CD RECEIVER
KD-G162/KD-G161
KD-G162
KD-G162
KD-G161
KD-G161
For canceling the display demonstration, see page 5.
For installation and connections, refer to the separate manual.
INSTRUCTIONS
GET0334-003A
[EX/EU]
ENGLISH
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1.CLASS 1 LASER PRODUCT
2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
3.CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.
4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Warning:
If you need to operate the unit while driving, be sure to look ahead carefully or you may be involved in a traffic accident.
How to reset your unit
How to detach/attach the control panel
Detaching...
• Your preset adjustments will also be erased.
How to forcibly eject a disc
Attaching...
• If this does not work, reset your unit.
• Be careful not to drop the disc when it ejects.
Note: Only for [EX] model users in UK and European countries
For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on the unit’s chassis.
Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.
2
How to read this manual
•Button operations are mainly explained with the illustrations in the table below.
• is used to indicate an indicator is displayed for the correspnding operation.
•Some related tips and notes are explained in “More about this unit” (see pages 14 and 15).
Press briefly.
Press repeatedly.
Press either one.
Press and hold until your desired response begins.
Press and hold both buttons at the same time.
How to use the M MODE button
If you press M MODE, the unit goes into functions mode, then the number buttons work as different function buttons.
Ex.: When number button 2 works as MO (monaural) button.
CONTENTS
|
|
|
ENGLISH |
|
Control panel — KD-G162 and KD-G161 |
4 |
|||
|
||||
Getting started................................. |
5 |
|
||
Basic operations.................................................... |
5 |
|
||
Radio operations .............................. |
6 |
|
||
FM RDS operations............................ |
7 |
|
||
Searching for your favorite FM RDS programme ... |
7 |
|
||
Disc operations................................. |
9 |
|
||
Playing a disc in the unit ...................................... |
9 |
|
||
Sound adjustments........................... |
10 |
|
||
General settings — PSM ................... |
11 |
|
||
Maintenance .................................... |
13 |
|
||
More about this unit ......................... |
14 |
|
||
Troubleshooting............................... |
16 |
|
||
Specifications................................... |
17 |
|
Caution on volume setting:
Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.
Time countdown indicator
To use these buttons for their original functions again after pressing M MODE, wait for 5 seconds without pressing any of these buttons until the functions mode is cleared or press M MODE again.
For safety...
•Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.
•Stop the car before performing any complicated operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.
3
ENGLISH
Control panel — KD-G612/KD-G611/KD-G511 KD-G162 and KD-G161
Parts identification
Display window
1 |
|
|
(standby/on/attenuator) button |
|
|
||
|
|
||
2 |
SOURCE button |
||
3 |
BAND button |
||
4 |
Loading slot |
||
5 |
Display window |
||
6 |
0(eject) button |
7TP/PTY (traffic programme/programme type) button
8 ¢/4buttons
9 Control dial
p SEL (select) button q DISP (display) button w EQ (equalizer) button
e MO (monaural) button
rSSM (Strong-station Sequential Memory) button
t Number buttons y RPT (repeat) button
u RND (random) button
i M MODE button
o (control panel release) button
Display window
; DISC indicator
a RND (disc random) indicator s RPT (repeat) indicator
d LOUD (loudness) indicator f EQ (equalizer) indicator
g Sound mode (C-EQ: custom equalizer) indicators—JAZZ, CLASSIC, HIP HOP, POPS, ROCK, USER
hSource display / Volume level indicator / Time countdown indicator
j Main display
k RDS indicators—TP, PTY, AF, REG
lTuner reception indicators—ST (stereo), MO (monaural)
4
Getting started
Basic operations
~ Turn on the power.
Ÿ
*You cannot select “DISC” as the playback source if there is no disc in the unit.
!For FM/AM tuner
⁄ Adjust the volume.
Volume level appears.
Volume level indicator
@Adjust the sound as you want. (See page 10.)
To drop the volume in a moment (ATT)
To restore the sound, press it again.
To turn off the power
Basic settings |
ENGLISH |
|
• See also “General settings — PSM” on pages |
||
|
||
11 and 12. |
|
|
1 |
|
2
1 Canceling the display demonstrations
Select “DEMO,” then “DEMO OFF.”
2Setting the clock
Select “CLOCK H” (hour), then adjust the hour.
Select “CLOCK M” (minute), then adjust the minute.
Select “24H/12H,” then “24H” (hour) or “12H” (hour).
3 Finish the procedure.
To check the current clock time while...
The power is turned off
Listening to...
An FM (non-RDS) or AM station:
Frequency ÔClock
An FM RDS station:
Station name (PS) =Station Frequency = Programme type (PTY) =Clock =(back to the beginning)
Listening to a disc...
Elapsed playing time with track number Ô
Clock
5
ENGLISH
Radio operations
~
Ÿ
Lights up when receiving an FM stereo broadcast with sufficient signal strength.
Selected band appears.
! Start searching for a station.
When a station is received, searching stops.
To stop searching, press the same button again.
To tune in to a station manually
In step ! above...
1
2 Select the desired station frequencies.
When an FM stereo broadcast is hard to receive
Lights up when monaural mode is activated.
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting— SSM (Strong-station Sequential Memory)
1Select the FM band (FM1 – FM3) you want to store into.
2
3
“SSM” flashes, then disappears when automatic presetting is over.
Local FM stations with the strongest signals are searched and stored automatically in the FM band.
6