|
|
TAC Xenta |
02-00038-01-en |
|
|
|
|
|
|
Cable Guide |
Installation instruction |
|
|||
|
|
Kabelguide |
Installationsanvisning |
|
|
Note! This page is intended as a schematic description of the cable connection between different units, modems and networks.
For more detailed information on the products, please refer to the next page and the respective manuals.
Obs! Denna sida är avsedd att ge en schematisk beskrivning av kabelförbindelsen mellan olika enheter, modem och nätverk.
För mer detaljerad information om produkterna, hänvisar vi till omstående sida och respektive manualer.
Connectivity Kits / Anslutningssatser Note: Kits containing an emission damper (see next page) shall have this clamped around the cable.
TAC Xenta: Programming Serial Kit, part no. 007309200
Applicable units
TAC Xenta 300/401/901
port RS232, cable 'L1' to PC
TAC Xenta 511/911
port RS232 B, cable 'L3' to PC
Usage (example)
TAC Menta / TAC Vista direct connection for application/configuration and download.
Configuration and commissioning, with the PC HyperTerminal.
Contents
Adapter ‘A1’ Cables ‘L1, ‘L3’ (see next page)
TAC Xenta: PC to Serial Kit, |
part no. 007309170 |
|
|
Applicable units
TAC Xenta 300/401/901 port RS232
TAC Xenta (511/) 911 port RS232 A
TAC 2000 to TAC Xenta 911 port RS232 A
Usage (example)
TAC Vista direct connection.
PC (TAC Menta, TAC Vista, InTA 2000, DM 2000) to TAC Xenta serial communication.
InTA 2000 over TCP/IP network. Note! Serial signal amplifier is also required at TAC 2000 unit! (Ex.: RAD, type PSA.)
Contents
Adapters ‘A2’, 'A4' Cable ‘L1’
(see next page)
TAC Xenta: Serial Link Kit, |
part no. 007309180 |
|
|
|
|
|
|
Applicable units |
Usage (example) |
Contents |
|
TAC Xenta 300/401/901 |
TAC Xenta |
Cable ‘L2’ |
|
port RS232, connected to |
connected to |
(see next page) |
|
TAC Xenta 911 |
TAC Xenta 911 |
||
|
|||
port RS232 A |
for IP communication. |
|
|
|
|
|
|
|
|
|
|
TAC Xenta: General Serial Kit, |
part no. 007309190 |
|
|
|
|
|
Applicable units (example)
ADU-L/KE-2/6505/5702/5708/PLB/ Danfoss GW-M/Danfoss Danduc
connected to
TAC Xenta 911
port RS232 A
Usage (example)
TAC other units / Danfoss unit connected to TAC Xenta 911 for IP communication.
Note! The modem connection cable for the selected unit is also required.
Contents
Adapter ‘A2’
Cable ‘L1’ (see next page)
TAC Xenta: Modem Connect Kit, |
part no. 007309160 |
|
|
Applicable units
TAC Xenta 300/401/901 port RS232
TAC Xenta 511 (/ 911) port RS232 A
Usage (example) |
Contents |
TAC Xenta to external |
Adapter ‘A3’ |
modem communication. |
Cable ‘L1’ |
For PPP connection. |
(see next page) |
Connection cable TAC Xenta–RS232 |
(part no. 007309030; to be phased out, |
|
|
replaced by Modem Connect Kit, no. 007309160 and Programming Serial Kit, no. 007309200) |
|
||
|
|
|
|
Applicable units |
Usage (example) |
Contents |
|
TAC Xenta 300/401/901 |
TAC Xenta to modem communication. |
Adapters 'A3', ‘A5’ |
|
port RS232, adapter 'A3' for modem |
Cable ‘L1’ |
|
|
TAC Xenta 300/401/901 |
TAC Menta / TAC Vista direct connection |
(see next page) |
|
port RS232, adapter ‘A5’ for PC |
and application/configuration and download. |
|
|
|
|
|
|
02-00038-01-en, Nov 2009 |
|
English - Svenska 1 (2) |
|
Loading...