NEC Spinwriter 5530 User Guide

Comprehensive Support Document

spinwriter 5500 Revision Date: 1/20/94

Document: 273902

Page 1 of 19

Comprehensive Support Document

spinwriter 5500 Revision Date: 1/20/94

Question: I have a NEC Spinwriter 5500 Printer and I am using the WordPerfect Software Version 5.1. I need to know what software driver to select from the list of printers which is included with the software.

Answer: Below is a list of printer drivers which may be selected in order to support the NEC Spinwriter 5500 Printer line under DOS based software application packages.

NEC Model	Software Driver Selection/Emulation
NEC 5510	NEC 2010, 3510, 7710 or 8810 Spinwriter.
	Receive Only ANSI Terminal.
NEC 5515	NEC 2015, 3515, 7715 or 8815 Spinwriter.
	NEC 2030, 3530, 7730 or 8830 Spinwriter.
	Receive Only Diablo 1610 Replacement Printer.
NEC 5520	Keyboard Send/Receive ANSI Terminal.
NEC 5525	Keyboard Send/Receive Diablo 1620 Replace-
	ment Printer.
NEC 5530	Receive Only Centronics Type Printer.
NEC 5540	Keyboard Send/Receive APL-ASCII Terminal.
NEC 5500D	OEM’d to Diablo Corporation as a 1345 Type
	Printer. 12 Bit interface.
NEC 5500B	8 Bit Naked Interface Printer.
NEC 5500Q	OEM’d to Qume Corporation. 12 Bit Interface.
NEC 5500N	Ontel Type Printer.
NEC 5508	OEM’d to Honeywell Corporation.

*If the software application which is currently being utilized does not list any of the above listed printer driver options, then you may either select a Generic Text Printer driver or, you can contact the software manufacturer to see if they

Document: 273902

Page 2 of 19