NEC Spinwriter 7730 User Guide

Comprehensive Support Document

spinwriter 7700 Revision Date: 3/28/94

Document: 273903

Page 1 of 15

Comprehensive Support Document

spinwriter 7700 Revision Date: 3/28/94

Document: 273903

Page 2 of 15

Comprehensive Support Document

spinwriter 7700 Revision Date: 3/28/94

Question: I have a NEC Spinwriter 7700 Printer and I am using the WordPerfect Software Version 5.1. I need to know what software driver to select from the list of printers which is included with the software.

Answer: Below is a list of printer drivers which may be selected in order to support the NEC Spinwriter 7700 Printer line under DOS based software application packages.

NEC Model

Software Driver Selection/Emulation

NEC 7710

NEC 2010, 3510, 5510, 7710 or 8810 Spinwriter.

Receive Only ANSI Terminal.

NEC 7715

NEC 2015, 3515, 5515, 7715 or 8815 Spinwriter.

NEC 2030, 3530, 5530, 7730 or 8830 Spinwriter.

Receive Only Diablo 1610 Replacement Printer.

NEC 7720

Keyboard Send/Receive ANSI Terminal.

NEC 7725

Keyboard Send/Receive Diablo 1620 Replacement

Printer.

NEC 7730

Receive Only Centronics Type Printer.

NEC 7700D

OEM’d to Diablo Corporation as a 1345 Type

Printer. 12 Bit interface.

NEC 7700Q

OEM’d to Qume Corporation. 12 Bit Interface.

Document: 273903

Page 3 of 15

Comprehensive Support Document

spinwriter 7700 Revision Date: 3/28/94

SWITCH SETTINGS

Document: 273903

Page 4 of 15

Comprehensive Support Document

spinwriter 7700 Revision Date: 3/28/94

Document: 273903

Page 5 of 15