Kenwood KDC-X7200DAB Manual

KDC-X7200DAB

CD-RECEIVER

INSTRUCTION MANUAL

AMPLI-TUNER LECTEUR DE CD

MODE D’EMPLOI

CD-RECEIVER

BEDIENUNGSANLEITUNG

© 2017 JVC KENWOOD Corporation

B5A-2118-00 (EN)

For Israel

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.

Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Information sur l’élimination des anciens équipements électriques et électroniques et piles électriques (applicable dans les pays qui ont adopté des systèmes de collecte sélective)

Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne peuvent pas être éliminés comme ordures ménagères.

Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés sur des sites capables de traiter ces produits et leurs déchets.

Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage adapté et l’élimination des déchets aideront à conserver les ressources et à nous préserver des leurs effets nocifs sur notre santé et sur l’environnement.

Remarque: Le symbole “Pb“ ci-dessous sur des piles électrique indique que cette pile contient du plomb.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien (anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss.

Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen.

Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen Entsorgungsbetrieben.

Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.

i

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Marquage des produits utilisant un laser

L’étiquette est attachée au châssis/boîtier de l’appareil et indique que l’appareil utilise des rayons laser de classe 1. Cela signifie que l’appareil utilise des rayons laser d’une classe faible. Il n’y a pas de danger de radiation accidentelle hors de l’appareil.

Kennzeichnung von Geräten mit Laser-Abtastern

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts besteht.

ii

Declaration of Conformity with regard to the RE Directive 2014/53/EU Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU Representative:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Déclaration de conformité se rapportant à la directive RE 2014/53/EU Déclaration de conformité se rapportant à la directive RoHS 2011/65/EU

Fabricant:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Représentants dans l’UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Konformitätserklärung in Bezug auf die RE-Vorschrift 2014/53/EU Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU

Hersteller:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU-Vertreter:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

English

Hereby, JVCKENWOOD declares that the radio equipment “KDC-X7200DAB” is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://www.kenwood.com/cs/ce/eudoc/

Français

Par la présente, JVCKENWOOD déclare que l’équipement radio « KDC-X7200DAB » est conforme à la directive 2014/53/UE.

L’intégralité de la déclaration de conformité UE est disponible à l’adresse Internet suivante : http://www.kenwood.com/cs/ce/eudoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das Funkgerät “KDC-X7200DAB” der Richtlinie 2014/53/EU entspricht. Der volle Text der EU-Konformitätserklärung steht unter der folgenden Internetadresse zur Verfügung: http://www.kenwood.com/cs/ce/eudoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de radioapparatuur “KDC-X7200DAB” in overeenstemming is met Richtlijn 2014/53/EU.

De volledige tekst van de EU-verklaring van overeenstemming is te vinden op het volgende internetadres: http://www.kenwood.com/cs/ce/eudoc/

Italiano

Con la presente, JVCKENWOOD dichiara che l΄apparecchio radio “KDC-X7200DAB” è conforme alla Direttiva 2014/53/UE.

Il testo integrale della dichiarazione di conformità UE è disponibile al seguente indirizzo internet: http://www.kenwood.com/cs/ce/eudoc/

Español

Por la presente, JVCKENWOOD declara que el equipo de radio “KDC-X7200DAB” cumple la Directiva 2014/53/EU. El texto completo de la declaración de conformidad con la UE está disponible en la siguiente dirección de internet: http://www.kenwood.com/cs/ce/eudoc/

Português

Deste modo, a JVCKENWOOD declara que o equipamento de rádio “KDC-X7200DAB” está em conformidade com a Diretiva 2014/53/UE.

O texto integral da declaração de conformidade da UE está disponível no seguinte endereço de internet: http://www.kenwood.com/cs/ce/eudoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy “KDC-X7200DAB” jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności EU jest dostępny pod adresem:

http://www.kenwood.com/cs/ce/eudoc/

Český

Společnost JVCKENWOOD tímto prohlašuje, že rádiové zařízení “KDC-X7200DAB” splňuje podmínky směrnice 2014/53/EU.

Plný text EU prohlášení o shodě je dostupný na následující internetové adrese: http://www.kenwood.com/cs/ce/eudoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a „KDC-X7200DAB“ rádióberendezés megfelel a 2014/53/EU irányelvnek.

Az EU konformitási nyilatkozat teljes szövege az alábbi weboldalon érhető el: http://www.kenwood.com/cs/ce/eudoc/

iii

Svenska

Härmed försäkrar JVCKENWOOD att radioutrustningen “KDC-X7200DAB” är i enlighet med direktiv 2014/53/EU.

Den fullständiga texten av EU-försäkran om överensstämmelse finns på följande Internetadress: http://www.kenwood.com/cs/ce/eudoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite “KDC-X7200DAB” on direktiivin 2014/53/EU mukainen.

EU-vaatimustenmukaisuusvakuutusvaatimus löytyy kokonaisuudessaan seuraavasta internetosoitteesta: http://www.kenwood.com/cs/ce/eudoc/

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska oprema »KDC-X7200DAB« v skladu z Direktivo 2014/53/EU. Celotno besedilo direktive EU o skladnosti je dostopno na tem spletnem naslovu: http://www.kenwood.com/cs/ce/eudoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje, že rádiové zariadenie „KDC-X7200DAB“ vyhovuje smernici 2014/53/EÚ.

Celý text EÚ vyhlásenia o zhode nájdete na nasledovnej internetovej adrese: http://www.kenwood.com/cs/ce/eudoc/

Dansk

Herved erklærer JVCKENWOOD, at radioudstyret “KDC-X7200DAB” er i overensstemmelse med Direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde ordlyd er tilgængelig på følgende internetadresse: http://www.kenwood.com/cs/ce/eudoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι ο ραδιοεξοπλισμός «KDC-X7200DAB»

συμμορφώνεται με την Οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης

της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση στο διαδίκτυο: http://www.kenwood.com/cs/ce/eudoc/

Eesti

Käesolevaga JVCKENWOOD kinnitab, et „KDC-X7200DAB“ raadiovarustus on vastavuses direktiiviga 2014/53/EL.

ELi vastavusdeklaratsiooni terviktekst on kättesaadav järgmisel internetiaadressil: http://www.kenwood.com/cs/ce/eudoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra „KDC-X7200DAB” atbilst direktīvas 2014/53/ES prasībām.

Pilns ES atbilstības deklarācijas teksts ir pieejams šādā tīmekļa adresē: http://www.kenwood.com/cs/ce/eudoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga „KDC-X7200DAB“ atitinka 2014/53/EB direktyvos reikalavimus.

Visą EB direktyvos atitikties deklaracijos tekstą galite rasti šiuo internetiniu adresu: http://www.kenwood.com/cs/ce/eudoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir tarradju “KDC-X7200DAB” huwa konformi mad-Direttiva 2014/53/UE.

It-test kollu tad-dikjarazzjoni ta’ konformità huwa disponibbli fl-indirizz intranet li ġej: http://www.kenwood.com/cs/ce/eudoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema “KDC-X7200DAB” u skladu s Direktivom 2014/53/EU.

Cjeloviti tekst deklaracije Europske unije o usklađenosti dostupan je na sljedećoj internet adresi: http://www.kenwood.com/cs/ce/eudoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că echipamentul radio “KDC-X7200DAB” este în conformitate cu Directiva 2014/53/UE.

Textul integral al declarației de conformitate UE este disponibil la urmatoarea adresă de internet: http://www.kenwood.com/cs/ce/eudoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD декларира, че радиооборудването на “KDC-X7200DAB” е в съответствие с Директива 2014/53/ЕС. Пълният текст на ЕС декларацията за съответствие е достъпен на следния интернет адрес: http://www.kenwood.com/cs/ce/eudoc/

Turkish

Burada, JVCKENWOOD “KDC-X7200DAB” radyo ekipmanının 2014/53/AB Direktifine uygun olduğunu bildirir.

AB uyumluluk deklarasyonunun tam metni aşağıdaki internet adresinde mevcuttur. http://www.kenwood.com/cs/ce/eudoc/

Русский

JVCKENWOOD настоящим заявляет, что радиооборудование «KDC-X7200DAB» соответствует Директиве 2014/53/EU. Полный текст декларации соответствия ЕС доступен по следующему адресу в сети Интернет: http://www.kenwood.com/cs/ce/eudoc/

Українська

Таким чином, компанія JVCKENWOOD заявляє, що радіообладнання «KDC-X7200DAB» відповідає Директиві 2014/53/EU.

Повний текст декларації про відповідність ЄС можна знайти в Інтернеті за такою адресою: http://www.kenwood.com/cs/ce/eudoc/

iv

CONTENTS

BEFORE USE	2
BASICS	3
GETTING STARTED	4

1Select the display language and cancel the demonstration

2 Set the clock and date

3 Set the initial settings

DIGITAL RADIO	6
ANALOG RADIO	9
AUX	10
CD/USB/iPod/ANDROID	11
Spotify	13
BLUETOOTH®	15
AUDIO SETTINGS	22
DISPLAY SETTINGS	25
TROUBLESHOOTING	26
REFERENCES	29
Maintenance
More information
SPECIFICATIONS	32
INSTALLATION/
CONNECTION	33

BEFORE USE

IMPORTANT

•To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual.

•Please keep the manual in a safe and accessible place for future reference.

WARNING

• Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

•Adjust the volume so that you can hear sounds outside the car to prevent accidents.

•Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

•Avoid using the external device if it might hinder safe driving.

•Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

•Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.

•If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

•USB rating for the USB cable from the rear of the unit is indicated on a label. ( 36)

•Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected ( 35). Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

How to read this manual

•Operations are explained mainly using buttons on the faceplate.

•English indications are used for the purpose of explanation. You can select the display language from the [FUNCTION] menu. ( 5)

•[XX] indicates the selected items.

•( XX) indicates references are available on the stated page.

2ENGLISH

BASICS
Faceplate			Attach
Volume knob	Display window
	Lights up when
	Bluetooth connection is		Detach
	established. (	15)

Detach

Auxiliary cable from the rear of the unit.

How to reset

button

USB 1 cable from the rear of the unit.

						USB 2 cable from the rear of the unit.	Reset the unit within
							5 seconds after detaching
NOTE: The highlighted area on the faceplate flashes when the unit enters searching status.							the faceplate.
To				On the faceplate
Turn on the power				Press	.
				• Press and hold to turn off the power.
Adjust the volume				Turn the volume knob.
Select a source				Press	repeatedly.
Change the display information				Press DISP repeatedly. ( 31)

ENGLISH 3

GETTING STARTED

1Select the display language and cancel the demonstration

When you turn on the power for the first time (or [FACTORY RESET] is set to [YES], 5), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB”

1Turn the volume knob to select [ENG] (English), [RUS] (Russian) or [SPA] (Spanish), then press the knob.

[ENG] is selected for the initial setup.

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.

2Press the volume knob.

[YES] is selected for the initial setup.

3Press the volume knob again.

“DEMO OFF” appears.

Then, the display shows the selected crossover type: “2-WAY X ’ OVER” or “3-WAY X ’ OVER”

• To change the crossover type, see “Change the crossover type”. ( 6)

2Set the clock and date

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [CLOCK], then press the knob.

To adjust the clock

3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.

4Turn the volume knob to make the settings, then press the knob.

Hour Minute

5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob.

To set the date

7 Turn the volume knob to select [DATE FORMAT], then press the knob.

8Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob.

9 Turn the volume knob to select [DATE SET], then press the knob.

10Turn the volume knob to make the settings, then press the knob.

Day Month Year or Month Day Year

11Press and hold to exit.

To return to the previous setting item, press .

3Set the initial settings

1 Press repeatedly to enter STANDBY.

2 Press the volume knob to enter [FUNCTION].

3Turn the volume knob to select an item ( 5), then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

4ENGLISH

GETTING STARTED

Default: XX

DISPLAY

EASY MENU		When entering [FUNCTION]...
		ON: LCD DISPLAY zone illumination changes to white color. ;
		OFF: LCD DISPLAY zone illumination remains as [COLOR SELECT] color.
		( 26)
		• KEY zone illumination changes to light blue color when you enter
		[FUNCTION], irregardless of the [EASY MENU] setting.
		• Refer to the illustration on page 25 for zone identification.
TUNER SETTING
DAB ANT		ON: Supplies power to the DAB antenna. Selects when using the supplied
POWER		antenna. ; OFF: Does not supply power. Selects when using passive
		antenna without booster. ( 37)
PRESET TYPE		NORMAL: Memorizes one station for each preset button in each band
		(FM1/FM2/FM3/MW/LW/DB1/DB2/DB3). ; MIX: Memorizes one station
		(digital radio or analog radio) for each preset button, regardless of the
		selected band.
SYSTEM
KEY BEEP		(Not applicable if 3-way crossover is selected.)
		ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
	SPOTIFY SRC	ON: Enables SPOTIFY in source selection. ; OFF: Disables. ( 13)
	BUILT-IN AUX	ON: Enables AUX in source selection. ; OFF: Disables. ( 10)
POWER OFF		Applicable only when the demonstration mode is turned off.
WAIT		Sets the duration when the unit will automatically turn off (while in
		standby mode) to save the battery.
		20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ; – – –: Cancels

CD READ	1: Automatically distinguishes between audio file disc and music CD. ;
	2: Forces to play as a music CD. No sound can be heard if an audio file
	disc is played.

F/W UPDATE

		UPDATE SYSTEM/UPDATE DAB1/UPDATE DAB2
			F/W UPDATE	YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
			xxxx/	activated).
			F/W UPDATE	For details on how to update the firmware, visit
			xxxxx/	<www.kenwood.com/cs/ce/>.
			F/W UPDATE Vxxx
	FACTORY RESET			YES: Resets the settings to default (except the stored station). ;
				NO: Cancels
	CLOCK
	CLOCK DISPLAY			ON: The clock time is shown on the display even when the unit is
				turned off. ; OFF: Cancels.
	ENGLISH			Select the display language for [FUNCTION] menu and music
	РУССКИЙ			information if applicable.
				By default, [ENGLISH] is selected.
	ESPANOL

ENGLISH 5

GETTING STARTED

Change the crossover type

1 Press repeatedly to enter STANDBY.

2Press and hold number buttons 4 and 5 to enter crossover select.

The current crossover type appears.

3Turn the volume knob to select “2WAY” or “3WAY”, then press the knob.

4Turn the volume knob to select “YES” or “NO”, then press the knob.

The selected crossover type appears.

•To cancel, press and hold .

•To adjust the selected crossover settings, ( 23, 24).

Caution

Select a crossover type according to how the speakers are connected.

( 35, 36)

If you select a wrong type:

•The speakers may damage.

•The output sound level may be extremely high or low.

DIGITAL RADIO

About DAB (Digital Audio Broadcasting)

DAB is one of the digital radio broadcasting systems available today. It can deliver digital quality sound without any annoying interference or signal distortion. Furthermore, it can carry text, pictures and data.

In contrast to FM broadcast, where each program is transmitted on its own frequency, DAB combines several programs (called “services”) to form one “ensemble.”

The “primary component” (main radio station) is sometimes accompanied by a “secondary component” which can contain extra programs or other information.

Preparation:

1Connect the supplied DAB antenna to the DAB antenna jack.

( 36)

2 Press repeatedly to select DIGITAL AUDIO.

3Press and hold (LIST UPDATE) to start the Service List update.

“LIST UPDATE” appears and update starts. “UPDATED” appears when update completes.

Updates take up to 3 minutes. No interruption (such as traffic information) is possible during updates.

•To cancel the Service List update:

Press and hold (LIST UPDATE) again.

6ENGLISH

DIGITAL RADIO

Search for an ensemble

1 Pressrepeatedly to select DIGITAL AUDIO.

2 Press repeatedly to select DB1/DB2/DB3. 3 Press and hold S / T to search for an ensemble.

4Press S / T to select an ensemble, service or component to listen.

•To change the searching method for S / T: Press repeatedly.

AUTO1 : Press S / T: Select an ensemble, service or component. Press and hold S / T: Automatically search for an ensemble.

AUTO2 : Press S / T: Search for a preset station.

MANUAL : Press S / T: Select an ensemble, service or component. Press and hold S / T: Manually search for an ensemble.

•To store a service: Press and hold one of the number buttons (1 to 6).

•To select a stored service: Press one of the number buttons (1 to 6).

Select a service

1 Pressto enter Service Search mode.

2Turn the volume knob or press J / K to select a service, then press the knob.

To cancel the Service Search mode, pressagain.

Select a service by name

1 Pressto enter Service Search mode.

2 Turn the volume knob quickly to enter Alphabet Search mode.

3Turn the volume knob or press S / T to select the character to be searched for.

Press J / K to go to the previous/next page.

4 Press the volume knob to start searching.

5 Turn the volume knob to select a service, then press the knob.

To cancel the Alphabet Search mode, press again.

Other settings

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select an item (see the following table), then press the knob.

3Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.

4 Press and hold

to exit.

To return to the previous setting item, press .

Default: XX

TUNER SETTING

AF SET	ON:
	While listening to DAB: Automatically switch to FM broadcasting the same
	program if the DAB signal becomes weak. It will switch back to DAB sound
	when the signal becomes strong again.
	While listening to FM: Automatically switch to DIGITAL AUDIO source
	broadcasting the same program (if available). ;
	OFF: Cancels.
TI	ON: Allows the unit to temporarily switch to Traffic Information if available
	(“TI” lights up). ; OFF: Cancels.

ENGLISH 7

DIGITAL RADIO

PTY SEARCH	1 Turn the volume knob to select the available Program Type (see the
	following), then press the knob.
	2 Turn the volume knob to select the PTY language (ENGLISH/FRENCH/
	GERMAN), then press the knob.
	3 Press S / T to start searching.
ASW SELECT	TRAVEL, WARNINGS, NEWS, WEATHER, EVENT, SPECIAL, RAD INFO,
	SPORTS, FINANCE: Turn the volume knob to make a selection, then press
	the knob.
	“*” appears in front of the activated announcement type.
	Automatically switch from any source to Digital radio ensembles
	broadcasting an activated announcement type.
	• Multiple announcement can be activated simultaneously.
	• To deactivate, press the volume knob again (“*” goes off).
LIST UPDATE	AUTO: Automatically update the DAB Service List when the power is
	turned on. ; MANUAL: Updates the DAB Service List by pressing and
	holding	(LIST UPDATE).
PTY WATCH	1 Turn the volume knob to select the available Program Type, then press
	.
	The unit automatically switch from any source to Digital Radio
	ensembles broadcasting the selected type of program.
	Program Type: NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA,
	CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music),
	EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music),
	WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN,
	TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES,
	FOLK M (music), DOCUMENT
	OFF: Cancels.
	2 Press the volume knob to enter PTY language selection.
	3 Turn the volume knob to select the PTY language (ENGLISH/FRENCH/
	GERMAN), then press the knob.
RELATED	ON: Enable Soft-Link function to switch to an alternative service which is
SERVICE	different audio program from the current audio program. ;
	OFF: Disable.

CLOCK

TIME SYNC	ON: Synchronizes the unit’s time to the Digital Radio signal station time. ;
	OFF: Cancels.

Available Program Type for [PTY SEARCH]

SPEECH : NEWS, AFFAIRS, INFO (information), SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

MUSIC : POP M (music), ROCK M (music), EASY M (music), LIGHT M (music),

CLASSICS, OTHER M (music), JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music)

The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if selected.

•If the volume is adjusted during reception of traffic information, announcement, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, announcement, alarm or news bulletin is turned on.

8ENGLISH

ANALOG RADIO

Search for a station

1 Press repeatedly to select RADIO.

2 Press repeatedly to select FM1/FM2/FM3/MW/LW. 3 Press S / T to search for a station.

•To change the searching method for S / T: Press repeatedly.

AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

•To store a station: Press and hold one of the number buttons (1 to 6).

•To select a stored station: Press one of the number buttons (1 to 6).

Other settings

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select an item (see the following table), then press the knob.

3Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

Default: XX

TUNER SETTING

LOCAL SEEK	ON: Searches only stations with good reception. ; OFF: Cancels.
	• Settings made are applicable only to the selected source/station. Once
	you change the source/station, you need to make the settings again.
AUTO	YES: Automatically starts memorizing 6 stations with good reception. ;
MEMORY	NO: Cancels.
	• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 5)
MONO SET	ON: Improves the FM reception, but the stereo effect may be lost. ;
	OFF: Cancels.
NEWS SET	ON: The unit will temporarily switch to News Programme if available. ;
	OFF: Cancels.
REGIONAL	ON: Switches to another station only in the specific region using the “AF”
	control. ; OFF: Cancels.
AF SET	ON: Automatically searches for another station broadcasting the same
	program in the same Radio Data System network with better reception
	when the current reception is poor. ; OFF: Cancels.
TI*	ON: Allows the unit to temporarily switch to Traffic Information if available
	(“TI” lights up). ; OFF: Cancels.
	* [TI] in MW/LW band is for enabling traffic interruption to DIGITAL AUDIO
	source only.

PTY SEARCH	1 Turn the volume knob to select the available Program Type ( 10),
	then press the knob.

2Turn the volume knob to select the PTY language (ENGLISH/FRENCH/ GERMAN), then press the knob.

3 Press S / T to start searching.

ENGLISH 9

ANALOG RADIO

Available Program Type for [PTY SEARCH]

SPEECH : NEWS, AFFAIRS, INFO (information), SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

MUSIC : POP M (music), ROCK M (music), EASY M (music), LIGHT M (music),

CLASSICS, OTHER M (music), JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music)

The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if selected.

•[LOCAL SEEK]/[MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[PTY SEARCH] is selectable only when the band is FM1/FM2/FM3.

•If the volume is adjusted during reception of traffic information or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information or news bulletin is turned on.

AUX

Preparation:

Select [ON] for [BUILT-IN AUX] for [SOURCE SELECT]. ( 5)

Start listening

1Connect a portable audio player (commercially available).

3.5mm stereo mini plug with “L” shaped connector (commercially available)

Portable audio player

Auxiliary cable from the rear of the unit.

2 Press repeatedly to select AUX.

3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1	Press the volume knob to enter [FUNCTION].
2	Turn the volume knob to select [SYSTEM], then press the knob.
3	Turn the volume knob to select [AUX NAME SET], then press the knob.
4	Turn the volume knob to select an item, then press the knob.
5	AUX (default)/DVD/PORTABLE/GAME/VIDEO/TV
	Press and hold	to exit.

To return to the previous setting item, press .

10 ENGLISH

CD/USB/iPod/ANDROID

Start playback

The source changes automatically and playback starts.

CD	Label side	M Eject disc

USB

USB 1 cable from the rear of the unit

(USB input terminal).

You can also connect to the USB 2 cable from the rear of the unit (USB input terminal).

CA-U1EX (max.: 500 mA) (optional accessory)

iPod/iPhone

KCA-iP102/KCA-iP103 (optional accessory)*1 or accessory of the iPod/iPhone*2

ANDROID*3

USB cable*2 (commercially available)

*1
	KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type
*2	Do not leave the cable inside the car when not using.

Selectable source: CD/USB 1/USB 2/iPod 1/iPod 2/ANDROID 1/ANDROID 2

To		On the faceplate
Playback/pause		Press	.
Reverse/Fast-forward*4		Press and hold S / T.
Select a track/file		Press S / T.
Select a folder*5		Press J / K.
Repeat play*6		Press	repeatedly.
		TRACK REPEAT/ALL REPEAT				: Audio CD
		FILE REPEAT/FOLDER REPEAT/ALL REPEAT				: MP3/WMA/AAC/WAV/
						FLAC file
		FILE REPEAT/FOLDER REPEAT/REPEAT OFF				: iPod or ANDROID
Random play*6		Press	repeatedly.
		DISC RANDOM/RANDOM OFF			: Audio CD
		FOLDER RANDOM/RANDOM OFF : MP3/WMA/AAC/WAV/FLAC file,
					iPod or ANDROID
		Press and hold		to select ALL RANDOM.*7
*3	When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the
	instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application
*4	on your Android device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.
	For ANDROID: Applicable only when [BROWSE MODE] is selected. (				12)
*5	For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ANDROID.
*6	For iPod/ANDROID: Applicable only when [MODE OFF]/[BROWSE MODE] is selected. ( 12)
*7	For CD: Only for MP3/WMA/AAC files.

ENGLISH 11

CD/USB/iPod/ANDROID

Select control mode

While in iPod 1/iPod 2 source, press 5 repeatedly.

MODE ON : Control iPod using the iPod itself. However, you can still play/ pause, file skip, fast-forward or reverse from this unit.

MODE OFF : Control iPod from this unit.

While in ANDROID 1/ANDROID 2 source, press 5 repeatedly.

BROWSE MODE : Control Android device from this unit via KENWOOD MUSIC PLAY application installed in the Android device.

HAND MODE : Control Android device using the Android device itself via other media player applications installed in the Android device. However, you can still play/pause and file skip from this unit.

Select music drive

While in USB 1/USB 2 source, press 5 repeatedly.

Stored songs in the following drive will be played back.

•Selected internal or external memory of a smartphone (Mass Storage Class).

•Selected drive of a multiple drives device.

Listen to TuneIn Radio/TuneIn Radio Pro/Aupeo

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Select a file from a folder/list

For iPod/ANDROID, applicable only when [MODE OFF]/[BROWSE MODE] is selected.

1	Press	.
2	Turn the volume knob to select a folder/list, then press the knob.

3 Turn the volume knob to select a file, then press the knob.

Quick Search (applicable only for CD, USB 1, USB 2, ANDROID 1 and ANDROID 2 source)

If you have many files, you can search through them quickly.

Turn the volume knob quickly to browse through the list quickly.

Skip Search (applicable only for iPod 1, iPod 2, ANDROID 1 and ANDROID 2 source)

Press S / T to search at a preset skip search ratio.

( 13, [SKIP SEARCH])

• Pressing and holding S / T searches at a 10% ratio.

Alphabet search (applicable only for iPod 1, iPod 2, ANDROID 1 and ANDROID 2 source)

You can search for a file according to the first character.

For iPod 1/iPod 2 source

1 Turn the volume knob quickly to enter character search.

2Turn the volume knob to select the character.

•Select “*” to search for a character other than A to Z, 0 to 9.

3 Press S / T to move to the entry position.

•You can enter up to 3 characters.

4 Press the volume knob to start searching.

For ANDROID 1/ANDROID 2 source

1 Press J / K to enter character search.

2Turn the volume knob to select the character. ^A^: Upper case letters (A to Z)

_A_: Lower case letters (a to z) -0-: Numbers (0 to 9)

***: Character other than A to Z, 0 to 9

3Press the volume knob to start searching.

•To return to the root folder/first file/top menu, press 5. (Not applicable for

BT AUDIO source.)

•To return to the previous setting item, press .

•To cancel, press and hold .

12 ENGLISH

	CD/USB/iPod/ANDROID			Spotify
				Preparation:
	Settings to use KENWOOD Remote application
				Install the latest version of the Spotify application on your device (iPhone/
	KENWOOD Remote application is designed to control the KENWOOD car			iPod touch), then create and account and log in to Spotify.
	receiver’s operations from the iPhone/iPod (via USB input terminal).			• Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 5)
	Preparation:
	Install the latest version of KENWOOD Remote application on your device			Start listening
	before connecting. For more information, visit <www.kenwood.com/cs/ce/>.			1 Open the Spotify application on your device.
	You can make the settings in the same way as connection via Bluetooth.
				2 Connect your device to the USB input terminal.
	( 20, 21)
	Other settings
	1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select an item (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

USB 1 cable from the

KCA-iP102/KCA-iP103 (optional

4 Press and hold

to exit.

rear of the unit.

accessory)*1 or accessory of the

To return to the previous setting item, press

.

iPod/iPhone*2

Default: XX

You can also connect to the USB 2 cable

USB

from the rear of the unit.

MUSIC DRIVE

DRIVE CHANGE: The next drive ([DRIVE 1] to [DRIVE 4]) is selected

automatically and playback starts.

3

Press

repeatedly to select SPOTIFY 1/SPOTIFY 2.

Repeat steps 1 to 3 to select the following drives.

Broadcast starts automatically.

SKIP SEARCH

0.5%/1%/5%/10%: While listening to iPod 1, iPod 2, ANDROID 1 or

ANDROID 2 source, selects the skip search ratio over the total files.

*1

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

*2

Do not leave the cable inside the car when not using.

ENGLISH 13

Spotify

To		On the faceplate
Playback/pause		Press	.
Skip a track		Press S*3 / T.
Thumbs up or		Press J / K.
thumbs down*4
Start radio		Press and hold 5.
Repeat play*5		Press	repeatedly.
		REPEAT ALL/REPEAT ONE*3/REPEAT OFF
Random play*5		Press	repeatedly.*3
		SHUFFLE ON/SHUFFLE OFF
*3	Available for premium account users only.
*4	This feature is available for tracks in Radio only. If thumbs down is selected, the current
*5	track is skipped.
	Available for tracks in Playlists only.

Save favorite song information

While listening to the Radio on Spotify...

Press and hold the volume knob.

“SAVED” appears and the information is stored to “Your Music” or “Your Library” on your Spotify account.

To unsave, repeat the same procedure.

“REMOVED” appears and the information is removed from “Your Music” or “Your Library” on your Spotify account.

Search for a song or station

1 Press .

2Turn the volume knob to select a list type, then press the knob.

The list types displayed differ depending on the information sent from Spotify.

3 Turn the volume knob to select the desired song or station.

4Press the volume knob to confirm.

You can browse through the list quickly by turning the volume knob quickly.

To cancel, press and hold .

14 ENGLISH

BLUETOOTH®

BLUETOOTH — Connection

Supported Bluetooth profiles

–Hands-Free Profile (HFP)

–Advanced Audio Distribution Profile (A2DP)

–Audio/Video Remote Control Profile (AVRCP)

–Serial Port Profile (SPP)

–Phonebook Access Profile (PBAP)

Supported Bluetooth codecs

–Sub Band Codec (SBC)

–Advanced Audio Coding (AAC)

Connect the microphone

Rear panel

Microphone (supplied)

Microphone input jack

Adjust the

microphone angle

Secure using cord clamps (not supplied) if necessary.

Pair and connect a Bluetooth device for the first time

1 Press to turn on the unit.

2Search and select this unit model name (KDC-X7***DAB) on the Bluetooth device.

“PAIRING” “PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” appears on the display.

•For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately after searching.

3Press the volume knob to start pairing.

“PAIRING OK” appears when pairing is completed.

Once pairing is completed, Bluetooth connection is established automatically.

•“BT1” and/or “BT2” indicator on the faceplate lights up.

•This unit supports Secure Simple Pairing (SSP).

•Up to five devices can be registered (paired) in total.

•Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device, 19, [DEVICE DELETE].

•A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time.

However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. ( 20)

•Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually.

•Refer to the instruction manual of the Bluetooth device for more information.

Auto Pairing

When you connect iPhone/iPod touch/Android device to the USB input terminal, pairing request (via Bluetooth) is automatically activated.

Press the volume knob to pair once you have confirmed the device name.

Automatic pairing request is activated only if:

–Bluetooth function of the connected device is turned on.

–[AUTO PAIRING] is set to [ON]. ( 19)

–KENWOOD MUSIC PLAY application is installed on the Android device ( 11) and

[BROWSE MODE] is selected. ( 12)

ENGLISH 15

BLUETOOTH®

BLUETOOTH — Mobile phone

KEY

Receive a call

When there is an incoming call:

•The KEY zone illuminates in green color and flashes.

•The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. (17)

During a call:

•The LCD DISPLAY zone illuminates according to the settings made for [DISPLAY] (26) and the KEY zone illuminates in green color.

•If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.

The following operations may differ or not available depending on the connected phone.

	To	On the faceplate
First incoming call...
	Answer a call	Press	or the volume knob or one of
		the number buttons (1 to 6).
	Reject a call	Press	.
	End a call	Press	.

While talking on the first incoming call...

	Answer another incoming	Press .
	call and hold the current
	call
	Reject another incoming	Press	.
	call
While having two active calls...
	End current call and	Press	.
	activate held call
	Swap between the current	Press .
	call and held call
Adjust the phone volume		Turn the volume knob during a call.
[00] to [35] (Default: [15])		• This adjustment will not affect the
		volume of the other sources.
Switch between hands-free		Press	during a call.
and private talk modes		• Operations may vary according to the
		connected Bluetooth device.

16 ENGLISH

BLUETOOTH®

Improve the voice quality

While talking on the phone...

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select an item (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

	Default: XX
MIC GAIN	LEVEL –10 to LEVEL +10 (LEVEL –4): The sensitivity of the
	microphone increases as the number increased.
NR LEVEL	LEVEL –5 to LEVEL +5 (LEVEL 0): Adjust the noise reduction level until
	the least noise is being heard during a phone conversation.
ECHO CANCEL	LEVEL –5 to LEVEL +5 (LEVEL 0): Adjust the echo cancellation delay
	time until the least echo is being heard during a phone conversation.

Make the settings for receiving a call 1 Pressto enter Bluetooth mode.

2Turn the volume knob to select an item (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and holdto exit.

To return to the previous setting item, press.

	Default: XX
SETTINGS
AUTO ANSWER	1 to 30: The unit answers incoming call automatically in the selected
	time (in seconds). ; OFF: Cancels.
BATTERY/	AUTO: Shows the strength of the battery and signal when the unit
SIGNAL*	detects a Bluetooth device and the Bluetooth device is connected. ;
	OFF: Cancels.

* Functionality depends on the type of the phone used.

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature.

1Press to enter Bluetooth mode.

“(First device name)” appears.

•If two Bluetooth phones are connected, press again to switch to another phone.

“(Second device name)” appears.

2Turn the volume knob to select an item (see the following table), then press the knob.

3Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

CALL HISTORY (Applicable only if the phone supports PBAP.)

1Press the volume knob to select a name or a phone number.

•“INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the display to indicate the previous call status.

•Press DISP to change the display category (NUMBER or NAME).

•“NO DATA” appears if there is no recorded call history.

2 Press the volume knob to call.

ENGLISH 17

BLUETOOTH®

PHONE BOOK (Applicable only if the phone supports PBAP.)

1Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains many contacts).

The first menu (ABCDEFGHIJKLMN) appears.

•To go to the other menu (OPQRSTUVWXYZ1), press J/ K.

•To select the desired first letter, turn the volume knob or press S / T, then press the knob.

Select “1” to search with numbers and select “” to search with symbols.

2 Turn the volume knob to select a name, then press the knob.

3Turn the volume knob to select a phone number, then press the knob to call.

•The phonebook of the connected phone is automatically transferred to the unit when pairing.

•Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL.

•This unit can display only non-accent letters. (Accent letters such as “Ú” is shown as “U”.)

NUMBER DIAL	1 Turn the volume knob to select a number (0 to 9) or character
	( , #, +).

2Press S / T to move the entry position.

Repeat steps 1 and 2 until you finish entering the phone number.

3 Press the volume knob to call.

VOICE	Speak the name of the contact you want to call or the voice command to
	control the phone functions. ( Make a call using voice recognition)

BATTERY LVL LOW/MID/FULL*: Shows the strength of the battery.

NO SIGNAL/SIGNAL LVL LOW/MID/MAX*: Shows the strength of the current received signal.

* Functionality depends on the type of the phone used.

Make a call using voice recognition

1Press and hold to activate the voice recognition of the connected phone.

2Speak the name of the contact you want to call or the voice command to control the phone functions.

•Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details.

•This unit also supports the intelligent personal assistant function of iPhone.

Settings in memory

Store a contact in memory

You can store up to 6 contacts into the number buttons (1 to 6).

1 Press to enter Bluetooth mode.

2Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or [NUMBER DIAL], then press the knob.

3Turn the volume knob to select a contact or enter a phone number.

If a contact is selected, press the volume knob to show the phone number.

4Press and hold one of the number buttons (1 to 6).

“STORED” appears when the contact is stored.

To erase a contact from the preset memory, select [NUMBER DIAL] in step 2 and store a blank number.

Make a call from memory

1 Press to enter Bluetooth mode.

2 Press one of the number buttons (1 to 6).

3Press the volume knob to call.

“NO MEMORY” appears if there is no contacts stored.

18 ENGLISH

BLUETOOTH®

Other settings

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select an item (see the following table), then press the knob.

3Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.

4 Press and hold

to exit.

To return to the previous setting item, press .

Default: XX

BT MODE

PHONE SELECT

AUDIO SELECT

Selects the phone or audio device to connect or disconnect. “*” appears in front of the device name when connected. “ ” appears in front of the current playback audio device.

•You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at any time.

DEVICE DELETE	1	Turn the volume knob to select a device to delete, then press the knob.
	2	Turn the volume knob to select [YES] or [NO], then press the knob.
PIN CODE EDIT	Changes the PIN code (up to 6 digits).
(0000)	1	Turn the volume knob to select a number.
	2	Press S / T to move the entry position.
	3	Repeat steps 1 and 2 until you finish entering the PIN code.
		Press the volume knob to confirm.
RECONNECT	ON: The unit automatically reconnect when the last connected Bluetooth
	device is within range. ; OFF: Cancels.
AUTO PAIRING	ON: The unit automatically pair supported Bluetooth device (iPhone/
	iPod touch/Android device) when it is connected through USB input
	terminal. Depending on the operating system of the connected device,
	this function may not work. ; OFF: Cancels.
INITIALIZE	YES: Initializes all the Bluetooth settings (including stored pairing,
	phonebook, and etc.). ; NO: Cancels.

Bluetooth test mode

You can check the connectivity of the supported profile between the Bluetooth device and the unit.

• Make sure there is no Bluetooth device paired.

1Press and hold .

“PLEASE PAIR YOUR PHONE PIN 0000” appears.

2Search and select this unit model name (KDC-X7***DAB) on the Bluetooth device.

3Operate the Bluetooth device to confirm pairing.

“TESTING” flashes on the display.

The connectivity result (OK or NG) appears after the test.

PAIRING:	Pairing status
HF CONNECT:	Hands-Free Profile (HFP) compatibility
AUDIO CONNECT:	Advanced Audio Distribution Profile (A2DP)
	compatibility
PHONEBOOK DL:	Phonebook Access profile (PBAP) compatibility

To cancel test mode, press and hold to turn off the unit.

ENGLISH 19

BLUETOOTH®

BLUETOOTH — Audio

While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices.

To	On the faceplate
Switch between connected	Press 5.*
Bluetooth audio devices

*Pressing the “Play” key on the connected device itself also causes switching of sound output from the device.

Operations and display indications may differ according to their availability on the connected device.

Audio player via Bluetooth

1 Press	repeatedly to select BT AUDIO.
2 Operate the Bluetooth audio player to start playback.
To		On the faceplate
Playback/pause		Press	.
Select group or folder		Press J/ K.
Reverse/Forward skip		Press S / T.
Reverse/Fast-forward		Press and hold S / T.
Repeat play		Press	repeatedly.
		ALL REPEAT, FILE REPEAT, REPEAT OFF
Random play		Press and hold		to select
		ALL RANDOM.
		• Press	to select RANDOM OFF.
Select a file from a folder/list		Refer to “Select a file from a folder/list”
		on page 12.

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth).

Preparation:

Install the latest version of KENWOOD Remote application on your device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select an item ( 21), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

20 ENGLISH

BLUETOOTH®

		Default: XX
REMOTE APP
SELECT		Select the device (IOS or ANDROID) to use the application.
	IOS	YES: Selects iPhone/iPod to use the application via Bluetooth or connected via
		USB input terminal. ; NO: Cancels.
		If IOS is selected, select iPod BT source (or iPod 1/iPod 2 if your iPhone/iPod is
		connected via USB input terminal) to activate the application.
		• The connectivity of the application will be interrupted or disconnected if:
		– You change from iPod BT source to any playback source connected via the
		USB input terminal.
		– You change from iPod 1/iPod 2 source to iPod BT source.
	ANDROID	YES: Selects Android smartphone to use the application via Bluetooth. ;
		NO: Cancels.

ANDROID LIST*: Selects the Android smartphone to use from the list.

STATUS	Shows the status of the selected device.
	IOS CONNECTED: You are able to use the application using the iPhone/iPod
	connected via Bluetooth or USB input terminal.
	IOS NOT CONNECTED: No IOS device is connected to use the application.
	ANDROID CONNECTED: You are able to use the application using the Android
	smartphone connected via Bluetooth.
	ANDROID NOT CONNECTED: No Android device is connected to use the
	application.

* Displayed only when [ANDROID] of [SELECT] is set to [YES].

Listen to iPhone/iPod via Bluetooth

You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.

Press repeatedly to select iPod BT.

•You can operate the iPod/iPhone in the same way as iPod/iPhone via USB input terminal. ( 11)

•If you plug in an iPhone/iPod to the USB input terminal while listening

to iPod BT source, the source automatically change to iPod 1/iPod 2. Press to select iPod BT if the device is still connected via Bluetooth.

Internet radio via Bluetooth

You can listen to Spotify on the iPhone/iPod/Android device via Bluetooth on this unit.

• Make sure the USB input terminal is not connected to any device.

Listen to Spotify

Preparation:

Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 5)

1 Open the Spotify application on your device.

2 Connect your device via Bluetooth connection. ( 15)

3Press repeatedly to select SPOTIFY (for iPhone/iPod) or SPOTIFY BT (for Android device).

The source switches and broadcast starts automatically.

•You can operate Spotify in the same way as Spotify via USB input terminal. ( 13)

ENGLISH 21

AUDIO SETTINGS

While listening to any source...

1 Press AUDIO to enter [AUDIO CONTROL] directly.

2Turn the volume knob to select an item (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

			Default: XX
AUDIO CONTROL
SUB-W LEVEL		LEVEL –50 to LEVEL +10 (LEVEL 0): Adjusts the subwoofer
		output level.
MANUAL EQ		The sound elements (frequency level, tone level, Q factor) are
		preset into each selection.
	62.5HZ LEVEL	LEVEL	LEVEL –9 to LEVEL +9 (LEVEL 0): Adjusts
			the level to memorize for each source. (Before
			making an adjustment, select the source you
			want to adjust.)
		BASS	ON: Turns on the extended bass. ; OFF: Cancels.
		EXTEND

100 HZ/160 HZ/250 HZ/

400 HZ/630 HZ/1 KHZ/ 1.6KHZ/2.5KHZ/4 KHZ/ 6.3KHZ/10 KHZ/16 KHZ LEVEL

LEVEL –9 to LEVEL +9 (LEVEL 0): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

Q FACTOR	1.35/1.50/2.00: Adjust the quality factor.
PRESET EQ	NATURAL/ROCK/POPS/EASY/TOP40/JAZZ/POWERFUL/
	USER: Selects a preset equalizer suitable to the music genre.
	(Select [USER] to use the settings made in [MANUAL EQ].)
BASS BOOST	LEVEL1/LEVEL2/LEVEL3/LEVEL4/LEVEL5: Selects your
	preferred bass boost level. ; OFF: Cancels.

	LOUDNESS		LEVEL1/LEVEL2: Selects your preferred low and high frequencies boost
			to produce a well-balanced sound at a low volume level. ; OFF: Cancels.
	SUBWOOFER SET		ON: Turns on the subwoofer output. ; OFF: Cancels.
	FADER		(Not applicable if 3-way crossover is selected.)
			REAR 15 to FRONT15 (0): Adjusts the rear and front speaker output
			balance.
	BALANCE		LEFT 15 to RIGHT15 (0): Adjusts the left and right speaker output
			balance.
	VOLUME OFFSET		LEVEL –15 to LEVEL +6 (LEVEL 0): Preset the initial volume level of
			each source. (Before adjustment, select the source you want to adjust.)
	SOUND EFFECT
		SOUND	(Not applicable for RADIO source, DIGITAL AUDIO source and AUX source.)
		RECONSTRA	ON: Creates realistic sound by compensating the high-frequency
		(Sound	components and restoring the rise-time of the waveform that are lost
		reconstruction)	in audio data compression. ; OFF: Cancels.
		SPACE	(Not applicable for RADIO source and DIGITAL AUDIO source.)
		ENHANCER	SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ;
			OFF: Cancels.
		SOUND REALIZER	LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ;
			OFF: Cancels.
		STAGE EQ	LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from
			the speakers. ; OFF: Cancels.
		DRIVE EQ	ON: Boosts the frequency to reduce the noise heard from outside the
			car or running noise of the tyres. ; OFF: Cancels.
	SPEAKER SIZE		Depending on the crossover type you have selected ( 6), 2-way
			crossover or 3-way crossover setting items will be shown.
	X’OVER
			( 23, 24) By default, 2-way crossover type is selected.
	DTA SETTINGS		For settings, 24, 25, Digital Time Alignment settings.
	CAR SETTINGS

• [SUB-W LEVEL] is selectable only if [SUBWOOFER SET] is set to [ON].

22 ENGLISH

AUDIO SETTINGS

Crossover settings

Below are the available setting items for 2-way crossover and 3-way crossover.

SPEAKER SIZE

Selects according to the connected speaker size for optimum performance.

•The frequency and slope settings are automatically set for the crossover of the selected speaker.

•When 2-way crossover is selected, if [NONE] is selected for [TWEETER] of [FRONT], [REAR] and [SUBWOOFER] for

[SPEAKER SIZE], the [X ‘ OVER] setting of the speaker is not available.

•When 3-way crossover is selected, if [NONE] is selected for [WOOFER] of [SPEAKER SIZE], the [X’OVER] setting of

[WOOFER] is not available.

X ‘ OVER

•[FRQ]/[FRONT-HPF FRQ]/[REAR-HPF FRQ]/[SW LPF FRQ]/

[HPF FRQ]/[LPF FRQ]: Adjusts the crossover frequency for the selected speakers (high pass filter or low pass filter). If [THROUGH] is selected, all signals are sent to the selected speakers.

•[FRONT-HPF SLOPE]/[REAR-HPF SLOPE]/[SW LPF SLOPE]/ [HPF SLOPE]/[LPF SLOPE]/[SLOPE]: Adjusts the crossover slope.

Selectable only if a setting other than [THROUGH] is selected for the crossover frequency.

•[SW LPF PHASE]/[PHASE]: Selects the phase of the speaker output to be in line with the other speaker output.

•[GAIN LEFT]/[GAIN RIGHT]/[FRONT-HPF GAIN]/[REAR-HPF GAIN]/

[SW LPF GAIN]/[GAIN]: Adjusts the output volume of the selected speaker.

2-way crossover setting items

SPEAKER SIZE

	FRONT	SIZE	8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/
			6×9/7×10
		TWEETER	SMALL/MIDDLE/LARGE/NONE (not connected)
	REAR	8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9/7×10/NONE
		(not connected)
	SUBWOOFER* 16CM/20CM/25CM/30CM/38CM OVER/NONE (not connected)
X ' OVER
	TWEETER	FRQ	1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/10KHZ/
			12.5KHZ
		GAIN LEFT	–8 to 0
		GAIN RIGHT	–8 to 0
	FRONT HPF	FRONT-HPF FRQ	30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/
			150HZ/180HZ/220HZ/250HZ/THROUGH
		FRONT-HPF SLOPE	–6DB/–12DB/–18DB/–24DB
		FRONT-HPF GAIN	–8 to 0
	REAR HPF	REAR-HPF FRQ
			(Refer FRONT HPF settings above.)
		REAR-HPF SLOPE
		REAR-HPF GAIN
	SUBWOOFER	SW LPF FRQ	30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/
	LPF*		150HZ/180HZ/220HZ/250HZ/THROUGH
		SW LPF SLOPE	–6DB/–12DB/–18DB/–24DB
		SW LPF PHASE	REVERSE (180°)/NORMAL (0°)
		SW LPF GAIN	–8 to 0

* Selectable only when [SUBWOOFER SET] is set to [ON]. ( 22)

ENGLISH 23

AUDIO SETTINGS

3-way crossover setting items

SPEAKER SIZE

	TWEETER	SMALL/MIDDLE/LARGE
	MID RANGE	8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9
	WOOFER*	16CM/20CM/25CM/30CM/38CM OVER/NONE (not connected)
X ' OVER
	TWEETER	HPF FRQ	1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/
			10KHZ/12.5KHZ
		SLOPE	–6DB/–12DB
		PHASE	REVERSE (180°)/NORMAL (0°)
		GAIN	–8 to 0
	MID RANGE	HPF FRQ	30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/
			120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH
		HPF SLOPE	–6DB/–12DB
		LPF FRQ	1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/
			10KHZ/12.5KHZ/THROUGH
		LPF SLOPE	–6DB/–12DB
		PHASE	REVERSE (180°)/NORMAL (0°)
		GAIN	–8 to 0
	WOOFER*	LPF FRQ	30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/
			120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH
		SLOPE	–6DB/–12DB
		PHASE	REVERSE (180°)/NORMAL (0°)
		GAIN	–8 to 0

* Selectable only when [SUBWOOFER SET] is set to [ON]. ( 22)

Digital Time Alignment settings

Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle.

•For more information, 25, Determining the value for [DISTANCE] and

[GAIN] of [DTA SETTINGS].

DTA SETTINGS

	POSITION	Selects your listening position (reference point).
		ALL: Not compensating ; FRONT RIGHT: Front right seat ;
		FRONT LEFT: Front left seat ; FRONT ALL: Front seat
		• [FRONT ALL] is displayed only when [2-WAY X’OVER] is selected.
		( 6)
	DISTANCE	0CM to 610CM: Fine adjust the distance to compensate.
		(Before making an adjustment, select the speaker you want to adjust.)
	GAIN	–8DB to 0DB: Fine adjust the output volume of the selected speaker.
		(Before making an adjustment, select the speaker you want to adjust.)
	DTA RESET	YES: Resets the settings ([DISTANCE] and [GAIN]) of the selected
		[POSITION] to default. ; NO: Cancels.
CAR SETTINGS		Identify your car type and rear speaker location in order to make the
		adjustment for [DTA SETTINGS].
	CAR TYPE	COMPACT/FULL SIZE CAR/WAGON/MINIVAN/SUV/
		MINIVAN(LONG): Selects the type of vehicle. ;
		OFF: Not compensating.
	REAR-SP	Selects the location of the rear speakers in your vehicle to calculate the
	LOCATION	furthest distance from the listening position selected (reference point).
		• DOOR/REAR DECK: Selectable only when [CAR TYPE] is selected as
		[OFF], [COMPACT], [FULL SIZE CAR], [WAGON] or [SUV].
		• 2ND ROW/3RD ROW: Selectable only when [CAR TYPE] is selected
		as [MINIVAN] or [MINIVAN(LONG)].

24 ENGLISH

AUDIO SETTINGS

•Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], select the speaker you want to adjust:

When 2-way crossover is selected:

FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER

–You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting other than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. ( 23)

When 3-way crossover is selected:

TWEETER LEFT/TWEETER RIGHT/MID LEFT/MID RIGHT/WOOFER

–You can only select [WOOFER] if a setting other than [NONE] is selected for [WOOFER] of

[SPEAKER SIZE]. ( 24)

•[REAR-SP LOCATION] of [CAR SETTINGS] is selectable only if:

–2-way crossover is selected. ( 6)

–A setting other than [NONE] is selected for [REAR] of [SPEAKER SIZE]. ( 23)

Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]

If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set.

1 Determine the center of the currently set listening position as the reference point.

2 Measure the distances from the reference point to the speakers.

3 Calculate the differences between the distance of the furthest speaker (rear speaker) and other speakers.

4 Set the [DISTANCE] calculated in step 3 for individual speakers.

5 Adjust [GAIN] for individual speakers.

Example: When [FRONT ALL] is selected as the listening position

DISPLAY SETTINGS

Zone identification for color and brightness settings

Set the dimmer

Press and hold DISP to turn on or off the dimmer.

•If you have set [DIMMER TIME] (26), it will be canceled once you press and hold this button.

Other settings

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select an item (26), then press the knob.

3Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.

4 Press and holdto exit.

To return to the previous setting item, press.

ENGLISH 25

DISPLAY SETTINGS

Default: XX

DISPLAY

COLOR	Select color for ALL ZONE, LCD DISPLAY and KEY separately.
SELECT	1 Select a zone. (See the illustration on page 25.)
	2	Select a color for the selected zone.
		INITIAL COLOR/VARIABLE SCAN/CUSTOM R/G/B/preset colors*
	To make your own color, select [CUSTOM R/G/B]. The color you have made
	will be stored in [CUSTOM R/G/B].
	1	Press the volume knob to enter the detailed color adjustment.
	2	Press S / T to select the color (R/G/B) to adjust.
	3	Turn the volume knob to adjust the level (0 to 9), then press the knob.
DIMMER	Dim the illumination.
	ON: Dimmer is turned on. ; OFF: Cancels.
	DIMMER TIME: Set the dimmer on and off time.
	1	Turn the volume knob to adjust the [ON] time, then press the knob.
	2	Turn the volume knob to adjust the [OFF] time, then press the knob.
	(Default: [ON]: 18:00; [OFF]: 6:00)
BRIGHTNESS	1 Select a zone. (See the illustration on page 25.)
	2	LEVEL 0 to LEVEL 31: Select your preferred brightness level for the
		selected zone.
TEXT SCROLL	AUTO/ONCE: Select whether to scroll the display information automatically,
	or scroll only once. ; OFF: Cancels.

*Preset colors: RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1/ BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1/ GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/ORANGE2/

ORANGERED

TROUBLESHOOTING

	Symptom		Remedy
		Sound cannot be heard.	• Adjust the volume to the optimum level.
			• Check the cords and connections.
		“MISWIRING CHECK WIRING	Turn the power off, then check to be sure the
		THEN POWER ON” appears.	terminals of the speaker wires are insulated
			properly. Turn the power on again.
	General
		“PROTECTING SEND TO	Send the unit to the nearest service center.
		SERVICE” appears.
		• Sound cannot be heard.	Clean the connectors. ( 29)
		• The unit does not turn on.
		• Information shown on the
		display is incorrect.
		The unit does not work at all.	Reset the unit. (		3)
		DAB reception is poor.	Make sure [ON] is selected for [DAB ANT POWER].
			(	5)
	Radio
		“DAB ANT ERROR”	Check the DAB antenna. If a passive antenna
	Digital		(without a booster) is used, set [DAB ANT POWER]
			to [OFF]. ( 5)
		“RELATED SERVICE FOUND”	• Press the volume knob to activate Soft-Link.
			•	( 8)
				Press	to cancel.
	Analog Radio	• Radio reception is poor.	Connect the antenna firmly.
		• Static noise while listening
		to the radio.

26 ENGLISH