STICK.
Whether you have a new construction or remodeling project, InvisiLED can update your design with a "green" solution to lighting spaces unimaginable before.
InvisiLED offers such an
extremely low pro le that
you will wonder where the light is coming from! Flexible and available in a variety of colors, it can be installed in a wide variety of applications.
THE BENEFITS OF INVISILED:
Low power consumption (2 watts/ft.)•  Long life (up to 50,000 hours)•  Crisp, quality light•  Virtually invisible installation•  Flexibility to accommodate curves •  effortlessly UL and CSA listed•  Lightweight and durable• 
ATTRIBUTES:
Available in Amber, Blue, Green, Red •  and White Operates on 12V-AC Class II power •  supply Less then •  8 inch high and approximately v inch wide Diodes spaced evenly 1 inch apart•  1 ft., 5 ft. and 2 inch sections available•  Field cuttable at the end of run•  3M™ adhesive backing for easy and •  reliable installation Crafted in a sealed thermoplastic •  enclosure for longlasting durability
On the cov er:
In the appli cation on t he cover blue InvisiLED is used to light under th e coverto p and amber InvisiLED to light the t oe kick. Red InvisiLED is mounted behind the flat scre en TV to create a float ing effe ct. The tot al load is le ss then 150W.
InvisiLED ACCESSORIES
LED 1 ft. AND 5 ft. SECTIONS
Voltage: 12V | Wattage: 2W
Model Length
LED-T-1 1 ft. 1
LED-T-5 5 ft. 1
LED-T-1-25 1 ft. 25
Color Color Temp. Lm/ft
AM (Amber)
BL (Blue)
GR (Green)
RD (Red)
WT (White)
Each unit has  xed male and female connectors
on each end. Requires a minimum run length of 5 ft, and are limite d to a maximu m run of 25 ft per 60W Cl ass II powe r supply.
|
592nm*
471nm*
523nm*
627nm*
3500K
Beam: 120°
Qty
22
20
60
35
90
Everything a contractor needs for several installations in a durable and reusable travelling case.
PROJECT SOLUTIONS KIT
Model
LED-T- KI T
Contents Quantity Description
LED-T-1-WT LED-T-2 IN-WT EN-1260-P-AR-T EN-1260-RB2-T L ED -T-IC 2 LED-T-I C6 LED-T-I C12 L ED -T-L L ED -T-E C LED-T- CL
25 15 1 2 2 1 1 4 4 25
LED 2-INCH SECTIONS
Voltage: 12V | Watt: 0. 33W
Model Length
LED-T-2IN 2 in. 1
LED-T-2IN-10 2 in. 10
Color Color Temp. Lm/ft
AM (Amber)
BL (Blue)
GR (Green)
RD (Red)
WT (White)
When used to supplement the main sections of Tape Light, inter mediary section s before L connec tor or joiner cable may be re-connect ed without cutting.
LED Tape Light - 12 in. sections LED Tape Light - 2 in. sections Plug-in p ower supply Remote p ower suppl y 3 in. joine r cables 7 in. joine r cable 13 in. joine r cable L-connectors End cap s Mounting clips
|
Beam: 120°
Qty.
592nm*
471nm*
523nm*
627nm*
3500K
22
20
60
35
90
CLASS II REMOTE POWER SUPPLY
Model Watt Length
EN-1260-RB2-T 60W 6 ft.
Input: 120V AC. O utput: 12v. The re mote power supply powers the InvisiLED with hard wir ing. A 6 ft long lead wire is include d.
ADDITIONAL LEAD WIRES
Model Length
LED-T-P-2 2 ft.
LED-T-P-12 12 ft.
Alter native le ngth of lea d wires fo r plug-in or
remot e power supply. May be  eld cut.
L CONNECTOR
Model L W
LED-T-L
L connec tor has male and fe male connec tors and is used for interconnection of a right angle of 90°. Polar ity is not a facto r.
1a in. 1c in. 4 in.
H
LED-T-EC includes 1 cut end cap and 1 male en d cap.
Cut end ca p
Male end c ap
MOUNTING CLIPS
Model W
LED-T-CL
Mounting c lips are rec ommended for installing InvisiLED on porous or uneven sur faces
that are dif  cult to permanently adhere the
sections solely using its self-adhesive back ing. 2 mounting clips per foot ar e recommended for str aight run s. More may b e neces sary f or curves or wher e 2 inch sec tions are used.
* The color of a LED is typic ally measured in wavelength nano meter (nm). The color tempe rature of white light is measured in Kelvin (K).
2 in.
Qty.
10
CLASS II PLUG-IN POWER SUPPLY
Model Watt Length
EN-1260-P-AR-T 60W 6 ft.
Input: 120V AC. Outpu t: 12v. A 6 ft long lea d wire is included and plugs into any 120V outlet.
JOINER CABLE
Model Length
LED-T-IC2 3 in.
LED-T-IC6 7 in.
LED-T-IC12 13 in.
LED-T-IC72 73 in.
Conne cts two secti ons.
END CAP
Model L W
LED-T-EC
Cut end cap
Male end cap
End caps should be use d to terminate every run to protect against dust ingress. See installation instructions for details.
2 in.
2 in.
c in.
2 in.
H
x in. x in.
RETROFIT CHANNEL
Model L W
LED-T-RC 36 in.
Retro t channels are used to construct a miniature cove or lig ht baffl e in which
InvisiLED may be concealed. The channel has a in . slot ever y 1 inch and can be curved at a radius o f 52 in. or greater. 2 in. screws are provided.
H
2 in. 2 in.
InvisiLED INSTALLATION INSTRUCTIONS
END CAP
"L" CONNECTOR
JOINER CABLE
TAPE LIGHT
LEAD WIRE
REMOTE POWER SUPPLY
PLUG IN POWER SUPPLY
LEAD WIRE
DESIGN GUIDELINES
2-inch sections and L connectors are combined to make •  convenient 90° angle turns at any 2-inch interval. Joiner cables can also be used for carrying power between sections of a run and creating connections at any angle.
InvisiLED•  sections are eld cuttable every inch at the
indicated markings on the adhesive side. CAUTION: Cut sections may not be rejoined to start a new section. To avoid cutting in the middle of a run, use a series of •  2-inch tape lights before the L connector or joiner cables.
InvisiLED•  sections have no polarity for connection.
Connectors may be used in either direction for left-hand or right-hand turns. Minimum run length of 5 ft and maximum run of 25 ft per •  60W Class II power supply.
CUSTOMIZE InvisiLED TO YOUR SPECIFIC NEEDS
DESIGN TEMPLATE
BILL OF MATER IALS
Determine the number of separately •  powered runs needed. How many power supply are needed?
Measure the length of each run •  and round it off to the nearest 2 in. interval. Determine the necessary quantities of 12 in. and 2 in. sections. How many 5 ft., 1 ft. and 2 in. sections are needed?
Count the number of right angle •  turns in the runs.
If making turns at angles other •  than 90°, calculate the number of 2 in., or 6 in. short joiner cables necessary.
Determine the number of sections •  that require jumping on the same power supply.
On smooth surfaces, the included • 
adhesive is sufcient in most
applications. However if mounting surface is a porous or textured surface, then use a Mounting Clip every 6 in. to reinforce the installation.
If a •  2 in. × 2 in. or greater cove or
channel is not built-in, a Retrot
Channel may be necessary to conceal the tape lights or provide an extended surface for mounting or directing the light. One every 3 ft.
Terminate each separately powered •  run with an end cap. Order one for every completed run.
MODEL NO. QT Y.
Plug in
EN-1260-P-AR-T
Remote
EN-1260-RB2-T
LED-T-1, LED-T-5, LED-T-2 IN
LED-T- L
LED-T-IC2, LED-T-I C6
LED-T-IC12, LED-T-I C72
Peel off the cover paper and stick to the surface
LED-T- CL Z
+ screws
(sold 10 to a carton)
LED-T- RC
+ screws/double sided tape
LED-T- EC
GENER AL INSTALLATION INSTRUCTIONS
InvisiLED
•  is easy to install by simply powering the power
supply and connecting the male and cut ends of the sections and connectors creating straight lines, any angled turns, or lengthwise curves. Use end caps to seal the end of all runs. Cut end caps and •  male end caps are available. Terminate each cut segment with a cut end cap. Terminate the uncut end of the Tape Light with male end cap. Behind each •  InvisiLED section is a 3M™ construction
adhesive. Peel back the covering and press rmly onto
smooth surfaces.
Use mounting clips or the retrot channel to permanently • 
secure InvisiLED to porous or textured surfaces. Not recommended for use with dimming controls.• 
W.A.C. Lighting. 615 South Street, Garden City, NY 11530
Tel: 516.515.5000 or 800.526.2588; Fax: 516.515.5050 or 80 0.526.2585
www.waclighting.com Copyright 2008
W.A.C. Lighting. 168 Brea Canyon Road, City of Industry, CA 91789
Tel: 909.468.1848 or 877.810.6695; Fax: 909.468.9958 or 866.810.6615
Loading...