NEC Single Line Telephone User Manual
Loading...
Intelligent Hybrid System
Single Line Telephone
Quick Reference Guide
Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation with respect to, any of the equipment covered. This manual is subject to change without notice and NEC Business Solutions Ltd has no obligation to provide any updates or corrections to this manual. Further, NEC Business Solutions Ltd also reserves the right, without prior notice, to make changes in equipment design or components as it deems appropriate. No representation is made that this manual is complete or accurate in all respects and NEC Business Solutions Ltd shall not be liable for any errors or omissions. In no event shall NEC Business Solutions Ltd be liable for any incidental or consequential damages in connection with the use of this manual. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied or reproduced without prior written consent of NEC Business Solutions Ltd.
Copyright © 2004 by NEC Business Solutions Ltd
All Rights Reserved.
NEC Business Solutions Ltd |
Issue 1.0 |
633-647 Springvale Road, |
August |
Mulgrave VIC 3170 |
2004 |
Before using Your Telephone…
Thank you for purchasing the NEC “Xen Topaz” system.
Due to the flexibility built into the system, your Dialling Codes and Feature Capacities may differ from those in this guide. Check with your Supplier / System Administrator and make a note of any differences.
Using Your Telephone
This User Guide describes general analogue Single Line Telephone (SLT) procedures.
Refer to the User Guide included with to your specific SLT for details on additional key functions.
Handset
1 |
2ABC |
3DEF |
Dial Keys |
4GHI |
5JKL |
6MNO |
|
7PQRS |
8TUV |
9WXYZ |
|
|
0 |
# |
REDIAL Key |
PROGRAM |
FLASH |
REDIAL |
|
¥ |
£ |
IN USE |
|
|
|
||
|
|
|
FLASH Key |
PROGRAM Key |
|
|
In-Use Lamp |
|
|
|
|
|
|
|
Volume Control Key |
1
For more convenient use…
Do Not Disturb (DND)
8 |
4 |
7 |
1 DND : Trunk Incoming Call |
2DND : Intercom Incoming Call
3DND : Trunk & Intercom Incoming Call
4DND : Transferred (CFW) Call
0DND : Cancel
When you set DND function, the Internal Dial Tone pattern is changed.
Call Forwarding / Follow Me
|
|
|
|
CFW Condition |
Extension Number |
CFW Type |
||
|
8 |
8 |
8 |
|
? |
? |
? ? |
? |
2 |
When Busy / No Answer |
6 |
When No Answer |
2 |
FWD All Calls |
|||
3 |
Follow Me |
|
|
7 |
Both Ring |
|
3 |
FWD Outside Calls only |
4 |
Immediate |
|
|
0 |
Cancel |
|
4 |
FWD Intercom Calls only |
When you set Call Forwarding function, the Internal Dial Tone pattern is changed.
Conference
FLASH |
|
|
Extension Number |
|
||
|
|
|
|
|
|
|
8 |
2 |
6 |
? |
? |
? |
|
(Talking) |
|
|
|
Telephone Number |
(Talk) |
|
|
|
|
|
|||
|
|
|
9 |
? |
? |
|
You can repeat this operation to add more parties. |
FLASH |
|
|
You may be able to have up to 32 parties. (include your extension) |
<twice> |
|
6