Panasonic CS-Z7RKR, CSCU-Z24RKR, CSCU-Z28RKR, CSCU-Z18RKR, CSCU-Z15RKR User Manual

Operating Instructions

Air Conditioner

Model No.

Indoor Unit

CS-Z7RKR CS-Z9RKR CS-Z12RKR CS-Z15RKR CS-Z18RKR CS-Z21RKR CS-Z24RKR CS-Z28RKR

Outdoor Unit

CU-Z7RKR CU-Z9RKR CU-Z12RKR CU-Z15RKR CU-Z18RKR CU-Z21RKR CU-Z24RKR CU-Z28RKR

Operating Instructions Air Conditioner

Thank you for purchasing Panasonic Air Conditioner. Installation instructions attached.

Before operating the unit, read these operating instructions thoroughly and keep them for future reference.

English

F570018

Provide fast cooling, maximum comfort, clean air and optimise energy saving

i AUTO-X Cooling when it counts, Comfort when it matters

i AUTO-X with the new Panasonic Thermal Enhancement Technology (P-TECh) is a unique Panasonic compressor control technology which enable compressor to achieve maximum frequency in a short time.

i AUTO-X also comes with new AEROWINGS - twin flaps that works dynamically to adjust airflow directions. AEROWINGS gives you fast cooling at start up by directing airflow downwards*, and comfort of shower cooling by directing airflow upwards*.

So, you get to enjoy instant fast cooling satisfaction on a hot day and cooling comfort that goes on all day long.

*Applicable for horizontal flap AUTO setting.

ECONAVI + INVERTER The Perfect Energy Saving Technology

ECONAVI detects where energy is normally wasted and adjusts cooling/heating power depending on room conditions and activity levels. Then, INVERTER leverages ECONAVI sensor data and varies compressor rotation speed. This helps to optimize cooling/heating operation and reduces wasteful cooling/heating.

nanoe-G Purifies the air down to the smallest particles

Deactivates harmful micro-organisms such as viruses, bacteria, etc. to keep air clean.

It also deactivates viruses and bacteria on the filter to keep inside of the unit clean.

See “To learn more...” for details.

2

Quick guide

1

2

3

Inserting the batteries

1Pull out the back cover of remote control

2Insert AAA or R03 batteries (can be used ~ 1 year)

3Close the cover

	2	3	Clock setting
TIMER			1	Press CLOCK
ON		SET
1	2	3	2	Set the time
OFF		CANCEL
1		AC RC	3	Confirm
SET CHECK CLOCK		RESET

Basic operation

AIR CONDITIONER

		MODE	MILD
			DRY
	AUTO
2	i AUTO-X	OFF/ON	ECONAVI
1			NANOE-G
	MODE
		TEMP
3	MILD DRY
	POWERFUL/QUIET		AIR SWING
		FAN SPEED
	TIMER
	ON		SET
	1	2	3
	OFF		CANCEL
			AC RC
	SET CHECK	CLOCK	RESET

8m

1 Select the desired mode

AUTO HEAT COOL

i AUTO-X FAN DRY 2 Start/stop the operation

POWER

•Please note that the OFF indication is on to start.

3Select the desired temperature

•Selection range: 16 °C ~ 30 °C (Not applicable for FAN mode).

•Operating the unit within the recommended temperature may save energy.

HEAT : 20 °C ~ 24 °C. COOL: 26 °C ~ 28 °C.

DRY : 1 °C ~ 2 °C lower than room temperature.

•To dim or restore the unit’s

indicator brightness, press and hold for 5 seconds.

•Use remote control within 8 m from the remote control receiver of the indoor unit.

The illustrations in this manual are for explanation purposes only and may differ from the actual unit. They are subject to change without notice for future improvement.

Table of contents
Safety precautions...................	4-5
How to use...............................	6-7
To learn more... ......................	8-9
Cleaning instructions ................	10
Troubleshooting........................	11
Information.................	Back cover

Accessories

•Remote control

•AAA or R03 batteries × 2

•Remote control holder

•Screws for remote control holder × 2

This symbol shows that this equipment uses a flammable

WARNING refrigerant. If the refrigerant is

leaked, together with an external ignition source, there is a possibility of ignition.

				This symbol shows
				type of flammable
				refrigerant	English
CAUTION				contained in the
				system.
				This symbol shows
				that the Operation
				Instructions should
CAUTION
				be read carefully.
				This symbol shows
				that a service
CAUTION				personnel should
				be handling this
				equipment with
				reference to the
				Installation
				Instructions.
				This symbol
				shows that there
CAUTION				is information
				included in
				the Operation
				Instructions and/
				or Installation
				Instructions.

3

Safety precautions

To prevent personal injury, injury to others or property damage, please comply with the following: Incorrect operation due to failure to follow instructions below may cause harm or damage, the seriousness of which is classified as below:

This appliance is filled with R32 (mild flammable refrigerant). If the refrigerant is leaked and exposed to an external ignition source, there is a risk of fire.

	WARNING	This sign warns of
		death or serious injury.

This sign warns of CAUTION injury or damage to

property.

The instructions to be followed are classified by the following symbols:

This symbol denotes an action that is PROHIBITED.

These symbols denote actions

COMPULSORY.

Power supply Indoor unit

Air inlet

Air outlet

Remote control

Air inlet

Outdoor unit

Air outlet

WARNING

Indoor unit and outdoor unit

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

The appliance shall be installed and operated in a room with floor area larger than 2.06m² and keep away from ignition sources (such as heat/sparks/ open-flame) or, hazardous areas (such as gas appliances, gas cooking, reticulated gas supply systems, or electric cooling appliance, etc.

(Refer to the Installation Instruction table Amin (m²))

Be aware that refrigerant may not contain an odour, highly recommended to ensure suitable flammable refrigerant gas detectors are present, operating and able to warn of a leak.

Please consult authorised dealer or specialist to clean the internal parts, repair, install, remove and reinstall the unit. Improper installation and handling will cause leakage, electric shock or fire.

Confirm with authorised dealer or specialist on usage of any specified refrigerant type.

Using refrigerant type other than the specified may cause product damage, burst and injury etc.

Do not use means to accelerate the defrosting process or to clean, other than those recommended by manufacturer. Any unfit method or using incompatible material may cause product damage, burst and serious injury.

Do not pierce or burn as the appliance is pressurized. Do not expose the appliance to heat, flame, sparks, or other sources of ignition. Else it may explode and cause injury or death.

Do not install the unit in a potentially explosive or flammable atmosphere. Failure to do so could result in fire.

Do not insert your fingers or other objects into the air conditioner indoor or outdoor unit, rotating parts may cause injury.

Do not touch the outdoor unit during lightning, it may cause electric shock.

Do not expose yourself directly to cold air for a long period to avoid excess cooling.

Do not sit or step on the unit, you may fall down accidentally.

4